Mazda 626 Pin code

[hamzadaw2000]

Hello.

i need your help to program mazda code, immobilizer photo attached, i will use T5 chip, please tell me about procedure of programming keyword.



Serial number of imm: 6937338522 216926

[siyadk]

u need to read MCU MC68HC05B6

then need to program a transponder( t5 or pcf7930) via tango or tmpro


Start hit "Thanks" button to get help more!!!

[qwertyuiop12]

What year car ? Maybe ID 8C ?

[hamzadaw2000]

Made year 1998

[keysph]

You will need two ID12 chip to do this


One or no key programmed in the system

1) Insert the first key to be programmed (key 1) and turn on and off repeatedly 5 times.
2) Turn on again with key 1. The anti-theft warning light will begin to flash.
3) Turn off and wait 5 minutes.
4) When the warning light flashes more slowly, enter the password.
5) Turn on with key 1 within 15 seconds of illumination of the anti-theft warning light.
6) Start the engine with key 1. After approx. 2 seconds the warning light will go out (registration of key 1 over).
7) Turn off the engine and remove the key.
8) Within 15 seconds insert the second key to be programmed (key 2).
9) Turn on the engine with key 2. The warning light will illuminate and after approx. 2 seconds go out (registration of key 2 over).
10) Repeat 7), 8), 9) for all other keys.
11) Remove the last key inserted and wait 20 seconds (programming over).

[mj80s]

65233663 this is your code!!!
Just make sure you know how to make correct key cycles to input this code.. this takes a little learning.... but very easy once you get the hang of it...