Immo OFF for EDC15C2 3 plugs Peugeot 807 0281011522-1037368845

[TeiS]

Hi, i have a problem with a EDC15C2 with 3 Plugs from a Peugeot 807.

The car no have immo memory, all configuration was lost and i need immo off for start the engine.

I tried some solutions (patch the 95P08 and modify with 0xFF a block of the flash) but in the measure blocks appear ECU Status: Locked and not appear data of RPM, Temperature, Boost etc etc... (Tried with PP2000 and other diagnostic tools)

Somebody can help me to immo of this files for try ?

Thanks

[FastFurious]

Hi, i have a problem with a EDC15C2 with 3 Plugs from a Peugeot 807.

The car no have immo memory, all configuration was lost and i need immo off for start the engine.

I tried some solutions (patch the 95P08 and modify with 0xFF a block of the flash) but in the measure blocks appear ECU Status: Locked and not appear data of RPM, Temperature, Boost etc etc... (Tried with PP2000 and other diagnostic tools)

Somebody can help me to immo of this files for try ?

Thanks


try this file and report

pass in PM

[TeiS]

Thanks FastFurius, i had tried with this dump and don't work, i have the same problem.

[arvedo]

read 95p08 post here and I can help

[TeiS]

The ecu had not immo memory, i put a new 5p08 with a dump from other ecu and i have the same problem. I use ecuvonix for patch the dump and have the same problem.

I used all dump from other ecu with the same hardware (flash and eeprom) and i have the same problem

In a moment i upload the dump.

I think that the solution is in the flash.

Thank you!!

Enviado desde mi Galaxy Nexus usando Tapatalk 2

[TeiS]

Hi, I upload the file for the memory 95P08

Thank you