PDA

View Full Version : Peugeot 307 EDC16C34



proel
4th October, 2013, 06:24 PM
Please need full bdm. After mpps ecu write eeprom is corrupted, lost coding ...

Peugeot 307 1.6HDI
0281011803
1037371084

thanks!

robkobg
4th October, 2013, 06:46 PM
The car is starting, but there is error for lost coding, isn't it? You will need to code injectors and the other specific data, like - type of gearbox, ESP, temp. sensor with PSA Lexia. You don't need to open the ECU.

proel
4th October, 2013, 07:04 PM
Yes, car starts, but revs up to 3000 rpm. Strange is that ecu don't accept injector coding and other codings like gear box type, starter type ...
Engine temp. must be over 70 C ?
I think eeprom is corrupted because on location 1E0-250h ussualy contents is 0, in my dump I have strange values.

morfej
4th October, 2013, 07:10 PM
For injector codes try to enter them with arow (up,down) keys, not type them.

proel
4th October, 2013, 07:19 PM
Not work with arrows

genius76
5th October, 2013, 02:11 PM
WHEN YOU RYDER WITH MMPS YOU GET TWO FILES ONE SECOND 1KB HERE IS INJECTORS YOURS IF I RIGHT
WHEN YOU WRITE BACK YOU SHOULD CHOICE TWO FILES
IF U NOT WRITE BACK SECOND FILE YOU CANOT PROGRAM INJECTORS

ITS FROM MY EXPIRENSE IF HERE SAME AS RENAULT I THING LIKE THIS

omglol
5th October, 2013, 02:18 PM
Yes, car starts, but revs up to 3000 rpm. Strange is that ecu don't accept injector coding and other codings like gear box type, starter type ...
Engine temp. must be over 70 C ?
I think eeprom is corrupted because on location 1E0-250h ussualy contents is 0, in my dump I have strange values.

Check injector codes 10 times before trying to program the ECU. Injector codes have checksums and if you don't read the codes from injectors correctly, you won't be able to input them.

I lost 2 days because of this on same car. :S

smokey08
5th October, 2013, 09:47 PM
Had same problem today with ecu not accepting coding. See this thread. (http://www.digital-kaos.co.uk/forums/f175/edc16c34-help-pin-372301/)