Pin from EDC 15 ECU Peugeot 307

[bsv2001]

Hello
Can somebody help calculate pin from peugeot 307 ECU sp08
BSI is damaged
Thanks

[arvedo]

bsi pin, only in this ecu immo off:joyous:

[Zmann]

your pin UERD

[bsv2001]

ECU dont accept pin
May be other pin?

[qwertyuiop12]

PIN UERD 100% correct

[bsv2001]

Today I recovery BSI and can read 912dg128
Pls pin from this dump to compare because ecu dont accept UERD
Thanks

[Zmann]

ECU dont accept pin
May be other pin?
what do you mean 'ECU dont accept pin'. the pin i gave has been there in the ECU. if the ecu not damaged nothing to do with it. you did correctly reading it out for pin for to programming bsi. damaged bsi would need a new unit if used, virginise it and and use that pin by pp2000.

edit: wasn't seeing your upper post. look like your bsi dump is damaged so virginise it and try with the pin

[bsv2001]

I made this a lot of time
Virginesed used BSI Changed VIN /Configuration and after reprogramm key with pin code
In old BSI was water and it damaged now
When I try to program key with PP200 -I have fault with key programming
all wires (power ground can) is in good condition
I am afraid that in ECU sp08 dump is not correct

[damih]

Hello, your PIN from ecu is UERD 100% correct and your dump for BSI is corrupted

[bsv2001]

Silved
Dump in ecu is also bad Change dump from other sp08 and new pin + new PCF7936 and car start

[Zmann]

But now you can't use the remote? You need to program the whole set with the old PIN and use old PCF7936 to keep remote working!

[bsv2001]

remote reprogram without problem