Carprog repair please help!!!

[bersch8688]

Hi,

i have this cable and i need help for solder on carprog 4.74

ARM JTAG parallel Programmer Kabel (Wiggler-Kompatibel); P009.06 | eBay (http://www.ebay.de/itm/151109126759?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649)

Thank you

[bahtiyar]

hi need carprog
http://www.digital-kaos.co.uk/forums/f174/carprog-4-74-without-dongle-lib-file-no-password-363587/

[JMTec]

Hi,

i have this cable and i need help for solder on carprog 4.74

ARM JTAG parallel Programmer Kabel (Wiggler-Kompatibel); P009.06 | eBay (http://www.ebay.de/itm/151109126759?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649)

Thank you

Here Example 3 picture how to making with this cable.

[racin-snake]

here ya go mate its right here if you use search in top of the page don't forget to thank the authors and the contributors to that thread please

they give their help for nothing !!


http://www.digital-kaos.co.uk/forums/f171/carprog-mcu-reflash-step-step-288814/ (http://www.digital-kaos.co.uk/forums/f171/carprog-mcu-reflash-step-step-288814/)

[sepistar]

Hi,

i have this cable and i need help for solder on carprog 4.74

ARM JTAG parallel Programmer Kabel (Wiggler-Kompatibel); P009.06 | eBay (http://www.ebay.de/itm/151109126759?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649)

Thank you

have you succeed to do with this programmer?have the same but i never have success with it.start to write and after cca.2 sec.stopping with an error''something goes wrong''.
br.

[racin-snake]

same programmer in link as i bought works fine although the wiring on mine was inverted but that wouldn't connect to target

try again making sure you clear the flash in mcu

[sepistar]

no matter what i do it give me same error:time out.this mean something goes wrong.it start programing and after exactly 2,20 sec stopped with the error i write above.i try a lot of combination,short cable-long cable,2 different pc(1 laptop,1 desktop)with or without eeprom on board,if connection from the other thread or from here,all make no differences.
br.

[sepistar]

have sorted out!!the programing process was always interrupted due to missing gnd on mcu.after the mcu has gnd then programming was done in 5 sec.
br.