Log in

View Full Version : Lexus IS200 year 2000 Remote programming help



super jumbe
7th September, 2013, 02:19 PM
Lexus IS200 year 2000
2.00 LT 200


Got a new remote from china and gwee added key dump and I programme to ecu car starts, how can I get remote to work? I have tried programming with MVP but no joy, any idea please any one help.
Thanks in advance.

gwee
7th September, 2013, 03:38 PM
Hey m8,

Normally chinese remote not working, for many reasons.

Try to get a used remote for the same car from scrap yard :)

Try manual procedure:

Maybe this will help
Program remote on ES300 partial video.AVI - YouTube (http://www.youtube.com/watch?v=qtSqzcdYGig)

reapro
7th September, 2013, 04:35 PM
try this;;; driver's door open .all other doors closed.key removed from ignition switch. insert key into ignition switch ,then remove it press LOCK and UNLOCK on the vehicle door loch control switch at 1 second interval 5times .close and re-open the drivers door.press LOCK and UNLOCK on the vehicle door loch control switch at 1 second interval 5 times.insert key into ignition switch.switch ignition ON and OFF once to program a remote transmitter code whilst retaining the original codes or twice to program a remote transmitter code wilts erasing the original codes three times to check how many remote transmitters are currently registered,five times to erase all registered codes . remove key from ignition switch....system should now loch and unlock vehicle once .twice or five times depending which mod has been selected.one to four times .slowly,to indicate number of remote transmitters registered. press any remote transmitter button for a minimum of 1second;system should now lock and unlock vehicle once to confirm,,,,..twice to indicate registration has failed if required repeat button procedure to program remaining remote transmitters....TO exit programing mode ;close drivers door or insert key into ignition switch ,,,a maximum of four remote transmitters can be programed.

super jumbe
7th September, 2013, 05:26 PM
Thanks mate I will let you know the result tomorrow

rashid01
7th September, 2013, 07:46 PM
Free Keyless Remote Fob Entry programming instructions, procedures for all automotive vehicles (http://www.programyourremote.com/) may help u