bt sport

[jimbojimjay]

cant pick up bt sport when doing a scan any ideas thanks

[ramalhosatelite]

do a satellite scan after unplug the box and plug it back and you will found a few bt sports one of them will work

[ramjet]

cant pick up bt sport when doing a scan any ideas thanks

and your equipment and image or patch is ????????????????????????????????????

[jimbojimjay]

and your equipment and image or patch is ????????????????????????????????????

sorry about that ,its old eagle 1000 with the commando image on,had bt sport 1 and 2 but just went of list and tried loads of scans just not picking it up thanks for any help

[mickm1]

I did this for E1 box, you will know how to manual scan a transponder im sure but the freqs etc are samepress menu
setup
service searching
manual transponder scan


fill in boxes as below


Frequency 10978
polarity vertical
FEC 5/6
symbol rate 22000


then press green ok to search. once complete to access new channels exit when done and BT sports should now work

[jimbojimjay]

I did this for E1 box, you will know how to manual scan a transponder im sure but the freqs etc are samepress menu
setup
service searching
manual transponder scan


fill in boxes as below


Frequency 10978
polarity vertical
FEC 5/6
symbol rate 22000


then press green ok to search. once complete to access new channels exit when done and BT sports should now work

tried that mate keep getting transponder fail after a few seconds thanks again for your help

[ASEK]

try 10979 freq symb 22000

[ramjet]

its actually on 12515 H 22000 , check king of sat for details

[ASEK]

Well it's on 11156 /23000 or 10979/22000

[ramjet]

Well it's on 11156 /23000 or 10979/22000

and if the court rules against one of the 2 parties it could well disappear by the 10th october , as at the moment its being dual fed pending a court decision

its also not just bt sports as dozens of channels are affected

[benny/9]

i have the channels open on a vu solo2
11156-v-23000 for the HD chns
10979-v-22000 for the SD chns

[mickthefish]

I had this problem with several E1 box's this week DM500s. The box's did not find any of the moved channels when scanned. The answer was to go into openpli website and download the new DM500 firmware they have just put there to solve this E1 problem. Flash the box with this firmware, do a automatic scan 28.2 then happy days. When commando update their firmware go back to your image of choice. There are plenty of E1 sky bouquets lists with the bt channels and updates on them knocking about.

[jimbojimjay]

I had this problem with several E1 box's this week DM500s. The box's did not find any of the moved channels when scanned. The answer was to go into openpli website and download the new DM500 firmware they have just put there to solve this E1 problem. Flash the box with this firmware, do a automatic scan 28.2 then happy days. When commando update their firmware go back to your image of choice. There are plenty of E1 sky bouquets lists with the bt channels and updates on them knocking about.
thanks for that just updated commando then did rescan still no bt sport any idea's thanks again

[Nutsandbolts]

Hi. Is your dish aligned correctly to pick up the new frequencies??? If possible try a second receiver and see what happens. Also is it one of those old type receivers where you have to delete the old channels before it scans the new ones in??.

Regards.

[ALAN 1]

Final freq for BT 1/2 12574H, sym 23000. They will be more freqs changes in 4 to 6 weeks when Astra2E will replace Astra 1N when Astra 1N moves to 19 east.

[jimbojimjay]

Final freq for BT 1/2 12574H, sym 23000. They will be more freqs changes in 4 to 6 weeks when Astra2E will replace Astra 1N when Astra 1N moves to 19 east.

ok thanks for that ill try again

[jimbojimjay]

update on my post,still no bt sport,now all bbc channels have gone done loads of scans but nothing any idea's thanks for any help

[happy_highlander]

Are you doing a network scan. Remember boxes like the tm500s will only scan the frequencies in the Satellite.xml unless you do a network scan (in essence a blind scan)

[jimbojimjay]

Are you doing a network scan. Remember boxes like the tm500s will only scan the frequencies in the Satellite.xml unless you do a network scan (in essence a blind scan)

thanks for that,mine box is the old eagle 1000 been running great till this week,but when i put the frequency in and try single transponder scan i keep getting transponder scan fail any idea's thanks again

[ramjet]

try a newer xml file as suggested above

check the enigma 1 section for help on it too

or load in the newer E1 catseye lists or similar E1 lists (settings)

[happy_highlander]

thanks for that,mine box is the old eagle 1000 been running great till this week,but when i put the frequency in and try single transponder scan i keep getting transponder scan fail any idea's thanks again

I have my E1 list running on tm500s with bt sports working. I need to finish updating it properly but you are welcome to try it as it is. As you will probably know my 28.2 enigma 1 and 2 lists don't get uploaded to dk but I can make a few changes to make the upload possible (not to break rules) if you need it to test with

[plutox2]

i cant get bt 1 bt2 all the numbers tryed but ther not on my tp list need help please my box is s11

[ramjet]

i cant get bt 1 bt2 all the numbers tryed but ther not on my tp list need help please my box is s11

put a new thread up in the openbox/slybox forum then