IMMO VW GOLF Variant

[BrunoPT]

Hello to all,


I'm here with a car that is taking me seriously LOL's.
The car's owner lost the keys of the same, and then ordered a cannon door with two new keys in origin. Caught in the ignition lock and sent adapt new keys, what happens now picks ee car turns off.
I checked with vag-com and error immoblizador, logical.


Car data:


Vw Varitant year 2001
ECU: Magneti Marelli - 6k0906034E - IAW4LV.KA


Attached photos from the ECU.


My doubt is:


What is destined for EPROM immoblizador?
From what I saw to code new keys with vag-com, it is necessary to login, but unfortunately I do not know what is.


Can help.


greetings,


Bruno

[AlexandruP]

Read EEPROM inside ECU and post, we can calculate the PIN.

Then you can make 2 new keys using VAG-COM

[BrunoPT]

Read EEPROM inside ECU and post, we can calculate the PIN.

Then you can make 2 new keys using VAG-COM

Thanks
Can you tell me what I need to read eeprom to post?


I have 95080 3
Flash: 29F400BB


thank you

[BrunoPT]

Anyone?
Thanks

[BrunoPT]

Please Help me :)

[kugglefischer]

immo off is not possible.....
you have to make a key with AVDI.....
or another device.

or find the pin code from another memeber here....
just wanted to give you some input....

looks like your struggling.....

[BrunoPT]

Thanks for the reply.


But I was reading the eproom get the pin can add keys to the car without problems, the question is what is the eproom I'll have to read to calculate the pin

Reggards

[kugglefischer]

95080...next to the 29f400 psop to the right as in your picture

[BrunoPT]

Thanks.

File read atach

Can you calculate the pin?

[Mr BLACK]

try 0102 or swap this

[BrunoPT]

Don?t work.

People need help to calculate pin :)

Thanks all

[BrunoPT]

Help help :)

Enviado do meu GT-I9505 utilizando Tapatalk 4

[damian475]

hmn in this file pin 0102 is good

[BrunoPT]

hmn in this file pin 0102 is good

I put this pin in the login field 25 of the vag-com and says code error

[BrunoPT]

Attached a photo of the vag-com on the units, can help you with something?


The log with the error code 00102 gives


Please help

[BrunoPT]

Problem is that I can not access immobox.
About this matter is settled.


Thanks to all

[yugo45]

If you guys look at eeprom dump you can see that this is Immo 2 and there is no pin in ECU.
You must read Immo box.

BTW , I do not think this is Golf variant or someone mix 2 cars in one.
Immo box has GOL, LUPO , POLO, Golf Cabrio.

[BrunoPT]

Exactly, after some research I found really what it says.
Thanks again for the help.


Yes Golf Variant is a year 2001

[yugo45]

You probably will have lock time in immo box because you enter wrong pin before .
This immo box may show lock time, check this:
Meas.Block -08
group 24
All fields should have 0.0

If you have more the 0.0 then you must turn ignition on till you get all 0.0

When everything clears I would go first with 1530 pin.

[BrunoPT]

Tomorow i will try and post result. Thanks my friend

Enviado do meu GT-I9505 utilizando Tapatalk 4

[BrunoPT]

Hello friend.


Yet this is what I bring good news.


The pin smoothly enters code is 01530.
I try to encrypt the keys for vag-com but it does not.
Found that the two keys they sent to the mark, both have no immoblizador.
I tried to put one of there other chves that here we have, but without success.
What I find strange is the vag with with the key in the ignition on, I go to the field and 08 in group 1 where it says key gives status 0 and 1.


greetings,

[yugo45]

Like I said you probably have lock time in immo box.
Leave ignition on for 1 hr with battery charger on, then buy new transponder Id 48 and adopt keys.

[BrunoPT]

Ok Friend.

Tomorow tested it.

Thanks

[BrunoPT]

Hello guys,


Still problems with this case.
Arrived today a new key vw, encode with vag-com and the car picks up and goes down, any ideas?


thank you

[yugo45]

After adopting key you must Adopt ECU to cluster.
Address 17 instruments login with pin.
go to adaptation ch 000
Save . go back , close controller , turn ignition off for 1 min.
After this car should start.

[BrunoPT]

Thank you,
But the pin of the instruments I've not only got the pin immobox

[sepistar]

tou have no pin in cluster,because of immobox.so you have pin from immobox.just like yugo says go on and make adaption and if make all correctly it will work.
br.

[yugo45]

Sorry I made mistake go to :

25 immobilizer login with pin.
go to adaptation ch 000
Save . go back , close controller , turn ignition off for 1 min.
After this car should start.

[BrunoPT]

Solved,

Car is ok now :)

Thanks Friends.

[cqae]

THAT CODE SHOULD BE CORREECT, WAIT FOR A LITTLE INCASE THE SYSTEM HAS LOCKED YOU OUT