EDC17CP14 passat 2.0L doesn't want to programming

[electroniquearts]

Hello my friend i have an EDC17CP14 for passat TDI 2.0L i read it with FG tech galleto 2 but the fump for flash is corrupted i need an original flash
the reference : edc17cp14
0 281 015 029
03L 907 309
Secondly I read another flash of edc17cp14 but he doesn't want to program on my old calculator
the ref of new calculator :
0 281 015 014
03L 906 022 ge
i nned help thank you

[electroniquearts]

the problem is the checksum?

[icezero2010]

your rar file from new flash is damaged

[electroniquearts]

your rar file from new flash is damaged
sorry here is the file

[electroniquearts]

sorry here is the file

i need repair flash of my old calculator please

[icezero2010]

ok i understand . But your old file is ok . you cant write a different software on this ecu you have a otp area and is this different galetto don?t write. what is when you write your ori back? is the ecu in startup loop or what?

[AlexandruP]

Before you make any change was the ecu work good?

[electroniquearts]

the old ecu sart car but in degraded mode don't ecced 3000 tr/m and on scan not dtc detected !!!!!!

[AlexandruP]

You are trying to clone ecu?

[electroniquearts]

yes but I believe the old flash is damaged !!

[AlexandruP]

You can't clone this ECU. Need to replace Tricore before you can make it.

[icezero2010]

i can clone the ecu but you must disable the immo ;-)

[AlexandruP]

i can clone the ecu but you must disable the immo ;-)

This is not cloning, this is disabling the IMMO

[icezero2010]

Its not enough to kill the immo he need his software on this ecu and this is the dataarea and he must clone his dataarea full clone on edc 17 is not possible! only with new ecu and optican!

[AlexandruP]

And MagPro2

[electroniquearts]

and where is the solution ??

[electroniquearts]

Its not enough to kill the immo he need his software on this ecu and this is the dataarea and he must clone his dataarea full clone on edc 17 is not possible! only with new ecu and optican!
and where is the solution??

[electroniquearts]

personne have a solution??

[ominimicu]

Solution? Swap MCU , immo eeprom and flash , from old ecu to new ecu. ( need an IR soldering station )
Solution 2: get new Keys coded at dealer

[icezero2010]

solution2 dont work :-) no dealer can the ecu reprogram ask ecutuners he can help you

[macxlulu666]

clone edc17 is no problem in vag or opel ,or bad programing in tp activ

[masterb]

clone edc17 is no problem in vag or opel ,or bad programing in tp activ

Hi mac

Can you tell us how you clone this ecus. Think only with nonpublic tools is possible.