Log in

View Full Version : Technomate 6900HD fine tune usals



batman44
29th April, 2009, 10:41 PM
Early evening I can tune in on MTVDance on 23w astra and a few others, I select the motor settings to fine tune to a good signal but it does not hold after I move off, Its really getting annoying. Late on I cannot pick anything up that i did before, can I save the settings for that transponder? or is it the position of the sat late at night? I dont know what I have done, how can I reset the position just for that sat? any help thanks.

benny/9
29th April, 2009, 11:31 PM
Early evening I can tune in on MTVDance on 23w astra and a few others, I select the motor settings to fine tune to a good signal but it does not hold after I move off, Its really getting annoying. Late on I cannot pick anything up that i did before, can I save the settings for that transponder? or is it the position of the sat late at night? I dont know what I have done, how can I reset the position just for that sat? any help thanks.
************************************************** ********
it's a signal problem mate i have a 1.2 dish and at certain times
from the uk i loose signal on some of the chns and cant get them back
just checked now some chns only have 52% signal others are 70%
and the dutch chns on this sat are 89% so it must be a signal loss
at certain times i find the best time is in the morning and afternoon

.: JaCkPoT :.
30th April, 2009, 12:31 AM
Whether you get signal or not depends truly on the weather and whether there are thick clouds out if any..the clearer the sky the better!

lincsat
30th April, 2009, 01:48 AM
If your motor moves off the satellite slightly when you come off fine tune, you can adjust the exact position of the satellite in the satellite/motor settings, try adding or subtracting 0.1 of a degree :)

batman44
30th April, 2009, 08:31 AM
Thanks all chaps, will monitor this.