new black hole

[hayd0n]

just put the new black hole on my duo how do i get a cam and tsmedia plz help

[benny/9]

just put the new black hole on my duo how do i get a cam and tsmedia plz help

*********************************************
for cams look in this thread for cams and how to load them

http://www.digital-kaos.co.uk/forums/f186/black-hole-1-7-6-cccam-287037/#post1662419

[hayd0n]

tryed mate put the etc and user in temp followed the step s saying upload a bh.tgz packaeg in the /temp directory before you can install addons

[cactikid]

have you downloaded plugins from the internet i think there might be stuff there,there was with ts panel.

[athenrybhoy]

create a new folder on desktop and name it bh cams ,unzip file containing cams and place them in it,conect to your duo with vucc/dcc ,on left side of screen look for bh cams in desktop click on it,on right side of screen double click tmp...back on left side right click and select upload on each of the cams ....go back to duo press green then yellow then press manual install bh packages ,should see your cams in there.....think i done this wrong first time ,sounds like what you are doing ,i was opening cams dont just drag and drop into the bh cams folder you create on desktop

[hayd0n]

right dun that now how do i find the cam to activate and put my file in it

[athenrybhoy]

press blue and scroll left or right to select

[athenrybhoy]

file u need to edit is in ect... you know the one ...

[hayd0n]

wont let my select a cam

[athenrybhoy]

what cam is selected when u press blue button

[athenrybhoy]

does it tell u how many cam are installed?

[hayd0n]

1 cam common interface

[athenrybhoy]

ok cams are not installed ,did u manually get to manually install bh packages

[hayd0n]

yep did that

[athenrybhoy]

ok my fault forgot to say reboot box... then try blue button should say how many cams,just scroll left/ right to select cam

[hayd0n]

about ready to smash the thing up ts panle aint installing and cant get a cam to run our install

[n4cer]

This was posted by benny9 I followed the instructions and hey presto it works. first in the folder you will find 4 cam packs take them out
but do not open them just transfer them to the tmp folder with your DCC
close the dcc then with the remote press green then yellow
then on the second line down manual install bh packages>ok
now you can see all the cams you sent to the box with the dcc
now just click>ok on each of them in turn and follow the on screen info
untill you have installed all of them,re boot the box and then when you press
blue you can select and change to which cam you want to use

[athenrybhoy]

This was posted by benny9 I followed the instructions and hey presto it works. first in the folder you will find 4 cam packs take them out
but do not open them just transfer them to the tmp folder with your DCC
close the dcc then with the remote press green then yellow
then on the second line down manual install bh packages>ok
now you can see all the cams you sent to the box with the dcc
now just click>ok on each of them in turn and follow the on screen info
untill you have installed all of them,re boot the box and then when you press
blue you can select and change to which cam you want to use
i thought i followed it exactly but i think i open each cam when unzipping then they dont show up in 'manually install bh packages'.... easier than ts panel

[n4cer]

i thought i followed it exactly but i think i open each cam when unzipping then they dont show up in 'manually install bh packages'.... easier than ts panel
You don't unzip the files you send the unzipped files to the temp directory on your box, then press green,yellow buttons then second line downselect manual install bh packages

[hayd0n]

when unzip them only get 1 etc 1 user is this right

[athenrybhoy]

i know that now..meant to say when i was extracting to a folder winrar must have opened them then they dont show up..... where u at haydOn

[n4cer]

Don't unzip them transfer the unzipped files to temp

[athenrybhoy]

ok double clicking on main cam file is unzipping it ,the tgz files inside just drag to your bh cam folder on desktop .. dont open

[hayd0n]

sorted i was uziping them thanks guys

[n4cer]

Just follow these instructions that benny9 posted first in the folder you will find 4 cam packs take them out
but do not open them just transfer them to the tmp folder with your DCC
close the dcc then with the remote press green then yellow
then on the second line down manual install bh packages>ok
now you can see all the cams you sent to the box with the dcc
now just click>ok on each of them in turn and follow the on screen info
untill you have installed all of them,re boot the box and then when you press
blue you can select and change to which cam you want to use

[athenrybhoy]

no bother had exactly same problem ...

[n4cer]

Glad you both got sorted. This is what the forums for to help people.:joyous:

[athenrybhoy]

its like when you move to a new area and somebody asks you directions and you dont have a clue,then a few months later somebody esle asks and you know where it is lol