Carprog 4.74 without dongle + lib file - NO PASSWORD

[paul_12345]

I didn't receive a password yet from the other thread but found the no password zip so I've uploaded to a multi host website.

Multiupload.nl - upload your files to multiple file hosting sites! (http://www.multiupload.nl/RSXLQ401PB)

NO PASSWORD NEEDED

[blackpirate]

excuse me for stupid question it will work with china hardware without needed to reprogram it????

[paul_12345]

excuse me for stupid question it will work with china hardware without needed to reprogram it????

I've got carprog on order so I've not tried yet, this is the version raimi.s posted.

Can't remeber the user (seller) now but there was a post not long ago stating they had removed the dongle from 4.74 and flashed back to 4.01 firmware, so I'm guessing its working

[branco]

just tested
working
regards

[blackpirate]

just tested
working
regards


more active option????
renault abs?

u tested on china 4.01 hardware?without reprogramming??? there is counter????

[autodigitec]

more active option????
renault abs?

u tested on china 4.01 hardware?without reprogramming??? there is counter????


Interested in this aswell :)

[branco]

tested on 4.74 hardawre
dash alfa romeo all N/A except 147 vdo and there is a counter
regards

[Lexas]

So, if i have carprog 4.01, i need flash it with other serial number to make it work with 4.74 + lib, cause now pop ups window that lib not found?

[carradio2001]

So, if i have carprog 4.01, i need flash it with other serial number to make it work with 4.74 + lib, cause now pop ups window that lib not found?

I don't think so .... AND AT88SC25616C content ? no matter ?

Carradio2001.
PS> I also tested on 4.74 hardware and works even with the latest software 5.79, of course all activation from 4.74

[xtech]

tested on 4,01 hardawre ,not working old serial number and activation

[Lexas]

I still think that need flash carprog 4.01 with other dump, i found inside dump at91sam7s256 -sn-m61.bin, think its with different sn that mach lib file. when i get counter on my 4.01 ill try to flash with this dump, dont want touch it now while it still works :D

[ruffles1986]

can anyone share how to connect the jtag to carprog according to these images? Cable colors to Pin number
Thanks for help215906215907

[Apolo29]

Sorry for the off but, with this it is supposed to change Carprog 4.01 to 4.74?

If you buy 4.74 from china, are all 4.74 options activated and working or only 4.01 functions?

[foxtec800]

all 4.74 options available but most need a1+ lead,, vag etc
if you have old 4.01, you will need to sort out the serial number to match lib file
also counter is still working in 4.74, after uses you need to reflash to get it alive again

[mcgustoo]

50 tokens!

[Alex_G]

yes

yes all 4.74 active and should work (just functions that use CP online sver don't work)

[mcgustoo]

Hey guys do you tryed vag ecu on carprog? for me not working and gives me info: No Devices Atached! or Voltage error

[Apolo29]

all 4.74 options available but most need a1+ lead,, vag etc
if you have old 4.01, you will need to sort out the serial number to match lib file
also counter is still working in 4.74, after uses you need to reflash to get it alive again

I heard 4.74 was just a 4.01, if 4.74 functions work it?s very good as second tool.

Is it hard to reflash it?

[mcgustoo]

I heard 4.74 was just a 4.01, if 4.74 functions work it?s very good as second tool.

Is it hard to reflash it?

Its easy to reflash! On dk is procedure with reflash like as 4.01!

[carradio2001]

Weird hardware 4.74 ! :stupido3:
After one use, follow counter 47, follow counter 2 and that :guns:
Only 3 uses !!!
New re-flash, everything works fine, but until when?
Can anybody to repair this s**t counter ?

Carradio2001.

[foxtec800]

i think in trying to disable the counter the chinese have Proper F****d the counter
and its all over the place..i used mine about 15 times before the counter started
and then after about 5 uses it locked out, reflashed... same story

[bandjel]

for ruffles1986
connection depends of type of interface. You can explore next thread http://www.digital-kaos.co.uk/forums/f171/carprog-mcu-reflash-step-step-288814/
Best regard

[ovi_dk]

I made today update from 4.1 to 4,7 and after reflash AT91SAM7s256 loat of options are enable,will se if work:P:)
few pictures;)

[ovi_dk]

After 10 times of uses came the f.... counter!The dump not so good becouse the function of edc dosent work,the program shuting down when u choise edc 15 vw,or edc 16,i try on table to read but no succes,on transponder selection the sw not find antena,on immo selection work antena and find the chip but no good read,10 timse if u reed 10 timse sumting ealse give u the program,on eeprom selection i try to reed 93c56 eep but chip not find was the error,so i decide to put bak the old version of cp.Maybe if will find better dump i will make the update again but with this one not realy work ok the main.
Regards

[yanis974re]

hi, I comfirme that Carprog 4.74 edc16 the transponder function and does not work!! the software and activate but to clone the transponder antenna he tells you not to connect and edc16 it cuts the usb connection

[eprommazza]

After 10 times of uses came the f.... counter!The dump not so good becouse the function of edc dosent work,the program shuting down when u choise edc 15 vw,or edc 16,i try on table to read but no succes,on transponder selection the sw not find antena,on immo selection work antena and find the chip but no good read,10 timse if u reed 10 timse sumting ealse give u the program,on eeprom selection i try to reed 93c56 eep but chip not find was the error,so i decide to put bak the old version of cp.Maybe if will find better dump i will make the update again but with this one not realy work ok the main.
Regards


maybe the counter after 10 time because need another AT88SC

[wahye]

thta version not working with carprog v4 , when we select any option or trying to use any option we found that message error : labrary not found !!!!
Best Regards
wahye

[ovi_dk]

maybe the counter after 10 time because need another AT88SC
The carpog 4.7 from China aslo after 10 times get counter in,thats wi they sale with j-tag programmer:))
Regards

[carmansk]

................

[carmansk]

After 10 times of uses came the f.... counter!The dump not so good becouse the function of edc dosent work,the program shuting down when u choise edc 15 vw,or edc 16,i try on table to read but no succes,on transponder selection the sw not find antena,on immo selection work antena and find the chip but no good read,10 timse if u reed 10 timse sumting ealse give u the program,on eeprom selection i try to reed 93c56 eep but chip not find was the error,so i decide to put bak the old version of cp.Maybe if will find better dump i will make the update again but with this one not realy work ok the main.
Regards



yes you are absolutely right.
Version 4.74 is the shit!!
Do not waste time programming.

wish you all the best of luck .

:eviltongue:

[vladtimmy]

worck fine but vag edc 15+16 not worck ??? way??

[dfi]

Anyone here that has v4.74 and can provide the log file for renault megane III ?

[keygargoil]

i have a v4.01 that works for renault but not megane 2 it wont connect can i reflash or use another software version to get it working i only bought it for the adapters but it reads opel ecu pin codes for fun on k line can its not good but its a clone

[ruffles1986]

i have carprog 4.01 clone and i can read ecus of Opel CAN (some ecus need read on bench direct with A1 Adapter). The problem is A1 Adapter, resistor and capacitor swaped and power to pin 16. And change 74hc125D for 74hc125M or double 74hc124D. check it and report!