SORENTO 2011 SMARTRA

[ivanrpm]

Hi bros I have a SORENTO 2011(2.4L USA) without keys, by the vin number I got the pin code but when I try to program it say the pin is not correct so, in the SMARTRA UNIT there is something I can read to take out the correct pin code because all pins appears to be incorrect?


Many thanks

[achaccha]

Dear Friend.
You need the new pin code to program this vehicle. please post a picture of the engine ecu, it is very possible that the immo and pin code is stored in the engine ECU.
regards

[ivanrpm]

here is the ecu!

[ivanrpm]

Hi, there is way to read ecu continental (siemens) FLASH by OBD2 to get the pin code, must be another pin code because by the vin is wrong, SOMEONE PLEASE CAN CHECK IF IS THE SAME PIN I GOT ???
VIN: 5XYKU4A15BG01521
OLD PIN: 559647
NEW PIN 536976

I think someone change ecm and the pin is another so I open ecm and look a chip I think is the FLASH S29CD016J0MQF11, but I would like to know if there is possible to read by k line???


many thanks
regards

[achaccha]

Dear friend.
It is possible to get images of the printed circuit board of the ecu?
I believe that we can do a reading, I need to see components electronic having this Board.
Best regards

[ivanrpm]

http://img.tapatalk.com/d/13/09/05/u7a8y9us.jpgHere is the ic picture

Enviado desde mi GT-I9500 usando Tapatalk 2

[OalikO]

It is SIM2K-341 with TriCore. EEPROM emulated in processor. You must read it. I try to say PIN-code.
217802

[Carkeysa]

Hi, there is way to read ecu continental (siemens) FLASH by OBD2 to get the pin code, must be another pin code because by the vin is wrong, SOMEONE PLEASE CAN CHECK IF IS THE SAME PIN I GOT ???
VIN: 5XYKU4A15BG01521
OLD PIN: 559647
NEW PIN 536976



I think someone change ecm and the pin is another so I open ecm and look a chip I think is the FLASH S29CD016J0MQF11, but I would like to know if there is possible to read by k line???



many thanks
regards

Missing a digit as only 16 here.

[ivanrpm]

Can I read it with willem?

Enviado desde mi GT-I9500 usando Tapatalk 2

[achaccha]

That's right friend, here to do a reading at MPC, you have Xprog? or bdm100? please tell me what tools you have to do this reading?.
regards

[ivanrpm]

X prog can, I got it, I never read something like that, but there is something else today I read vin number of ecu and is the same so the pin must be the same, I need to be sure if this is really the pin code?

Someone can check it please?
Vin 5XYKU4A15BG015621

Regards

Enviado desde mi GT-I9500 usando Tapatalk 2

[achaccha]

Please post the file read.
regards

[ivanrpm]

http://img.tapatalk.com/d/13/09/05/enusyme6.jpgIn the xprog menu what I must to select to read this?
This the chip bro?

REGARDS
Enviado desde mi GT-I9500 usando Tapatalk 2

[achaccha]

MCU/MPU - MOTOROLLA MPC - MPC

[OalikO]

No, needed data stored in TriCore. I could be wrong. I am read it with CombiLoader (SMS-software).

[ivanrpm]

Can you check if the pins codes I got are ok by the vin number?

Regards

Enviado desde mi GT-I9500 usando Tapatalk 2

[OalikO]

I'll ask on the forums when necessary. You can try post new thread for it.

[ivanrpm]

Thanks bro I will do that.

REGSRDS

Enviado desde mi GT-I9500 usando Tapatalk 2

[Zohar]

No need to read Tricore MCU. Because, this is PCM and MCU Tricore only is part of automatic transmission management. Just read Mororolla MPC561 with external flash 29CS0016 and ext EEPROM 95*** via BDM mode. Good luck.

[achaccha]

Exactly that is the winning answer. this way you have to do this reading friend. you can do this via BDM Xprog reading. ZOHAR friend, please can post the connection for reading with Xprog?
thanks for help
regards

[ivanrpm]

Bros someone with pin by vin.???

Regards

Enviado desde mi GT-I9500 usando Tapatalk 2

[ivanrpm]

Hi brothers, I need the Bdm for this ecu with XPROG.

MANY THANKS BROS

Enviado desde mi GT-I9500 usando Tapatalk 2

[OalikO]

It is Siemens standard BDM. Painted just for you.
218953
Now you must read it)))

[ivanrpm]

Many thanks bro I will read it and report it!

REGARDS

Enviado desde mi GT-I9500 usando Tapatalk 2

[almlohe]

What is the solution for xprog m