PDA

View Full Version : Disable DTC P2279 on Astra 1.9CDTI



ruffles1986
13th September, 2013, 01:35 PM
Hello i need disable DTC P2279 on Opel Astra H 1.9 CDTi 150cv ecu EDC16C9 0281011667 371868.

Thanks in advance!

eprommazza
13th September, 2013, 04:47 PM
Hello i need disable DTC P2279 on Opel Astra H 1.9 CDTi 150cv ecu EDC16C9 0281011667 371868.

Thanks in advance!

TRY IT PASS PM
REGARDS

ruffles1986
13th September, 2013, 05:02 PM
TRY IT PASS PM
REGARDS
Only need modified two bits to disable DTC? no need checksum correction?

morgano
14th September, 2013, 08:29 AM
I wonder why people doesn't try the files they get from a reliable source (eprommazza for example), but come to throw doubts about it once they get it.

Test the file and if not working then complain, but not before.

Bdm for safety backup and test the file provided i think is not too much effort.

I guess eprommazza haven't updated chksm mostly because one of these reasons. Changed zone not covered by checksum or this ecu gest auto checksummed when write by any tool. Easy as that.




Regards,

ruffles1986
14th September, 2013, 09:48 AM
I wonder why people doesn't try the files they get from a reliable source (eprommazza for example), but come to throw doubts about it once they get it.

Test the file and if not working then complain, but not before.

Bdm for safety backup and test the file provided i think is not too much effort.

I guess eprommazza haven't updated chksm mostly because one of these reasons. Changed zone not covered by checksum or this ecu gest auto checksummed when write by any tool. Easy as that.




Regards,

The car is far to me, and in other ecus is necessary modify more bytes on tables DTC to disbale it, therefore i ask about my doubts.If the ecu were near to me i try without problems and report result. that does not mean that is not grateful for try to help me.

Sarkan
5th February, 2014, 04:58 PM
Same problem on Vectra 1.9 cdti.Egine code DTH.I've tried changing the EGR valve.Note that the pressure in the intake manifold is constantly higher than the nominal.At one point,in the higher engine loads and pressure in the intake manifold encounter this error.Map in engine ECU is original.I tried everything I knew and listened to advice from others.The car was in an authorized Opel service and failed to find the cause of failure.Is it possible to disable in ECU map.

BOSCH 0 281 011 915