Bmw Explorer prog clone ?

[motorsport]

Hello some one have test Bmw Explorer chines learn keys and coding?
if it work good i see some come with version 13.10 ??

[pepi]

I am interest also on this product. BMW EXPLORER or BMW Multi Tool.

[aassfour]

BMW explorer Clone Rate 1/10
Multi tool Rate 9/10

[motorsport]

I see two version of bmw explorer one with cable tag and one without cabe just simple obd interface

[motorsport]

BMW explorer Clone Rate 1/10
Multi tool Rate 9/10
Are you sure because some seller not chines sell it and say full working with last version 13.4.10

[gwee]

BMW explorer Clone Rate 1/10
Multi tool Rate 9/10

Based on? Your guessing??

[motorsport]

Have some other info For key need add hitag 2

[obdmaster]

Have some other info For key need add hitag 2

No you dont BMW explorer adds key in key whole in dash

[912secured]

When I use just a pcf7936 have to precode but I have the one before the F series. Soft about 2 years old now. Do not have balls to try newest soft, 99% ruined most likely (I would kill them).

[motorsport]

I think this model without cable transponder working

BMW E/F SCANNER On Sale (http://uobd2.org/wholesale/bmw-e-f-scanner.html)

[motorsport]

No you dont BMW explorer adds key in key whole in dash
Are you sure because have spoke with russia seller original tool and say me need hitag2

[aassfour]

Based on? Your guessing??
based on killing 1 CAS3 of E90 ( when you check the coding on it , its all in Dutch u cant understand anything )
i have the multi tool never had any problem with it
i have the FVDI never had problem with it ( BMW key programming wise )

[gwee]

All my friends at DK told me that explorer is the best.

Anyway, I ordered one to do F series.

[motorsport]

All my friends at DK told me that explorer is the best.

Anyway, I ordered one to do F series.
you order clone?

[gwee]

you order clone?

Yes, clone :)

[obdmaster]

Are you sure because have spoke with russia seller original tool and say me need hitag2

Yes m8, on newer versions you add key in slot in dash look from Equipment (http://noimmo.lt/equipment/params/127/)



166 types of ECU supported
Diagnosis and interpretation of error codes
Reading and adjustment of run hours and maintenance intervals for: Oil, Filters, Brake pads, Spark plugs, Liquids, Inspections and services as well as ??, ?? inspections etc.
Adjustment of mileage and maintenance intervals
Change/Adjust FA code (currently in test mode)
Read/Write RAM/FLASH/EEPROM *
Read/Write ISN (marriage CAS and DME/DDE) *
ELV Reset (steering wheel lock)
Key read/write via OBD2 in CAS1, CAS2, CAS3, CAS3+ * (even after update by ISTA/P version 38!!!)
Learning key or transponder directly in the ignition coil
Lost keys blocking/unblocking
Change AIF (indexes of programming)*
Reading the last saved mileage from ECU
VIN change *
New battery registration

I think you can also add using hitag but i dont think neccessary.

you can buy hitag same version here http://www.uobd2.net/wholesale/hitag2-v31-programmer-red.html

[aassfour]

All my friends at DK told me that explorer is the best.

Anyway, I ordered one to do F series.
well maybe the one i had was a clone of the clone ... i just dont want to test it anymore in case it did the same thing as before .
let us know the result of urs when u receive it :)

[motorsport]

Yes m8, on newer versions you add key in slot in dash look from Equipment (http://noimmo.lt/equipment/params/127/)



166 types of ECU supported
Diagnosis and interpretation of error codes
Reading and adjustment of run hours and maintenance intervals for: Oil, Filters, Brake pads, Spark plugs, Liquids, Inspections and services as well as ??, ?? inspections etc.
Adjustment of mileage and maintenance intervals
Change/Adjust FA code (currently in test mode)
Read/Write RAM/FLASH/EEPROM *
Read/Write ISN (marriage CAS and DME/DDE) *
ELV Reset (steering wheel lock)
Key read/write via OBD2 in CAS1, CAS2, CAS3, CAS3+ * (even after update by ISTA/P version 38!!!)
Learning key or transponder directly in the ignition coil
Lost keys blocking/unblocking
Change AIF (indexes of programming)*
Reading the last saved mileage from ECU
VIN change *
New battery registration

I think you can also add using hitag but i dont think neccessary.

you can buy hitag same version here HiTag2 V3.1 Programmer (Red) (http://www.uobd2.net/wholesale/hitag2-v31-programmer-red.html)

from witch year version can add directly in slot ?

[aassfour]

Yes m8, on newer versions you add key in slot in dash look from Equipment (http://noimmo.lt/equipment/params/127/)



166 types of ECU supported
Diagnosis and interpretation of error codes
Reading and adjustment of run hours and maintenance intervals for: Oil, Filters, Brake pads, Spark plugs, Liquids, Inspections and services as well as ??, ?? inspections etc.
Adjustment of mileage and maintenance intervals
Change/Adjust FA code (currently in test mode)
Read/Write RAM/FLASH/EEPROM *
Read/Write ISN (marriage CAS and DME/DDE) *
ELV Reset (steering wheel lock)
Key read/write via OBD2 in CAS1, CAS2, CAS3, CAS3+ * (even after update by ISTA/P version 38!!!)
Learning key or transponder directly in the ignition coil
Lost keys blocking/unblocking
Change AIF (indexes of programming)*
Reading the last saved mileage from ECU
VIN change *
New battery registration

I think you can also add using hitag but i dont think neccessary.

you can buy hitag same version here HiTag2 V3.1 Programmer (Red) (http://www.uobd2.net/wholesale/hitag2-v31-programmer-red.html)

these functions for the Orig explorer , do they work on the clone ?

[king alie]

All my friends at DK told me that explorer is the best. Anyway, I ordered one to do F series.hello I am asking did you received the explorer clone and you testet our no because I am loking for the best clone tool for BMW keys 2004-2010 using obd not open case (explorer, multi tool, fvdi) thanks to all for help

[gwee]

hello I am asking did you received the explorer clone and you testet our no because I am loking for the best clone tool for BMW keys 2004-2010 using obd not open case (explorer, multi tool, fvdi) thanks to all for help

I cancelled the order just before shipment, a friend killed 3 CAS4 with the clone.

Might have to buy from Russia.

[aassfour]

i told u guys its a killer tool , i killed one CAS3 and throw it away , DONT GET NEAR this tool . u have been WARNED :D
or get the original or buy multi tool

[king alie]

hello
thanks for your reply because no one like to play with BMW case it is expencive

[hauwkee]

anyway in usa market customer so cheap don t like to pay they rather have dealer rape them

[cipijoint]

The cas3 fried were updated by ista P ? what was the CAS programming date in the UIF ?

[tech111]

hello can the bmw multitool read isn code and match ecu ???

[marioam]

hello can the bmw multitool read isn code and match ecu ???
no it doesnt

[tech111]

So between multitool clone explorer and fvdi wich one is most reliable????

[aassfour]

So between multitool clone explorer and fvdi wich one is most reliable????
for what purpose u want to use them ? multi tool is for key programming only
explorer key programming and coding , FVDI is for scanning programming coding and key programming ...
i would suggest original explorer if u want a reliable tool

[tech111]

In fact I am not planning to pay original price and I need it for key coding and ecu matching , I read that these tools can do some job so was wondering which of the three I mentioned is worth buying since they are same price range