Punto 1.9 JTD - EDC15C7 - DTC remove

[pipina]

Hi, I have here Fiat punto 2001, 1.9 JTD 59kW, 0281001955.

I want to disable 2 DTC P0601 and P0236. The P0601 have just light and all work ok. The P0236 have light + limp mode .... I know all the consequencesbut I have disable this dtc because the car is with engine from stilo and variable turbo ... the customer just ask me if there is a posibility to make car without light and limp mode. I try to use DTC Remover 1.0.4.0 (http://www.digital-kaos.co.uk/forums/f173/dtc-remover-1-0-4-0-free-keys-all-369468/) and it work for light .... but for limp not. So I will be grateful if someone could do this for me.

regards

220724


220725

[arvedo]

I do not think you can remove this error see the turbo funcionamieno or solenoid

[pipina]

The turbo is non original from this car ... the problem is when the boost pressure is more than 2050mbar for 5s then the DTC apear this is normal because if I look in actual values the max nominal pressure is 2050 mbar but the turbo make it 2400mbar ... so any other option to repair this

[arvedo]

give less pressure of varying mechanical part and you work well

[pipina]

They already try this ... but then the car reach 2000 mbar too late at more than 2500 rpm till then the car is dead ...

[mario38]

dtc off...

[vuno01]

you can make a Map sensor emulator so the ecu always thinks the values are in the parameters.
i will try to find a scheme that i have to do that and send it to you.