PDA

View Full Version : galletto 3 v53 install probelms



dave11674
28th August, 2013, 04:28 PM
hi guys

trying to install this tool

not playing ball
i bought it from here
New Version V53 FGTECH Galletto 3-Master EOBD2(A QUALITY) with BDM Adapters (http://www.buyobd2tool.com/product.cgi?group=103&product=104)

it came with a ghost disc with aan image of xp on it
installed that to a spare partition i have on my laptop
but still wont graft :S

has any1 managed to get it grafting ?

thanks

dave

thebigf2
28th August, 2013, 06:03 PM
HI,

install is Tricky, and to run BDM Mode same.

ATTENTION the Chinese People has installed little Friends inside the Windows Image!! Don?t use Internet :joyous:

kevfield
28th August, 2013, 06:22 PM
Hi dave did you use the fix usb first ?? what error codes u getting or are you getting nowt ???/

Thanks kev

thebigf2
28th August, 2013, 06:37 PM
You must set Date 1.1.2013 and then make USB Fix

atomiczen
29th August, 2013, 09:43 PM
who are working with galletto 3 v53 with success? i know there's only problems....

thebigf2
30th August, 2013, 11:43 AM
I have a V53, but from a different Chinese and it works fine..
Although I had to solve many problems, installation, switch BDM / OBD / TriCore etc.
Wiring the heads etc. However, I had to kill many Trojans on the Windows installation. :dog:


Is for read only for experiments and rapid advance OBD.
Without reasonable backup mine is always too hot, but flash goes;)


I have other original tools .. KTAG, BDM100 V3 ,CMD OBD + BDM
is defective since the CMD USB port I needed something to read OBD ..
The idiot of CMD want over 400 euro for a repair + shipping to Switzerland
then there's the problem with the customs it.
F *** in arrogant CMD people, the Service is soo BAD !

serdarmsc
31st August, 2013, 01:06 PM
How to install software and driver for FGTECH Galletto 2-Master EOBD2 V53 - Video Dailymotion (http://www.dailymotion.com/video/x12sf8d_how-to-install-software-and-driver-for-fgtech-galletto-2-master-eobd2-v53_auto?start=198)

euroscan1
1st September, 2013, 02:27 PM
- look at this
--
FGTech Galletto 2-Master - PDF Manuals for Auto-Tool-Shop.com (http://pdf.auto-tool-shop.net/fgtech-galletto-2-master)
--

serdarmsc
2nd September, 2013, 06:33 AM
http://car-prog.com/g3/2_G3_v2012setup.exe i haven't v53 and dongle yet. i cant test.

megasosio
2nd September, 2013, 03:53 PM
WFG!!! I try soft for car-prog in my china clone, and now not work!! only ask for renewal and eobd2.exe error.....
ATENTION NO TRY WHIT CHINESE CLONE!!

morgano
2nd September, 2013, 06:56 PM
WFG!!! I try soft for car-prog in my china clone, and now not work!! only ask for renewal and eobd2.exe error.....
ATENTION NO TRY WHIT CHINESE CLONE!!

So,what did you expect? It worked? Lol

Use fg fix tool and your china clone will work again with china sw.

megasosio
2nd September, 2013, 08:02 PM
Fg fix tool not work. Please If you have one fix, send me i agree you a lot.

Thanks for all

Tecno
3rd September, 2013, 05:27 PM
Can anyone check on his Galletto v53 if it supports the following ?

"09/12 OBD driver for Simos 10.xx VAG 1.2 TSI Read/Write, Checksum" It was added in September 2012... I don't know what's the release date for v53...

If anyone could check inside the software I would apreciate it.

Thanks!

cp2010
3rd September, 2013, 11:00 PM
Can anyone check on his Galletto v53 if it supports the following ?

"09/12 OBD driver for Simos 10.xx VAG 1.2 TSI Read/Write, Checksum" It was added in September 2012... I don't know what's the release date for v53...

If anyone could check inside the software I would apreciate it.

Thanks!


ecu on list cars in obd mode and in tricore boot mode
but i not tested this

Tecno
3rd September, 2013, 11:36 PM
ecu on list cars in obd mode and in tricore boot mode
but i not tested this

Is this in v53 software? I cant see the pictures right... :( I'm seeing thru my mobile phone browser...

Does it says "only virtual read"? Write only in boot mode? Or can it write by obd?

Thanks for the help!

Tecno
4th September, 2013, 01:42 PM
Also, why is there a "1pc x OBD2 Convert Connector " for galletto v53? What's it used for? The standard obd2 cable has pins changed or wired badly?

megasosio
4th September, 2013, 06:46 PM
Can be My galletto v53 broke mcu bu use of eu Clone software? Because i try fgtech usb fix and rewrite ftdi and always dame error. Need to Lake renewal and eobd2.exe crash......

ohkarol
4th September, 2013, 07:49 PM
Does Gallettto v53 hardware works with OLDER software version (v50,v51) ??

serdarmsc
4th September, 2013, 08:23 PM
if you have crash problem, try attached files.


For the fgtech v53 software compatibility is not very good, so there come many problems when install the software.If you have the software problem, please download the FG FIX V53 (http://www.mediafire.com/?sbn0bxcrp6z5mhk) file attached.
And do as follows,
Unzip the attached file to find this fgt2xx
Put it Into the fgtech software together
Open eobd2.exe, continue to follow the steps to install the original software
Note please uninstall the antivirus software in the computer for install fgtech.






2.What you need to pay attention when you install?


1.Your computer need to change the time to 2013.1.1 firstly.
2.Computer configuration:Intel processors Core = 2000Hz,RAM = 2GB.
3.The computer can not have any of the software fgtech before.
4.Can not install anti-virus software.

Most importantly,ensure that the hard drive of your PC is NTFS format, it can not used by FAT32 format.If it is FAT32,pls format disk to NTFS.
3.The solutions you may concern when you meet v53 software installation problems.
Solution1 : install xp. and install netframwork 1 and 2. and install java. and usb fix v53 solution and work ok.
Solution 2: install windows (lite), replace XP PRO SP3 by another XPlite SP3 and works great.



http://pan.baidu.com/share/link?uk=4113236401&shareid=414704#dir/path=%2FFGTech-v53

http://pan.baidu.com/share/link?uk=4113236401&shareid=396896#dir/path=%2FD630-FGtech%20v-53

mysamed
11th September, 2013, 02:17 PM
Hi fgtech v53 chinea run all language SP3 XP new setup

contect me ...

serdarmsc
12th September, 2013, 07:07 AM
........................

ferbenja
20th October, 2013, 03:33 AM
I greet I arrive me galleto2 master v 53. With damaged DvD
I made discharge of the soft. from ECUTOOL. But when beginning the installation
does he/she appear me this and does it differ with the images of the video tutorial that it can be?
where this the error, thank you.

ferbenja.



225570

bambula tuner
21st October, 2013, 09:02 AM
Hello Guys

I have a problem.

I can Run the FG Tech Software now, i have install this image


225679


I change the Date of Computer in Bios befor install the XP.

Then i Install the FG Tech Software and i can start (o:

But when i choosing a BDM or JTAG Driver the Software chrash, When i choose a OBD Driver all work fine.
watch here i made a video.

https://plus.google.com/u/0/102762678198082213333/posts/Uae7a5y2qgb

(https://plus.google.com/u/0/102762678198082213333/posts/Uae7a5y2qgb)

anybody has the same Problem or anybody knows a solution?



grretings to all DK Members