PDA

View Full Version : MVHD HD800C-VI unable to scan any channels


terakoh
17th August, 2013, 06:42 AM
Hi, My MVHD is unable to scan any channels when I used auto scan.
I plugged the cable to the "Cable TV Ready System" point at my wall socket.

The scanning results all stated failed.

Information of my box.

Brand: XXXX
CID : 21009
App Ver: v2.5.0
Loader Version: 1.1
Released Date: 28-03-2013

I have also tried upgrading the firmware at ******** but the result is the same.
The released date is still 28-03-2013.

Can anybody help? Thanks a lot.
terakoh
17th August, 2013, 11:18 AM
It turned out to be that my cable point has not been activated.
The MVHD is able to work at another house.

Any idea how to get the cable point activated so that I can receive SH signal? Thanks.
Pokemon999
17th August, 2013, 11:20 AM
You need to subscribe to SH.
uu161
17th August, 2013, 11:21 AM
It turned out to be that my cable point has not been activated.
The MVHD is able to work at another house.

Any idea how to get the cable point activated so that I can receive SH signal? Thanks.

must be in newer flat
very simple Subscribe S*****b.
terakoh
17th August, 2013, 03:03 PM
Yeah, in newer flat.

So the only way is to subscribe to SH? Able to just change the input source from Master antenna to SH point at the TV box outside the house?
Doesn't seem to work when I tried just now. Or maybe I did it wrongly.

I am able to receive Indo and TV2 so I am on Master antenna right?


Thanks.


must be in newer flat
very simple Subscribe S*****b.
almar01sg
17th August, 2013, 05:00 PM
you are in high rise antenna. i call it analogue signal and sh signal call digital signal.
go out yr house find yr address the cable and switch to sh port
terakoh
17th August, 2013, 06:02 PM
I am unable to receive 743.25MHz
Have tried opened the riser and the scv box outside my house and saw 4 splitters. I think 2 splitters (Think 1 input 3 outputs) are mine and 2 are for my neighbour.
I checked that the input of my 2 splitters are connected to a panel. Is that supposed to be SH panel? I also saw two cables (Labeled my unit) hanging inside the box.

For my neighbour one, it seems that the two hanging cables are connected to the input of the splitter.
I tried connecting the 2 hanging cables to the splitters but that doesn't help. I am unable to get any signal at all.

How do I check if I am connected to the SH port or Master Antenna?



you are in high rise antenna. i call it analogue signal and sh signal call digital signal.
go out yr house find yr address the cable and switch to sh port