I have my corsa 2003 1.7DTI that overnight did not start

[kentrinite]

hellos
I just seek help because I have my corsa 2003 1.7DTI that overnight did not start. I change the battery, and she leaves no cles seer wheel / car clignote.rien to do .
I have the suitcase maxidiag MD801 tells me error P0602 and p1610.
P0602: engine computer deprogrammed.
p1610: electronic box anti-boot.
I remove the pins from the controller to have blown, d?gripp?es always seeing who blinks and the car not start

[perovuk]

yu need op com,or tech to program immobilizer function often happens when the flat batery

[kentrinite]

I must set the engine ECU or immobilizer

[perovuk]

go to immobilizer=special functions=program ecu and immobilizer present.for that you most have security code

[kentrinite]

I do not have a security code and I'd like to know if I can not do it manually

[perovuk]

whit opcom you can see sec.code in dash,but I do not know how to do manually,or is it posible manually

[kentrinite]

and I wanted to know if I program a new key is that fear the problem

[kentrinite]

how completely reprogram the ECU engine and re-associate with the immobilizer manually

[kentrinite]

I wanted to know if with op com I can solve the problem without the code reprogramming

[kentrinite]

I'd like to know if this version of op com can I solve my problem by immobolizer programmed into the computer because I'd buy the manual here221668221668

[kentrinite]

I'd like to know if with IMMO Tool OBD for Fiat Opel Immo may have always synchronize ecu and immobilizer

[kentrinite]

Immo Tool Obd For Opel Fiat Immo1 2 3 Ecu Pin Code Car Key Programmer Obd2 Cable - Buy Fiat Immo,Fiat Immo Tool,Opel Immo Product on Alibaba.com (http://www.alibaba.com/product-gs/709097120/IMMO_Tool_OBD_for_Opel_Fiat.html)

[cipijoint]

dont have pin? easy way Carprog . or read Immobox using TMS . and find pin in TMS. after PIN , use OPCOM as the other mate said.
Resynch in IMO the engine. or pay to dealer 15 euro for the PIN code and use OPCOM

[kentrinite]

I wanted cleared ecu and resynchronize with the immobilizer

[kentrinite]

P0602: engine computer deprogrammed.
p1610: electronic box anti-boot.

[kentrinite]

and program new engine ecu to old immo