help please

[flerten]

Hi, Im struggling to find the latest firmware for a Starview 4 USB. Any help appreciated :)

[young]

it is all in the download section pal everything is there for you

[flerten]

Ok, I have stopped being quite so thick but even after flashing 1.7 I cant find and channels on the box.

I have seen that some box's require codes to be changed.

If I need to do this, where do I find them.

Thank you :)

[bigfella]

Ok, I have stopped being quite so thick but even after flashing 1.7 I cant find and channels on the box.

I have seen that some box's require codes to be changed.

If I need to do this, where do I find them.

Thank you :)

m8 can u get any channels ?? can u get the freeview channels??if u can get the freeview channels u need to turn the keycode on by pressin 1 5 7 0 on ur remote to open secret cas menu then turn keycode on and press default and exit bac to sly sports and let update ...if no channels at all go to menu gotosystem setup goto system information and check to see if u have flashed 1.07 correctly it shud say 1.07//if not reflash

[flerten]

Hi
Thanks for the reply.
I did the flash and it says its worked. Dec 2008, 1.07.
Then I did 1570 and changed the option there.
Exit and Scan on the nt1 option and nothing appears ?

[camelv]

Hi
Thanks for the reply.
I did the flash and it says its worked. Dec 2008, 1.07.
Then I did 1570 and changed the option there.
Exit and Scan on the nt1 option and nothing appears ?

make sure you factory default the box before you scan it then do the set default and keycode on then leave on sly sports 1 to update

[boomer39]

Hi
Thanks for the reply.
I did the flash and it says its worked. Dec 2008, 1.07.
Then I did 1570 and changed the option there.
Exit and Scan on the nt1 option and nothing appears ?

i cant get any channels with ntl,have to use t/pest or xcountryand western. try them...ynwa

[flerten]

Cheers People
All working superbly now.
Just scanned under the different name and hey presto :D
Thanks Alot

[Aidob5]

Hi - can someone help me? My starview 4 (Super USB) is completely scrambled, are there new codes available ?

[boomer39]

Hi - can someone help me? My starview 4 (Super USB) is completely scrambled, are there new codes available ?
again, have you got latest firmware on your box?

[cactikid]

and i hope u dont live in irl.

[Aidob5]

again, have you got latest firmware on your box?

Just checked - I'm beta vesion1/.06 - I'll download the latest version and see if that helps:top:

[boomer39]

that would help greatly matey, ynwa

[Aidob5]

Still the same lads, nothin happening. Downloaded V1.09, loaded it on the box, rescanned, nothin.
Is tis the Nagra3 I've heard about ? Is that the end of my box?

[mtv1]

it depends on your location dublin galway waterford ntl are streaming s*y sports and movies on nag 3 dont know about uk you should be getting some channels check is your cable in the right inlet

[boomer39]

Still the same lads, nothin happening. Downloaded V1.09, loaded it on the box, rescanned, nothin.
Is tis the Nagra3 I've heard about ? Is that the end of my box?

if your in ireland, probably yes. but if you are in england 1.07 is the firmware you want..ynwa.

[Aidob5]

Ah well, seems that I'll have to wait until the little Nag3 problem is fixed. Everything is gone now unfortunately.

[flerten]

Hi Guys.

Back again.

Everything was working absoluetly fine and I unpluged the box to take it to my mates.

When I got there and plugged it in, it began rebootinf constantly.

I get all 8's on the display and then the last two numbers change to 20 and then it reboots !

Any ideas ?

[boomer39]

was your usb stick still in when you unplugged it?? not certain but this may be the probem, you might have bricked it.ynwa

[flerten]

Hi
Definately removed stick first.
Its the 8882 message described elsewhere so Im gonna try and have it replaced or buy the kit from custom circuits to fix it.
Thanks :)