Smart SAM modul after 2010 MCU EXTAL connections

[Fec001]

Can't find white extal cable point. Board is different from other 148 boards
MCU 9S12DT256 mask 0L01Y
connections:

YELLOW = RESET

PURPLE = BKGD/BDM

BLACK = VSS/-

RED = VDD/+

GREEN = PE7/XCLKS

[wsc]

you have also wrong VDD

[Fec001]

Thanks, is it safe to read iw with RED cas programmer?

[wsc]

yes , i think you will not have any prob

[Fec001]

Read with Red CAS3 programmer. Can somebody reset the dump for me please?

[wsc]

wrong dump m8
read it again......

[Fec001]

yes, I only can read with RED R260 If is choose for example BMW CAS3 secured (0L01Y) from the list. But when I go to eeprom editor and choose MC9S12Dx256 and click read, I get : "Problem while communiating the proessor!
Microprocessor is still secured"

[wsc]

i have not CAS3 mate sorry, i never use it ...

[Fec001]

I think dump now is ok. Found VIN etc...... (looks good)

[wsc]

here you are

[Fec001]

Thank you! I will reply

[Fec001]

Works perfect, thank you again!!!

[RAPIDMELLY]

HELLO, I HAVE A PROBLEM WITH SMART AND I NEED EPROMM VIRGIN OR RESET , THE MASK IS 0L01Y, I CONNECT THE ZEDFULL FOR GENERATE NEW KEY AND SMART DEAD xD

[figani]

try this one...
I don´t have test it...
get it from one member here on DK...
if it work, write a feedback here...

btw, where did you have been the last three years...?