2011 Honda CRV 77960-SWA-L210-M4 eeprom 25640

[Plcautoparts]

Could someone please clear this one for me thanks in advance, tested file please.

[Plcautoparts]

Hello guys, anyone has done this module before?
Could someone please help me!

[badenaleks]

I clear for you
Pass in PM

[Plcautoparts]

i will try and post result, thank you very much

[Plcautoparts]

Hello Badenaleks, I installes the module and I got the following codes:

81-71 Occupant Detection System (ODS) Unit Does not calibrate.
44-30 Internal Failure of the right Side Impact Sensor (First)

I calibrated the ODS and SWS, I'm not getting codes 81-71 anymore, but I still have code 44-30.
I exchange sensor, left side sensor put it on the right side and right sensor on the left side, and got both codes for left and right no signal.
So I know for sure it is not the sensor. It is something inside the module not program right!
So please help.

[Plcautoparts]

Hello Badenaleks, I installed the module and I got the following codes:

81-71 Occupant Detection System (ODS) Unit Does not calibrate.
44-30 Internal Failure of the right Side Impact Sensor (First)

I calibrated the ODS and SWS, I'm not getting codes 81-71 anymore, but I still have code 44-30.
I exchange sensor, left side sensor put it on the right side and right sensor on the left side, and got both codes for left and right no signal.
So I know for sure it is not the sensor. It is something inside the module not program right!
So please help.

[badenaleks]

Check the wires to the sensor!I'm not sure that they are interchangeable

[Plcautoparts]

they are interchangeble, same part number,
car was wrecked on the driver side.

[cesarjaramillo]

FIEL CLEARED, GOOD LUCK!!!!!!!!

[Plcautoparts]

The problem was the righ second impact sensor, problem solved, thanks guys.

Sent from my SGH-T889 using Tapatalk now Free ('http://tapatalk.com/m?id=10')

[samyboy]

hi
I have same module , can somebody clear CRASH for me please
2011 Honda CRV
77960 SWA L210
EPROM 25640

[Vienasisju]

her cleared

[anastudio1]

SRS MODULE RESET FIX internalfailure IN SEDALIA

Hello Badenaleks, I installed the module and I got the following codes:

81-71 Occupant Detection System (ODS) Unit Does not calibrate.
44-30 Internal Failure of the right Side Impact Sensor (First)

I calibrated the ODS and SWS, I'm not getting codes 81-71 anymore, but I still have code 44-30.
I exchange sensor, left side sensor put it on the right side and right sensor on the left side, and got both codes for left and right no signal.
So I know for sure it is not the sensor. It is something inside the module not program right!
So please help.