PDA

View Full Version : VW Golf IV 1.4 16V



Topman000
10th September, 2013, 03:40 PM
I need to increase idling up to around 900rpm ,
because at the moment while starting the car has poor and unregular idling.
Can anybody help me with this ?

ECU MM 036 906 014 AA
AM29f200

bondiblu
10th September, 2013, 03:48 PM
Have you tried a throttle body alignment? Surely the underlying issue needs resolving rather than trying to mask it with idle speed increase.

Topman000
10th September, 2013, 05:49 PM
I tried everything.I changed throttle body alignment.MAP , throttle , ok.

veloseeped
10th September, 2013, 09:14 PM
Check EGR path and valve.

Topman000
11th September, 2013, 08:30 AM
EGR blinded and it is doing also.but only when i put a strain on engine.for example lights

bobolin4o
11th September, 2013, 11:02 AM
How many is exact rpm at idle?
Is there any temperature relation between coolant temp and the idle rpm, and what exactly is?
In short - i need numbers...
P.S.
Have you try to increase the idle rpm with VCDS?
Regards!

Topman000
12th September, 2013, 09:16 AM
cool engine - car has 900rpm
hot engine - car has around 750-800rpm
If unregular idling - it is between 650-800rpm and throttle position sensor shows 0-2 degrees.
I have tried it with VCDS and superVAG, but I dont know in which channel is adaptation on idle rph.

bobolin4o
12th September, 2013, 10:17 AM
You must find in VCDS message block "specifed idle" and simulate temp. sensor with potentiometer... then simulate -20 degree and look what is the spec. idle speed. This measurement you should due for different temp. with steps of 10 degrees up to 120 degrees. That i meant by "numbers"...
You must understand, there isn't available damos for this ECU, this will be hard job...
Cheers!

alin 151
15th September, 2013, 04:33 PM
Try increse iddle rpm with "UniSettings Bosch ME7.exe" or "Lemmiwinks.exe" on ch 01
Work with kkl cable.

Regards.

2200
20th September, 2013, 01:02 PM
Try increse iddle rpm with "UniSettings Bosch ME7.exe" or "Lemmiwinks.exe" on ch 01
Work with kkl cable.

Regards.

hello,
where can i get these soft?

alin 151
20th September, 2013, 05:25 PM
Try this!

All you need is inside.

Don`t forget to push THANKS button

alin 151
25th September, 2013, 06:54 AM
You managed to do it?