PDA

View Full Version : alfa 159 problem



vito73
11th September, 2013, 10:02 PM
hello friends
I planned a 159 jtd EDC16C39 with mpps
but the car does not start more number equal to the control unit ECU
with BDM can not read and write tried to put the file read with pps unit but died
I'm going in diagnosis with bosch kts but does not connect with ECU
a friend has a suggestion
thanks
ECU EDC16C39
bosch 0281013138

tadeo
11th September, 2013, 10:09 PM
hello friends
I planned a 159 jtd EDC16C39 with mpps
but the car does not start more number equal to the control unit ECU
with BDM can not read and write tried to put the file read with pps unit but died
I'm going in diagnosis with bosch kts but does not connect with ECU
a friend has a suggestion
thanks
ECU EDC16C39
bosch 0281013138

If I good understand you can bay BDM100
Will do all EDC16 family

vito73
11th September, 2013, 10:12 PM
I can read and write with bdm

vito73
11th September, 2013, 10:15 PM
I tried to replace the original file with bed mpps
directly with BDM
turned up nothing

tadeo
11th September, 2013, 10:21 PM
I can read and write with bdm

Ok
Are you BDM100 reading your Ecu ??
If yes your file is damage ask here for full BDM file and replace with your EPROM file and you should by good to go

vito73
11th September, 2013, 10:27 PM
you read well with bdm
friend and you've got the original backup file for this ECU

kennfeld
11th September, 2013, 10:34 PM
you need to rebuild with the bdm file and the mpps file a new not corrupted file if your bdm is clone and not good working then you f;ck up the ecu for ever

vito73
11th September, 2013, 10:36 PM
you clone bdm
and then what to do
to fix this ECU

tadeo
11th September, 2013, 10:41 PM
you clone bdm
and then what to do
to fix this ECU

Post your file here

ominimicu
11th September, 2013, 11:30 PM
STAY AWAY FROM EDC16C39 WITH MPPS.. also from all nissan renault edc16CPxx...

Mpps read ful l maps and info and only 2 checksums. tehere are 9 checksum blocks...he deleted the 7 remaining.

1.Connect BDM and make a read of FLASH
2. Post here BDM read + Obd first bad read!
3. we ll fix it for u

vito73
12th September, 2013, 07:07 AM
friends here
mpps file
and file backups that no longer starts

tadeo
12th September, 2013, 09:45 AM
friends here
mpps file
and file backups that no longer starts
both files look this same
are you using BDM FRAME ? or
you solder wires directly to ecu pins ??
can you make some pictures of your ecu connection and pins good quality
and the last one wen you start software bdm100 and ecu is connected can you take snapshot and uload is well

ominimicu
12th September, 2013, 04:12 PM
that backup file is 35 kb and there is amod file done with tiantium. NO

I need Original you first read via mpps OBD. and Current read of flash via BMD

gad3n
12th September, 2013, 04:27 PM
i killed alfa 159 with mpps ... revived in 5 minutes with simple galletto 1260

mpps gave error at 100% write

ominimicu
12th September, 2013, 05:45 PM
well lucky you..! :D didnt know galletto 1260 could do that

gad3n
12th September, 2013, 07:33 PM
i didn't know either but had to try :)

vito73
12th September, 2013, 09:49 PM
boys
I'll explain
I while ago I deleted dpf from this car
and all ok
day later I gave him a little inspiration to drive but he smoked too
Now I confused it with another file in the folder and I wrote in ECU
I noticed that for writing it took too long
I went to start car
and gave me ars not available
hill dol not available
code key is not available
Now if I have a friend who can help me sending backup bdm direct connection to the ECU solder
pps file with bed and it was fine until a few days ago
I am attaching the file
thanks

vito73
13th September, 2013, 02:30 PM
help me pleas

gad3n
13th September, 2013, 03:47 PM
can't really understand what you want

tadeo
13th September, 2013, 07:07 PM
boys
I'll explain
I while ago I deleted dpf from this car
and all ok
day later I gave him a little inspiration to drive but he smoked too
Now I confused it with another file in the folder and I wrote in ECU
I noticed that for writing it took too long
I went to start car
and gave me ars not available
hill dol not available
code key is not available
Now if I have a friend who can help me sending backup bdm direct connection to the ECU solder
pps file with bed and it was fine until a few days ago
I am attaching the file
thanks
before you delete DPF did you read ecu by BDM100 or MPPS ??

do you have backup MPPS file before you done dpf delete ??

do you have backup BDM file before you done dpf delete ??

Try This one write true BDM100

vito73
13th September, 2013, 09:46 PM
friend and a mess all happened this week
I read the file with mpps
but I can not find more
here's the rub

tadeo
13th September, 2013, 09:58 PM
friend and a mess all happened this week
I read the file with mpps
but I can not find more
here's the rub

Did you try write my dump ??
And with language you speak ??

mexanico1971
14th September, 2013, 02:42 AM
if is K-line old 1260 can do !

vito73
14th September, 2013, 04:11 PM
friends I found the original file
bed with attach mpps

vito73
14th September, 2013, 04:38 PM
tadeo
not working

tadeo
14th September, 2013, 06:46 PM
tadeo
not working

Are you able to write this file to your Ecu ??

vito73
14th September, 2013, 07:26 PM
friend
but of course I'm able to write the file to the ECU
with bdm export / import calculation cks and all ok
but since you asked me to send you the file golds bed with mpps
I proceeded
then if there is another way
help me
thanks

tadeo
14th September, 2013, 08:15 PM
friend
but of course I'm able to write the file to the ECU
with bdm export / import calculation cks and all ok
but since you asked me to send you the file golds bed with mpps
I proceeded
then if there is another way
help me
thanks

Ok so only problem you have car don't start and Ecu is 100%fine right ?? If yes

Ask here for virgin full BDM for your Ecu and do Immo off and all will be fine

and im find this one you can try

vito73
15th September, 2013, 05:09 PM
ok!!!!!!!!!!!111

vito73
15th September, 2013, 11:22 PM
as I understand it I have to put this file, and then immo off and when it relates to the lights that light up the problem and all the files asr, abs.ecc