PDA

View Full Version : CAN ANY BODY HELP ME....PLS - virgin dump for CLIO 1.2 8V CAN BUS



djadi1989
4th October, 2013, 12:17 PM
my problem is .. i don't have calculator because it stealled so i don't know the calculator's reference
for my car ( 1.2 8v motor D7F 726 with can bus ) because i don't find pin 58 .
i tested about 32 dumps without success. always immo on and no motor speed / no temperature on dash..... i tired

ecu is sirius 32 can bus (i am not sure )... year 2003 (clio 2 ph 2 1.2 8v ) i wante it without emulator

can any one help me to find the dump for my calculator....... thanks lot of.
vin is : VF1BB0FCF27361011

albertros
5th October, 2013, 09:45 AM
Hi,
I would start by ringing the dealer and asking for a price for the correct ECU and ask for the part number.
Now you know the correct ECU find a used one.
If you have a wire going to pin 58 it is k-line (providing it is a sirius 32n) 57, 27 are used when can bus.

8200 059 086 SEEMS TO BE THE PART NUMBER Have you got the correct ecu?

djadi1989
6th October, 2013, 02:41 PM
thanks for anwser albertros .... i try to program with this dump s11013000 c but don't work .

i want to know what is the correct ecu for my car sirius 32 or sim EMS 3132 because i don't have pin 58 .

albertros
6th October, 2013, 07:39 PM
Hi,
the 32n comes in kline or can which is why I suggest getting correct part number from dealer.
Once you know the correct number you can get the correct dump and re-set the rolling code.
Also you need to say what the problem is because it may be more than find a replacement ecu.
The attached file is good for clio 1.2 8v but probably be kline.
If yours is can then no way without emulator but you should not need an emulator if rolling code re-set.
Looking at used units a dump s110138000 may be nearer whats you require.