Autocom green led going red by usb conect

[seba6772]

Hi I have gold clone autocom, when i conect device to usb port the green led going red and get message car controler not respond.
when conecting by bluetootch led stay green and conection some time working good some time not. i check all soldering, change diode marked on pictures and not succes. any idea??
sorry for my english and thanks
214557 214558

[seba6772]

Anyone any help?

[Hovi]

Hi,

what's your software version CDP, CDP+, CDP PRO?

Could you post a screen from Settings > Hardware settings when you performed a test.



Cheers

Petr

[seba6772]

It's cdp setting is ok interface firmware update going ok interface test going ok too. I buy tool with software 2011.3 later I made upgrade to 2012.3 - and don't remember but probably then start my problem, I'm back to 2011.3 software but problem not gone.
Sorry for my English and thanks for answers

[Hovi]

Looks like the diode behave right, I tried on my friends Autocom and it's the same as you described.

You are trying to go with old software version on the same computer? Because if your serial is banned in newer version, you are no longer able to run with the old version.

The easiest way is to try on another computer with the old version.

Banned serial could make problem like you described - VCI not found, car controller is not responding and so on. Are you able to hear the relays when Autocom trying to connect to the car?

[Hovi]

Hi again,

confirmed - with new firmware the "Test" LED constantly lights when has power on and connection with ECU. When communicating - flashes red.

Tested on two interfaces CDP, original bought with 2011.1 and 2011.3

For some fun I tried to change serial to another one than Autocom has been activated and there was several error message about VCI not found, no connection to the car, car unit not responding and so on.

Try to check your serial with software activation.

[seba6772]

Tthanks for answers
On new software working same as on old sometimes connect and sometimes not ok I will check on other computer

Wys***322;ane z mojego LG-P880 za pomoc***261; Tapatalk 4

[seba6772]

after instal on new windows all looks fine

Wysy***322;ane z mojego LG-P880 za pomoc***261; Tapatalk 2