206 hdi edc 15 3 plug immo off

[perovuk]

hi to all,need help immo off 206 2.0 hdi 3 plug 2003y.I read a variety of thread om DK about immo off on this ecu but very little feedback what works and what does not work,whether the immo of working on epprom 5p08 or in flash memory.i try several ways whit immodecoding and similar programs but no joy.here it is dump from 5p08.
thanks in advance!

[pelot]

Hi! some versions of PSA edc15 have immo in flash 29f400.
v2 - problem not in immo. Immodec and etc work 95% cars...

[perovuk]

how to know where is immo in this version?

[pelot]

1. try to start without eeprom
2. modify flash

[perovuk]

is it normal that I can not read flas through diagnostic plug when immo is on?

[perovuk]

ecu is 0 281 011 188 it's edc 15c2 so i think you just need to modify epprom

[perovuk]

can someone make a virgin file for ecu please

[kire106ka]

Immo is in the flash.Have you try with diagnostic does ecu respond to diag.And what tool you read the flash

[perovuk]

done diagnostic whit pp2000 and in ecu only actual values you can see is ecu condition(ecu locked and waiting for a response from bsi) all other values like batery voltage,fuel pressure only display ??????,also cant change nothing in the configuration,also cant erase faults pp2000 always gives the message communication error.In BSI all looks good.try to read flash whit galleto but after 2sek gives the message read done.We have the ability to desolid flash and read whit programator but all this situation is a little strange,so my question for peugeot experts whether this is normal behavior of engine ecu when immo is on?

[kire106ka]

You could read flash bought ways immo on or off no metter so read on a programer and post here

[perovuk]

flash dump,plase immo off

[morfej]

Tested solution.

Pass Pm.

[garagetech]

Tested solution.

Pass Pm.

Please can you confirm if this worked for you thanks

[perovuk]

thanks morfej for help but no joy for me,car wont start actual values
control unit condition=ECU locked
status of coded engine immobiliser programing=matched ecu
problems detected when transmitting the unlock code=awaiting response from BSI
all other actual values ????????????

[dell66]

code pin T3P6

Hello virgin edc 15c2 file taken from nine before mounting over the pin code of your dump.
diagbox do with learning as a new computer.

[massi6]

hlo immo off 206 merci

[perovuk]

thanks a lot dell66,your file virgine is ok for this ecu,i start car all looks fine.Cheers!

[dimgar]

code pin T3P6

Hello virgin edc 15c2 file taken from nine before mounting over the pin code of your dump.
diagbox do with learning as a new computer.

pass please

[dimgar]

thanks a lot dell66,your file virgine is ok for this ecu,i start car all looks fine.Cheers!

pass please