BMW CAS programming of used key

[AVDIMON]

I am trying to buy my self a tool which can program BMW EWS/CAS with used keys and remote. I've search on the forom, but can't find good post. At this point I have two BMW, 2001 325 and 2006 320i.

EWS Editor Lite v3.2.0 is a good tool for these cars? or AK90 BMW Key programmer, or HiTag2 v3.1? Can I program remote as well?

Please share your experince with BMW tools, thank you!!!!!!!!!!

[immomaniac]

EWS Editor Lite v3.2.0 is a good tool for these cars? or AK90 BMW Key programmer, or HiTag2 v3.1? Can I program remote as well?




None of them will work for CAS system. i dont know which other tools can do. HOpe other members will help you out.

[snatchme]

EWS Editor is just for BMW with EWS not for BMW with CAS.
Tango Key Programer can re-use CAS keys, But only the one that have PCF7943 or PCF7945 inside other keys are not re-useable.
Tango does start and remote function.

Greetz
Snatchme

[ray-ray]

Ak90 will do ews2,3in-circuit and ews4 by soldiering 6 wire onto the pcb board.

ak300 will program cas1,2 key style or proxy and will over write a lock key. I tested it on cas 1&2 have not tested 3 yet.
obd2 system did not work on cas1 or 2 but remove the cas and plug in to the cas socket work perfect.

[AVDIMON]

Ak90 will do ews2,3in-circuit and ews4 by soldiering 6 wire onto the pcb board.

ak300 will program cas1,2 key style or proxy and will over write a lock key. I tested it on cas 1&2 have not tested 3 yet.
obd2 system did not work on cas1 or 2 but remove the cas and plug in to the cas socket work perfect.

AK300 will also do EWS? Or I need to get AK90 for that?