sos johnson controles c4 dead

[mekaoui]

hi
Following a change in mileage bsi;with PSA BSI TOOL
no light on dashboard
can you help me ?...
here's the file
johnson controls
boot21676031-5
HARD21678931-5

[mekaoui]

I think th? problem is in th? flash memory (m29w400db)
anyone can confirm
or I can find th? dump?

[benguessoum]

hi
BSI DEAD GOING TO GOD
you remplace other bsi and vrgin eeprom and you need code pin for run you car

[mekaoui]

hi
I found the Dump
but i have another problem with telecoding
I board the problem with wiper
and configuring radare
someone can help me please...

[metercar]

the BSI Magic Tool... anytime destroy BSI.
new or 2nd hand BSI fill with ff on the 95128 and telecode with pp is the good option in this case
swap 95128 is a "russian roulette", algorithm differs with upgraded flash on official service...and Bsi Tool do not compatibility with all versions of flash
the Eeprom on hand is the most securely work

[mekaoui]

the BSI Magic Tool... anytime destroy BSI.
new or 2nd hand BSI fill with ff on the 95128 and telecode with pp is the good option in this case
swap 95128 is a "russian roulette", algorithm differs with upgraded flash on official service...and Bsi Tool do not compatibility with all versions of flash
the Eeprom on hand is the most securely work
hi
thank you for your reply
I tried this method. vin, pin code, key learning telecoding manual all is ok... the starter does not turn, there is problem of configuration bsi
with a file that I changed everything is ok but I have a problem with wiper and radare.
if I had th? Dump 29w400 and M95128 on th? same BSI, I can vigine

[metercar]

depending on program version on the BSI, need coding the "started piloted"

[benguessoum]

HI ALL
NOT "started piloted" JUST TELECODE BY PP200 IN BSI GEARBOX MANULE NOT AUTOMATIQUE

OK AND RUN YOUR CAR