PDA

View Full Version : vauxhall edc17 767 tricore



hackerabcd
7th September, 2013, 08:30 PM
hi

i am having trouble reading an edc17 767 tricore ecu . galletto with connect and identify the ecu but will not read it giving
an error message of ecu protected try tprot driver . when i try this i get an error of com1 . is there anyway around this issue . i am trying to read in boot mode ie ecu removed from the car


Infineon Tricore TC1767
CPU-ID=0000900100001820
Internal Flash ID = 0053C001
Internal Flash 2048Kb Protected
OTP Protect: 0x14000 -- 0x17FFF
EEprom 64Kb Protected

this error comes up

READING ECU
Start reading...ERROR UNLOCK READ - TRY TOOL TRICORE PASSWORD TPROT V08

try TPROT and this error comes up

DATA READING
Start data reading...ERROR COM1


regards
peter

jolidj
8th September, 2013, 11:46 AM
may be you have problem of your galletto , linea k ore can.

javyb
8th September, 2013, 12:28 PM
What year is the vehicle? If its 2012 then it won't read as that processor is not covered by galletto yey

flixuno
8th September, 2013, 07:31 PM
218360
hi!
communication protocol is can and must be correct boot mode
and this diagram
luck.

hackerabcd
8th September, 2013, 08:19 PM
its a 2013 astra 1.3cdti . what tool will read / write this ecu . i have seen one called KTAG by alientech

regards
peter

gttuning
8th September, 2013, 09:25 PM
galletto ver.3
nfineon Tricore Sak TC1767 new**