Pls help! Im using dm800hd pvr..cant seems to auto scan channel to get bpl chn.

[dantom04]

Hi all,

got hold of a dm 800 hd pvr, but when i on it and reliased that it does not have the bpl channel//so i did an auto scan which does show the miotv channel being scan n found but when i exit the menu i cant find them? What went wrong? Can someone please advise?
thanks

[shidevil]

Manual Scan.

Manual Search for 135500 symb rate 6090 and 149500 symb rate 6090

[dantom04]

Thanks, can u guide me how to do it?



Manual Scan.

Manual Search for 135500 symb rate 6090 and 149500 symb rate 6090

[DBTraitor]

Bro
Go and explore your box and see what you have in the menu
Thats the way to understand and learn

[dantom04]

I can only input 3 digit for frequency.... Can't put 6 digit



Manual Scan.

Manual Search for 135500 symb rate 6090 and 149500 symb rate 6090

[trident47]

Manual Search for 128500 symb rate 6090

[shidevil]

then put 135 and 149

if can put decimal.

135.5 and 149.5

[ypvs125]

Hi all,

got hold of a dm 800 hd pvr, but when i on it and reliased that it does not have the bpl channel//so i did an auto scan which does show the miotv channel being scan n found but when i exit the menu i cant find them? What went wrong? Can someone please advise?
thanks

Download below bouquet folder. Use dreamboxedit. Click open and choose the downloaded folder and it will show all the channels listing. Click on FTP>Reload settings on Dreambox>Send Files to Dreambox> Restart Enigma and that's it but make sure u have the correct settings in the option panel.
http://www.digital-kaos.co.uk/forums/f34/sgsh-bouquet-500c-800hd-800se-268645/index41.html#post2061801

[puptoon]

Hi all,

got hold of a dm 800 hd pvr, but when i on it and reliased that it does not have the bpl channel//so i did an auto scan which does show the miotv channel being scan n found but when i exit the menu i cant find them? What went wrong? Can someone please advise?
thanks
If I'm not wrong the channels are there you just need to find them. Press the right button on ur remote choose the blue button and select all channels then from there press down to find the channel.
I guess your channels are now all in a mess now after you did a auto scan (I did auto scan too and all the channels are not sorted). Just use the bouquet and you are good to go.

[dantom04]

Try all above cant work as I can only put 3 digit n I try putting only 3 digits also can't scan any. 0 services found

[dantom04]

Sorry, noob here... How do I do that? Need to connect to Internet?



Download below bouquet folder. Use dreamboxedit. Click open and choose the downloaded folder and it will show all the channels listing. Click on FTP>Reload settings on Dreambox>Send Files to Dreambox> Restart Enigma and that's it but make sure u have the correct settings in the option panel.
http://www.digital-kaos.co.uk/forums/f34/sgsh-bouquet-500c-800hd-800se-268645/index41.html#post2061801

[puptoon]

Sorry, noob here... How do I do that? Need to connect to Internet?
Mate, you gotto read,read,read
How to update channels for DM500C/DM800HD/800SE (http://www.singapore-dreambox.com/how-to-update-channels-for-dm500c-dm800hd-800se/)
http://www.digital-kaos.co.uk/forums/f34/sgsh-bouquet-500c-800hd-800se-268645/

[uu161]

Sorry, noob here... How do I do that? Need to connect to Internet?


master 125 already posted the thread link all anw u need is in there
don't even read like that how to learn?
in that thread got show video guide somemore

[puptoon]

master 125 already posted the thread link all anw u need is in there
don't even read like that how to learn?
in that thread got show video guide aswell
Nowadays people cannot read, just want watch bee pee ell only .

[uu161]

Nowadays people cannot read, just want watch bee pee ell only .

agree too nowday should let them learn the hardway will be better that why i didn't even post Sgsh bouquet online ver ( edit from astrobox)
only 2 bro posted and share it out in fourm

[Puddie]

Hmm.. Tried the manual scanning option and realize the open PLI image doesn't allow me to input decimals. Any idea how to get around this? Different image? Or somehow changing the units so I can input say 129500 instead of the regular 129? The box keeps on hanging whenever I'm at the faulty channels. Most frustrating.

[uu161]

Hmm.. Tried the manual scanning option and realize the open PLI image doesn't allow me to input decimals. Any idea how to get around this? Different image? Or somehow changing the units so I can input say 129500 instead of the regular 129? The box keeps on hanging whenever I'm at the faulty channels. Most frustrating.

u can't input .50 in maunal scan
only auto scan will get it

[redarmy10]

Hi if im using a clone dreambox any chance i can upgrade the firmware to tune in for BPL??? Thanks in advance

[uu161]

Hi if im using a clone dreambox any chance i can upgrade the firmware to tune in for BPL??? Thanks in advance

what u need is load bouquet using dbedit
how ? then check this thread link and read
SGSH Bouquet 500C/800HD/800SE (http://www.digital-kaos.co.uk/forums/f34/sgsh-bouquet-500c-800hd-800se-268645/)

[redarmy10]

Hi thanks for your reply. even if mine is a clone set from china, i can use method in the link? Sorry for my silly question, just worried i may screw up. Thanks !!

[Puddie]

u can't input .50 in maunal scan
only auto scan will get it

Ah...great. Cos I input it in DBedit but it still doesn't work. The channel details still says 129Mhz, for example. And I see a fuzzy neither here not there kind of picture. I guess it's low signal huh? Hope a new cable might fix this.

[uu161]

Ah...great. Cos I input it in DBedit but it still doesn't work. The channel details still says 129Mhz, for example. And I see a fuzzy neither here not there kind of picture. I guess it's low signal huh? Hope a new cable might fix this.

Dbedit will not show .50 even u use auto scan by dreambox then back up and load to dbedit

it was posted by master125 before use ur dreambox to check freq info by menu then click information

[uu161]

Hi thanks for your reply. even if mine is a clone set from china, i can use method in the link? Sorry for my silly question, just worried i may screw up. Thanks !!

doesn't matter is a clone or original it will work and if yours are not even a dm clone i don't think it will load in at all

[Puddie]

Dbedit will not show .50 even u use auto scan by dreambox then back up and load to dbedit

it was posted by master125 before use ur dreambox to check freq info by menu then click information

Ooh. My version of DBedit does, actually. The one by YASSINOV. I could input 129500 (edited master 125's bouquet). But no use also la, send to box, it shows 129. Just don't know if it's really ready 129 or 129.5. Hmmm

[uu161]

Ooh. My version of DBedit does, actually. The one by YASSINOV. I could input 129500 (edited master 125's bouquet). But no use also la, send to box, it shows 129. Just don't know if it's really ready 129 or 129.5. Hmmm

then just use dreambox to find out freq see isit the one you edit anyway i haven't use yassinov ver before hehe

u can pm me the file i check for you ^^

[Puddie]

then just use dreambox to find out freq see isit the one you edit anyway i haven't use yassinov ver before hehe

u can pm me the file i check for you ^^

That's the thing lor. I input 129.5 in DBedit but when I go to channel details it says 129? Right now just dunno if it's a firmware issue and whether the box is really reading 129.5 but states 129 there. It just can't work lor. Poor picture. AHhaa.. those frequency 150 channels at the end are perfectly fine. Fat lot of good that does lulz. Manually change it to 130 in the box and then tune fails.

[uu161]

That's the thing lor. I input 129.5 in DBedit but when I go to channel details it says 129? Right now just dunno if it's a firmware issue and whether the box is really reading 129.5 but states 129 there. It just can't work lor. Poor picture. AHhaa.. those frequency 150 channels at the end are perfectly fine. Fat lot of good that does lulz. Manually change it to 130 in the box and then tune fails.

i just download the ver u say the edit work fine
it show correct but i have not yet load in to dreambox
i will load in after 6:30pm when my Co going out lol

[uu161]

It work fine i have load in i guess maybe u forgot to reload or reboot

[Puddie]

It work fine i have load in i guess maybe u forgot to reload or reboot

Yo! Little update here. The box at my place, on OpenPLI image, couldn't load 226 to 231. Fuzzy, blur picture. I used Set 1 from master 125.

HOWEVER, another box, at friend's place running newnigma2 and almost identical to my box (bought almost same time), could work perfectly using Set 1. Nice 90 plus% signal. So I have to conclude is poor signal problem. Will change to newnigma2 and update again. Maybe that firmware works better. What a pity cos OpenPLI is so much faster.

At least I have a better idea now. :top:

[uu161]

Yo! Little update here. The box at my place, on OpenPLI image, couldn't load 226 to 231. Fuzzy, blur picture. I used Set 1 from master 125.

HOWEVER, another box, at friend's place running newnigma2 and almost identical to my box (bought almost same time), could work perfectly using Set 1. Nice 90 plus% signal. So I have to conclude is poor signal problem. Will change to newnigma2 and update again. Maybe that firmware works better. What a pity cos OpenPLI is so much faster.

At least I have a better idea now. :top:

ya give a try ^^ maybe ur friend live in low floor ^^
and u live in high floor ?

[puptoon]

Yo! Little update here. The box at my place, on OpenPLI image, couldn't load 226 to 231. Fuzzy, blur picture. I used Set 1 from master 125.

HOWEVER, another box, at friend's place running newnigma2 and almost identical to my box (bought almost same time), could work perfectly using Set 1. Nice 90 plus% signal. So I have to conclude is poor signal problem. Will change to newnigma2 and update again. Maybe that firmware works better. What a pity cos OpenPLI is so much faster.

At least I have a better idea now. :top:

Cabling might be the cause of poor signals. Change ur cables or open up the main wall point and check for any loose connect. U may want to unscrew and screw back the joint/connections. Cheers
BTW what cable are u using ? The black original one?

Sent from my Nexus 7 using Tapatalk HD

[Puddie]

ya give a try ^^ maybe ur friend live in low floor ^^
and u live in high floor ?

Nope. Both friend and I live on low floors. House to be exact. Hahhaa..

[Puddie]

Cabling might be the cause of poor signals. Change ur cables or open up the main wall point and check for any loose connect. U may want to unscrew and screw back the joint/connections. Cheers
BTW what cable are u using ? The black original one?

Sent from my Nexus 7 using Tapatalk HD

Using some generic cable that's never given me problems. As for cabling sigh. The person who did it for my house did a crap job and now I have to live with it :blue:

[puptoon]

Using some generic cable that's never given me problems. As for cabling sigh. The person who did it for my house did a crap job and now I have to live with it :blue:

Well that could explain for the poor signal that u are getting. But then I may be wrong. U really need to troubleshoot/narrow down the poor signals u are getting.

Sent from my Nexus 7 using Tapatalk HD

[ypvs125]

Yo! Little update here. The box at my place, on OpenPLI image, couldn't load 226 to 231. Fuzzy, blur picture. I used Set 1 from master 125.

HOWEVER, another box, at friend's place running newnigma2 and almost identical to my box (bought almost same time), could work perfectly using Set 1. Nice 90 plus% signal. So I have to conclude is poor signal problem. Will change to newnigma2 and update again. Maybe that firmware works better. What a pity cos OpenPLI is so much faster.

At least I have a better idea now. :top:
Could try this bouquet and see if the ch226-228 is still fuzzy.
http://www.digital-kaos.co.uk/forums/f34/sgsh-bouquet-500c-800hd-800se-268645/index41.html#post2061801

[uu161]

ya master 125 the one you post should work
don't need to prepare freq135 most of dm clone tuner won't work
notice u also start using older ver dbedit ^^

[ypvs125]

ya master 125 the one you post should work
don't need to prepare freq135 most of dm clone tuner won't work
notice u also start using older ver dbedit ^^
Used to the old version and never change to the latest. Some tuner are not sensitive enough with the newer frequency on sr6090.

[uu161]

Used to the old version and never change to the latest. Some tuner are not sensitive enough with the newer frequency on sr6090.


mine are using 135 no problem but what to do me die die want to use 135.5 lol and i fixed the signal issue ^^

[nottidude69]

Hi Y'all,
Ok I like to share with you all on my experiences.... I am using OpenPLi image and have set 8 channels on 136, 150, 129 frequencies and initially, got channels 101-103 fuzzy and 1/5 of screen appearing only with sporadic audio...pretty bad, but my other channels ie. 104-108 was perfect - and that was in my bedroom, while in my living room, I had all channels perfect...! After many attempts at trying out all kinds of resolutions eg. new better cables, new splitters placed at end of cable, at the SCV point connection outside of my flat, splitters at 2500MHz, and also finally tried a signal booster too - all failed miserably, and that was up to the 14th. Then suddenly, come 15th, when I rechecked the channels in the bedroom - all was perfectly fine! So I reckon it was due to perhaps SH boosting up their broadcasting signal quality???

[Puddie]

Could try this bouquet and see if the ch226-228 is still fuzzy.
http://www.digital-kaos.co.uk/forums/f34/sgsh-bouquet-500c-800hd-800se-268645/index41.html#post2061801

Hi master ypvs125,

Here's my experience.

First, on openPLI, Ch 226 - 231 were unwatchable. 1/8 screen, fuzzy, caused box to hang for Set 1. For Set 2, I got 'Tune failed' for Ch 226 - 231. Ch 232 and 233 were fine for both sets.

Then I went to my friend's house and his box was on newnigma (same box, same seller, bought a few weeks apart). Set 1 worked perfect for all!

So I came home and changed to the same version of newnigma, but got roughly the same problem as OpenPLI, 1/8 picture etc.

Turns out it was all a contact problem, thanks to bro ZM00061 for the tip! And soo.. newnigma worked fine for me on Set 1, signal went up from 73% to about 89% - 93% on Set 1.

-----

BUT, i preferred OpenPLI so I switched back (and also to experiment further). AND..here's the interesting bit.

For OpenPLI, Set 1 doesn't work that well. Ch 226 - 228 were fine, but 229 - 231 got 'Tune failed'.

So, I tried your third set, the one you released on 16 Aug, and that worked perfect with my OpenPLI!

So THANK YOU!

Conclusion from my end: Newnigma, use Set 1; OpenPLI, use 16 AUG bouquet


I hope other bros out there can learn from my experience! :top:

[Puddie]

Oh yes, to add,

I tried master uu161's bouquet too on newnigma and for some reason, it couldn't work at all. Couldn't even start. Was forever 'booting'. Don't know why? :blue:

Tried to add master uu161's picons too, but though I FTPed in, they didn't show up. Wonder if I got the folder wrong. Hmmmmm....

[vroom]

I can watch b*** p*** l*** since the season started.

However, suddenly it just become blank (black screen and no sound). i can still find it when doing the the scan and in the channel list.

Anyone knows why?

Thanks

[pirsquared8]

I can watch b*** p*** l*** since the season started.

However, suddenly it just become blank (black screen and no sound). i can still find it when doing the the scan and in the channel list.

Anyone knows why?

Thanks


pls read other recent posts of the past week and u will know why

[xylon]

Bid farewell to BPL.....and soon to other channels. Haish