PDA

View Full Version : Opel Astra H 1.3CDTI 90Hp HW03F 32709A143 2006 read by FGTECH



Novik_UA
22nd August, 2013, 07:58 PM
Hi.
Today read Opel Astra H 1.3CDTI 90Hp with FGTECH Can mode.
WinOls did't find marelli checksumm, maybe is bad read ( but really looks OK for me but ...)
Please check ori file, is readed good, and is safe to make mod on it and write with FGTECH with checksumm on writing.
Thanks

http://s019.radikal.ru/i632/1308/0a/aa7ff1175e42t.jpg (http://radikal.ru/fp/1902d997677a4e189dd89efc0d06ea3a)

kevfield
22nd August, 2013, 08:34 PM
Your file is 100% not sure about writing back with fgtech but read is good .....

Thanks kev

Novik_UA
22nd August, 2013, 08:56 PM
Is the read original ? Can't find ori file for compare.

2xded
23rd August, 2013, 06:01 AM
You may need to read in the boot-mode or BDM?

Novik_UA
24th August, 2013, 01:03 PM
Done with BDM100.
What idiot put ECU in such idiot place :stupid:

Anatomik
26th August, 2013, 10:10 PM
what you whant to do with file tune fapoff?

Novik_UA
27th August, 2013, 06:15 AM
Just tuned, car was without DPF.
I post ori MPC read with BDM just for OBD write trouble case.

Anatomik
27th August, 2013, 09:08 AM
bdm automatically find that your ecu is mjd marelli, or you select manually?
Because file looks like mjd, but no checksum.

Novik_UA
27th August, 2013, 09:24 AM
Yes, BDM find automatic family. And correct checksumm only in flash, but not eeprom or MPC.
Looks like MPC don't need checksumm.
Here log from connection with marelli.
Ver. 3.1.0.1255 Dongle ID: 192 Date: 24/08/2013 11:00:57
Firmware Revision V.01 SN: 0258
Mpc5xx family x00020020
PartNum: Mpc563/4 x00000036
EPEE Status: 0
EPEE Status: 1
Flash EEprom identified: M58BW016xB
Family identified: MARELLI Fiat/Opel 1.3 MJ+
+12Vcc On
Ready...

serguei
27th August, 2013, 06:44 PM
Galletto reads and writes with no problems through the OBD.216235216236

Novik_UA
27th August, 2013, 06:50 PM
I ask about write with FGTECH OBD in #1 post, but nobody confirm it safe, and with BDM it safe 100% .

pablo1971
27th August, 2013, 11:20 PM
this ecu i have done with v50 china clkone---worked 100%

2xded
28th August, 2013, 07:08 AM
Galletto reads and writes with no problems through the OBD.

I do not see anything on your screen shots. Share them with good resolution.

Anatomik
29th August, 2013, 06:23 AM
Your tuned file

Novik_UA
29th August, 2013, 09:06 AM
Thanks for help, but car already tuned with BDM100 read-write. Posted ori just in case if someone get error on writing to restore full memory.