How to restart ME9.7 from bootmode

[mariusz971]

Hi guys, I have a problem with one car. I was updating ecu and programming failure. Is still communication with ecu and is showing version data and Error code. Talking with other friends they tould me that all data is still in ecu just car won't start because ecu is still in boot mode. I have heared that is possible to restart ecu from bootmode after programming failure.
Is there somebody who has expiriance with this? Can somebody help me to resolve this nightmare? I appreciate any help because I'm realy in trouble, thank you

this is what I found:

Flashtec.ch (http://www.flashtec.ch/)www.flashtec.ch/***8206;


recovery function ( you can restart ecu flashing after a programming faliure ) ... Read more: BOOT-MODE BOSCH MEDC17 IROM/XROM. - TRICORE ...

and this is data from ecu

--- electronic control unit identification ---

Mercedes-Benz No. : 00 44 46 37 40
Supplier : Bosch
Hardware Version : 11 / 07
Software Version : 22 / 08
Diagnosis Version : 64 / 229
Date of Manufacture: 13.03.07


Fault Codes
============================================
D606 Control unit software 'DATA' missing or is corrupt.

==== Extended identification
Code Fingerprint of Module 1
Programming Date : 24-09-13
Tester Serial number: 10250910

Data Fingerprint of Module 1
Programming Date : 30-05-11
Tester Serial number: 10266510

Codeblock Software Identification of Module 1
Software Version : 08.48.01
Part Number : 0009024201

Datablock Software Identification of Module 1
Software Version : 06.00.30
Part Number : 009034200

Bootblock Software Identification of Module 1
Software Version : 05.26.30
Part Number : 009024201