cloud ibox 2

[ellesmere11]

has anyone heard of this version 2 of the cloud box and its difference to the first one.

thanks

[digicon]

Been discussed elsewhere this appears to be a Clone of the MaxDigital XP1000 receiver do a google search for that box and it ill give you the specs for it to compare to the standard ibox

[lincsat]

There is now a Skybox branded mini solo, it has a metal case and looks more like a satellite receiver and less like a plain (experimenters) plastic case. The main board is the right way up, so heat can escape upwards. They do have the Ferrari V3.2 chip and include the RS232 module for updating the chip.

[mickthefish]

Seen this advertised about ?75 delivered from china, however they seem to only have a HDMI to connect to your telly. Could be a problem if you want to use it in the rug rats rooms with an older TV.

[ellesmere11]

Seen this advertised about ?75 delivered from china, however they seem to only have a HDMI to connect to your telly. Could be a problem if you want to use it in the rug rats rooms with an older TV. thanks for info where did you see it for 75 pound and are they a good seller.

thanks

[mo.p]

hi guys if its a Clone of the MaxDigital XP1000 receiver then its not a enigma2???

[bighun]

You can. Get a composite to scart converter to connect older TVs for a couple of pound also you can buy the ibox 2 from alibaba make sure you get one with the 600 MHz broad com chip in it

[digicon]

hi guys if its a Clone of the MaxDigital XP1000 receiver then its not a enigma2???

The MaxDigital XP1000 IS an enigma 2 Linux receiver


http://www.youtube.com/watch?v=QCrhGBfwpQw

[orientville]

Seems the updated version of the cloud ibox is being released 25/10/2013 This is the box with the 600 mhz processor the older one has the 333 processor.Price ive been told is ?102 delivered from China this includes p&p

[bighun]

i had an email from a chinese supplier and the ibox2 600mhz will be ready on 29/10/13 $102 delivered to the uk which is ?64 not to bad for a E2 box

[lombard]

these look very interesting, 600mhz, 1gb ram , 1gb flash, at that price, and runs vix 3.0 , would really like to test one of these out and see how it runs,

[bighun]

you will get the cloud ibox2 600mhz cpu here Cloud Ibox 2 600mhz Linux Os Full Hd With Iptv Support 3d Wifi Satellite Tv Receiver For Christmas Day Gift - Buy Cloud Ibox 2 600mhz,Cloud Iboxii 2 Iptv Support 3d Wifi Satellite Tv,Cloud Ibox Ii Linux Os Full Hd With Iptv Product on Alibaba.com (http://www.alibaba.com/product-gs/1331880932/cloud_ibox_2_600Mhz_linux_os.html) it will be ready on 29/10/13

[lombard]

think will be ordering one for sure, spec of this thing looks great and price :) will be great to see how it runs

[lombard]

anyone ordered the ibox 2 yet ? thanks

[bighun]

the box is still not on sale yet it should be on sale 29/10/13 according to lilly airsat

[ajax2061]

tempting, though solo2 slone tempting also anyone tried one of these ? Exactly Original Enigma 2 Linux Os Super Receiver Vu+ Solo 2 - Buy Vu+ Solo 2,Receiver Vu+ Solo 2,Original Receiver Vu+ Solo2 Product on Alibaba.com (http://www.alibaba.com/product-gs/1283545724/Exactly_Original_Enigma_2_Linux_OS.html)

[steviestring]

What is the best way to ask the box to be posted to avoid any further costs when delivered?

[bighun]

Most of the Chinese suppliers put the value of the box a lot lower than it is also they usually mark it as a gift I have bought a lot of stuff from China and have never had to pay any extra to customs in the uk

[kaisar1]

alot of things are being held up at customs, so be aware.

I have had to wait 1-2 weeks for my goods to be delivered, had to contact gtsclearance sending them payment receipt. So customs very expensive at the minute. They not going by the value written on order, instead the actual receipt needs to be shown

[SGTFlipFlop]

Messaged them about the cloud ibox 2 see what they say

[lombard]

alot of things are being held up at customs, so be aware.

I have had to wait 1-2 weeks for my goods to be delivered, had to contact gtsclearance sending them payment receipt. So customs very expensive at the minute. They not going by the value written on order, instead the actual receipt needs to be shown

Hi , did you have to show original proof of payment ? as the value declared would have been much lower ? how much customs did you pay and declared ?

Thanks

[tkm18]

alot of things are being held up at customs, so be aware.

I have had to wait 1-2 weeks for my goods to be delivered, had to contact gtsclearance sending them payment receipt. So customs very expensive at the minute. They not going by the value written on order, instead the actual receipt needs to be shown

Think it's just fedex that are doing that just now, but can see the rest jumping on board shortly.

[SGTFlipFlop]

Ordered mine, Can't wait for it to arrive

[mickmc68]

Think it's just fedex that are doing that just now, but can see the rest jumping on board shortly.

Fedex charged me ?23 for a shipment of 10 boxes where as DHL only charged me ?11 something for same size of order

Mick

[lombard]

Fedex charged me ?23 for a shipment of 10 boxes where as DHL only charged me ?11 something for same size of order

Mick

hi mate, what boxes ? and what was declared value ? Thanks

[mickmc68]

Cloud ibox 1s value put at $80 and sample dvd player i think m8

Mick

[bighun]

what price did you pay SGTFlipFlop (http://www.digital-kaos.co.uk/forums/members/80211-sgtflipflop/)

[SGTFlipFlop]

?70 delivered

Sent from my HTC One using Tapatalk now Free ('http://tapatalk.com/m?id=10')

[lombard]

Ordered mine, Can't wait for it to arrive

is that the ibox 2 ?

[lincsat]

Fedex charged me ?23 for a shipment of 10 boxes where as DHL only charged me ?11 something for same size of order

Mick

Lucky you, Fedex had charged me over ?100 on a carton of 10 - they took the declared value and added a "Standard charge" for delivery from China, which was different (higher) than the actual charge, then charged VAT on the lot, including the non-EU part of the shipping which is not subject to VAT. DHL are usually cheaper but have stuck one through on the same basis and held the delivery to ransom until paid.

[lombard]

Lucky you, Fedex had charged me over ?100 on a carton of 10 - they took the declared value and added a "Standard charge" for delivery from China, which was different (higher) than the actual charge, then charged VAT on the lot, including the non-EU part of the shipping which is not subject to VAT. DHL are usually cheaper but have stuck one through on the same basis and held the delivery to ransom until paid.

Hi, did they ask you to show original proof of payment ? like screenshot of actual payment, i had fedex do same to me on 5pcs

[lincsat]

No, they wouldn't budge. They said I could send the original commercial invoice (they had a copy anyway) then claimed Customs provide a list of "standard charges" for delivery and thay have to add that to the commercial invoice value. They said that the only way not to add the "standard charge" is to get a commercial invoice sent from the seller with a full value including itemised freight and proof they paid that value for freight. They insist it is correct for them to charge VAT on delivery services outside the EU.

[lombard]

oh right, with me they said the invoice was not good enough, they wanted to see original proof of payment, bank , paypal screenshot t etc as they seemed it undervalued , mine was declared $120 for 5pcs and looking here people seem to declare lower then that , so gave up on it, then 1 week later surprised as it was delivered

[blue boy]

I ordered the Cloud Ibox 2 today, cost $110 (?70) delivered with DHL from Airsat, on the subject of customs, yes they are hot at the minute, I ordered a ?160 Lenovo Smart Phone from China that has been stuck in customs for over a week just found out that the charges are ?38 VAT + ?13 processing charge, bought this on Amazon and to my surprise the seller has agreed to pay the customs charges, I find that when they sell on Amazon they will do anything not to get poor feed back.

[lombard]

Hi, so they have stock of ibox 2, i sent a message didnt get reply, will try tomorrow, cant wait to test these out as spec looks very good

[pl1976]

Same here sent a message still to hear back

[steviestring]

When paying paypal do I make payment as goods or gift?

[SGTFlipFlop]

I did goods, been in contact via email with the lady, she is sending DHL at a value of $15 on the label

Sent from my HTC One using Tapatalk now Free ('http://tapatalk.com/m?id=10')

[steviestring]

Was it lily airsat? Did u ask for the value of $15 to be put on label?

[SGTFlipFlop]

No was Linda Wang and she recommended that price

Sent from my HTC One using Tapatalk now Free ('http://tapatalk.com/m?id=10')

[blue boy]

Airsat already include the Paypal charge when you buy.

You need to choose the 'goods or services' option, the seller then picks up the Paypal charge. If you choose the other option then you will be charged again an end up paying twice.

[lombard]

No was Linda Wang and she recommended that price

Sent from my HTC One using Tapatalk now Free ('http://tapatalk.com/m?id=10')

hi, got contact info for linda wang ? thanks

[SGTFlipFlop]

Will do when I get home from work

Sent from my HTC One using Tapatalk now Free ('http://tapatalk.com/m?id=10')

[bighun]

Been trying to get a hold of lily airsat all day but have had no reply I have now got in touch with lilly Wang I hope she replies

[SGTFlipFlop]

hi, got contact info for linda wang ? thanks


Contacted her through this link

Cloud Ibox 2 600mhz Linux Os Full Hd With Iptv Support 3d Wifi Satellite Tv Receiver For Christmas Day Gift - Buy Cloud Ibox 2 600mhz,Cloud Iboxii 2 Iptv Support 3d Wifi Satellite Tv,Cloud Ibox Ii Linux Os Full Hd With Iptv Product on Alibaba.com (http://www.alibaba.com/product-gs/1331880932/cloud_ibox_2_600Mhz_linux_os.html)

[steviestring]

Got email with price do I just pay on paypal or do I have to place order on alibaba, 1st time ordering?
Cheers

[SGTFlipFlop]

Get her to confirm price and paypal details, Send the money, then E-Mail her with transaction ID, name, address, postcode and phone number

[pl1976]

Not stock till next month now. They have offered me a skybox F5S AMIKO8900 any thoughts on this one?


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[lombard]

Not stock till next month now. They have offered me a skybox F5S AMIKO8900 any thoughts on this one?


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

doesnt compare to ibox 2, also its enigma 2, its got vix 3.0 image for it and with the spec of box should fly

[lombard]

Will do when I get home from work

Sent from my HTC One using Tapatalk now Free ('http://tapatalk.com/m?id=10')

Thanks for that

[pl1976]

Think I will hold off for ibox 2 then


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[bighun]

i got an email of lily airsat this morning the boxes are in stock $65 a piece and $110 delivered to the uk have just ordered one

[pl1976]

http://img.tapatalk.com/d/13/10/29/bugy4y8e.jpg

This is the one I enquired about?



Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[steviestring]

ordered one this morning, upgrading from f5s box. Will i need to buy uk plug for box? which setup do i need to follow to set box up when it arrives?
Thanks

[RuberDuck]

doesnt compare to ibox 2, also its enigma 2, its got vix 3.0 image for it and with the spec of box should fly

maybe they work for now but it does not have any form of support from ViX what so ever and never will either.

[pl1976]

Can someone give me a link please to ibox2 that's in stock


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[bighun]

here is a link to the right ibox2 Cloud Ibox 2 600mhz Linux Os Full Hd With Iptv Support 3d Wifi Satellite Tv Receiver For Christmas Day Gift - Buy Cloud Ibox 2 600mhz,Cloud Iboxii 2 Iptv Support 3d Wifi Satellite Tv,Cloud Ibox Ii Linux Os Full Hd With Iptv Product on Alibaba.com price (http://www.alibaba.com/product-gs/1331880932/cloud_ibox_2_600Mhz_linux_os.html)price is $110 delivered to the uk with dhl at todays dollar rate that is ?68.54 good price for what you get

[lombard]

maybe they work for now but it does not have any form of support from ViX what so ever and never will either.

its same with the vu solo clones, after while dont need really updates, as most plugins do the job, and could get patched released updated images,

[bighun]

who needs vix as blackhole and the ferrari team always brings out updates for clone boxes and all the plugins are spot on

[tkm18]

Nextbay are shipping them from next week.

[lombard]

made order yesterday , anyone's order sent out yet ?

[pl1976]

They have ran out of them also available 4/11


here is a link to the right ibox2 Cloud Ibox 2 600mhz Linux Os Full Hd With Iptv Support 3d Wifi Satellite Tv Receiver For Christmas Day Gift - Buy Cloud Ibox 2 600mhz,Cloud Iboxii 2 Iptv Support 3d Wifi Satellite Tv,Cloud Ibox Ii Linux Os Full Hd With Iptv Product on Alibaba.com price (http://www.alibaba.com/product-gs/1331880932/cloud_ibox_2_600Mhz_linux_os.html)price is $110 delivered to the uk with dhl at todays dollar rate that is ?68.54 good price for what you get




Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[jamesybhoy]

looking forward to trying one of these out

[dstarjun]

the cloud Ibox II is ready to sell now.

New model dvb-s2 full hd cloud ibox 2 with IPTV streaming satellite tv receiver support 3D,youtube,3G and for christmas day gift, View cloud ibox v3 enigma 2, VU+ Product Details from Shenzhen Jehnson Watch Industry Co., Ltd. on Alibaba.com (http://caretier.en.alibaba.com/product/1296671374-219851311/New_model_dvb_s2_full_hd_cloud_ibox_2_with_IPTV_st reaming_satellite_tv_receiver_support_3D_youtube_3 G_and_for_christmas_day_gift.html)

thank you

[mickmc68]

I gave up waiting and got 6 Vu solos v3.2 delivered for ?400 lol

Mick

[pl1976]

the cloud Ibox II is ready to sell now.

New model dvb-s2 full hd cloud ibox 2 with IPTV streaming satellite tv receiver support 3D,youtube,3G and for christmas day gift, View cloud ibox v3 enigma 2, VU+ Product Details from Shenzhen Jehnson Watch Industry Co., Ltd. on Alibaba.com (http://caretier.en.alibaba.com/product/1296671374-219851311/New_model_dvb_s2_full_hd_cloud_ibox_2_with_IPTV_st reaming_satellite_tv_receiver_support_3D_youtube_3 G_and_for_christmas_day_gift.html)

thank you

Just emailed hopefully they have stock


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[RuberDuck]

who needs vix as blackhole and the ferrari team always brings out updates for clone boxes and all the plugins are spot on

not if the icloud 2 are based on the xp1000 boxes they wont as BH dont make images for them.

[bighun]

any patched version of blackhole will work with clone boxes as long as they are running enigma 2 why pay ?300 for a box when you can get a clone box that will do the exact same job for ?70 ok they are chinese copies but where are most of the legit boxes made CHINA as for the dear boxes they are just ripping the arse out of the prices components and parts are no more than ?40 to build the box with cheap labour which everybody uses i have worked in electronics all my life and do not like getting ripped of with the prices the likes of vu and dreambox charge

[digicon]

According to the literature posted about this Cloud iBox 2 then it does appear to be a clone of the XP1000 which means RD is correct as BH do not support this type of receiver, yes i agree a patched (Drivers) image if one existed from BH would work on the box but as far as i am aware there are non available and the Ferrari team who clone the VU's are highly unlikely to release one either as they support there own clone receivers.

Plenty of other images to choose from for the iBox2 but at the moment no BH

[dacap]

Is this one not suitable? http://www.digital-kaos.co.uk/forums/f188/vu-solo-blackhole-2-0-6-ferrari-v2-toysoft-372208/

[bighun]

the icloud 2 that is on sale is a faster cpu than the xp1000 600mhz compared to 500mhz as for blackhole 2.0.6 by ferrari it should work but we will need to wait and see when the box comes

[pl1976]

I gave up waiting and got 6 Vu solos v3.2 delivered for ?400 lol

Mick

Do you know what the seller was m8. Am going round in circles here trying to get a ibox2


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[bighun]

to get the cloud ibox2 you will need to email lilly airsat here 600mhz Linux Os Cloud Ibox 2 Full Hd With Iptv Support 3d Wifi Satellite Tv Receiver - Buy Cloud Ibox 2,Cloud Ibox 2 Iptv Streaming,Cloud Ibox 2 Tv Player Product on Alibaba.com (http://www.alibaba.com/product-gs/1295714360/600Mhz_linux_os_cloud_ibox_2.html) i have ordered one already just waiting for it to come

[lombard]

hi anyone got reply about it being dispatched yet ? also is this by ferrari ? as no info to suggest that

[pl1976]

to get the cloud ibox2 you will need to email lilly airsat here 600mhz Linux Os Cloud Ibox 2 Full Hd With Iptv Support 3d Wifi Satellite Tv Receiver - Buy Cloud Ibox 2,Cloud Ibox 2 Iptv Streaming,Cloud Ibox 2 Tv Player Product on Alibaba.com (http://www.alibaba.com/product-gs/1295714360/600Mhz_linux_os_cloud_ibox_2.html) i have ordered one already just waiting for it to come

Just emailed her hopefully get one for Xmas :-/


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[digicon]

Is this one not suitable? http://www.digital-kaos.co.uk/forums/f188/vu-solo-blackhole-2-0-6-ferrari-v2-toysoft-372208/


the icloud 2 that is on sale is a faster cpu than the xp1000 600mhz compared to 500mhz as for blackhole 2.0.6 by ferrari it should work but we will need to wait and see when the box comes


The Clue to that is in the title with the word FERRARI that is the Clone chip built inside the Receivers and as i previously stated FERRARI only support there own Clone receivers which include DM800,800se,500HD,7020HD,8000HD,Vu Solo,Vu Duo,Vu Uno etc...

From what i can see FERRARI do not have anything to do with either of these Cloud Ibox's.

So if you do decide to load the image you mentioned prepare to have yourself a very expensive doorstop.

Might i suggest that some of you members actually do a little investigative reading before you actually purchase one of these receivers and dont just jump on the bandwagon so to speak, As it clearly states in the adverts from many of the Clone manufacturers that these receivers are compatible with images from Vix,OpenPLI & Open AAF and have ZERO support from Blackhole.

Hopefully this may slow down the influx of posts on here in the next few weeks regarding to "why my iBox2 is not working when i flashed a Blackhole image onto it" type of posts

Regards

[lombard]

just been told my order will be ready monday, i myself prefer vix 3.0 and openpli, so will be testing the vix 3.0 image , im very interested on how these will run with having that spec, with 1gb flash, should be fine for picons, epg storage

[bighun]

the original cloud ibox works with ferrari blackhole 2.0.6 so we can only hope that the new box works ok

[lombard]

the original cloud ibox works with ferrari blackhole 2.0.6 so we can only hope that the new box works ok

Hi, i think your confused mate, these are not made by Ferrari , and also the Ibox 2 is based on the original OCTAGON-SF8-HD / MaxDigital XP1000 receivers, which dont have blackhole , only Vix,OpenPLI & Open AAF , the cloud ibox is based on Vu Solo which had blackhole that's why it had it

[lincsat]

The original Cloud I-Box is a Vu+ Solo copy, it does not have a Ferrari chip but can use Ferrari modded Vu+ Solo images. The I-box2 is NOT a Vu+ solo copy, it is a XP1000 copy and can NOT use vu+ Solo images. Neither Ferrari nor Blackhole currently do anything with XP1000 images.

There also appears to be 2 different specs for the I-Box2, 1 with 1G Ram and Flash and another with 4G Ram and 2G Flash, don't know if they will both work with the same image.

[digicon]

the original cloud ibox works with ferrari blackhole 2.0.6 so we can only hope that the new box works ok


The iBox2 will not as Lombard clearly pointed out the iBox is the same chipset as the Vu Solo 'VU' being the operative word as the Blackhole Team work on Images exclusively for 'VU'

Again pointed out the iBox2 is based on a different broadcom chipset which 'VU' do not use in any current receiver they have on the Market.

Again as i previously stated read the literature that the Clone manufacturers give with there clone model and there is no mention of Blackhole image and never will be

[bighun]

i am just on messaging with lily airsat as we speak and this the answer i got it can supported officially by OpenPLi, OpenAAF and the ViX Team

[RuberDuck]

i am just on messaging with lily airsat as we speak and this the answer i got it can supported officially by OpenPLi, OpenAAF and the ViX Team

no officially in it, at least not from vix or atv / ( aaf ), the OE-Alliance will never offer support for clones.

[lombard]

i am just on messaging with lily airsat as we speak and this the answer i got it can supported officially by OpenPLi, OpenAAF and the ViX Team

Hi, yes knew that already mate, as thats what Octagon SF8 HD and MaxDigital XP1000 run on , takes images from them receivers , the xp1000 is changed to Octagon SF8 HD , so flash same way as you do with them , be interested about the 1gb flash usage, as the orginal models its based on is only 128MB flash , will it show the extra flash memory ? would easily take picons, plugins, EPG no problem

[pl1976]

Anybody heard anything about there boxes being dispatched


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[bighun]

i was told by lily airsat that they will be back in stock 4/11/13 and it will be sent shortly after by dhl

[pl1976]

Yep a was the same she asked me to give her del addy & contact number


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[bighun]

same here can`t wait for it to come

[pl1976]

Did you's get charged for the box?


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[bighun]

what do you mean it cost $115 delivered to the uk

[pl1976]

She just asked me for details but I've not paid anything


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[SGTFlipFlop]

She loves you long time

Sent from my HTC One using Tapatalk now Free ('http://tapatalk.com/m?id=10')

[pl1976]

Lol m8 maybe she will be in the box


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[blue boy]

I ordered and paid for a one last Monday, I was told it would be shipped next day, I have had numerous message chats with Lily since, apparently the boxes are done but the remote controls have not arrived yet, I will keep you informed.

[rigsby71]

I've had the same message aswell about the remotes not being ready yet.

[bighun]

same here i was on messaging this morning and lily said the remotes are coming in today

[mo.p]

m8 Any chance if can sende me link plzzzz Thank You very much in advance!!!

[bighun]

you will get them here Cloud Ibox 2 600mhz Linux Os Full Hd With Iptv Support 3d Wifi Satellite Tv Receiver For Christmas Day Gift - Buy Cloud Ibox 2 600mhz,Cloud Iboxii 2 Iptv Support 3d Wifi Satellite Tv,Cloud Ibox Ii Linux Os Full Hd With Iptv Product on Alibaba.com (http://www.alibaba.com/product-gs/1331880932/cloud_ibox_2_600Mhz_linux_os.html)

[SGTFlipFlop]

Dear :
Hope your everything goes well.
Our supplier of remote ctrl got fire, so delay deliver the remote to us. first time they told me 4th/Nov . We visit the remote factory today,according to the condition, they send the remote earliest time is 8th/Nov.
cloud ibox II is the newest model on the market, the process maybe meet some problems, thanks a lot your support.
if you can wait the sample until 8th/Nov, we will do our best for you in future.
If you can not wait, thanks all the same, and please leave your account, we will return your money within 2 working days.We are so sorry to bring you inconvenience.
Best Regards

[theuchi]

wow and i was about to get a DM528 why would i not get this box :D

im just confused what link should i use to order one?

[lombard]

Hi, just got message , for air, with tracking number, been sent with fedex, even though asked for DHL , trackings not working yet maybe needs time to update,

[flemillas]

Hi, just got message , for air, with tracking number, been sent with fedex, even though asked for DHL , trackings not working yet maybe needs time to update,

and what about the TAX?

I want to buy one of this.....I?m from Spain but I worry about the taxes and service fees

Thank you!

[bighun]

i have bought a lot of electronics from china usually single items and have never been charged for anything the seller usually puts the value a lot less than it is and marks it as a gift i think maybe that some buyers are buying lots of 5 or more and that is why they are being checked by customs

[trinidat]

Ordered two boxes at aliexpress with fedex. Will report incoming success!

[flemillas]

i have bought a lot of electronics from china usually single items and have never been charged for anything the seller usually puts the value a lot less than it is and marks it as a gift i think maybe that some buyers are buying lots of 5 or more and that is why they are being checked by customs


I have bought a lot to China, but I have never been sent anything by FedEx, so I ask for taxes .... is what worries me.


thanks

[bighun]

i was messaging lily airsat yesterday and she said it would be delivered by dhl

[trinidat]

My chinese seller (Shania Lee) wrote this mail today:

"Hi xxxxx, we will send it this week. Because cloud ibox II will be in stock before the weekend. Thanks for your waiting!"

Lets see and wait :)

[bighun]

i have just been on messaging with lily airsat my box has been dispatched with dhl and i have got a tracking number

[pl1976]

Just got response from lily 110 del. just ordered


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[steviestring]

Upgrading from f5 box, any body point me in the right direction for tutorials etc on how to put on the media plugins, epg guides etc

[bighun]

you just need to get vucc this is a program that will send all your plugins by ftp to your box first you will need to get your boxes ip address put that into vucc example 192.168.1.x last number being your box put your ip into vucc username is root leave password blank press connect once that is done press ftp that will bring up filezilla in that you will get a lot of directories click on tmp and put copy your plugins in ipk format there once you have done that go to your box and install them through your boxes remote

[pl1976]

Do these come with preloaded f/w


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[andyd123]

I have some on the way they were shipped today will post update in a few days when they arrive.

[steviestring]

Thanks bighun does it matter what image u use to use vucc programme or is it used with all images eg openpli and vix

[mcbee]

Decided to join u lot so jumped on the band wagon and ordered from Lily airsat yesterday $110 looking forward to getting it

[bighun]

you just install vucc on your pc or laptop and run it i am using openvix just now i have used it with blackhole also

[pl1976]

Lily just confirmed dispatched with tracking number. How long does delivery normally take?


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[andyd123]

If its coming DHL or FedEx you should have it Monday / Tuesday next week as long as there's no customs delays.

[steviestring]

Does it come with uk power supply?

[lombard]

Does it come with uk power supply?

doesnt really matter, its figure 8 cable, or just use uk plug,

[lombard]

I got tracking number and says should get delivered on tuesday, also i been told the CPU is 501mhz not 600mhz, also its 4GB ram / 2GB Flash, which seems massive, cant wait to load vix on it, and see how it runs :) , cant wait to hear others experience !

[digicon]

Dont get your hopes up on the massive Flas/Ram capacity as its a clone they will also have cloned the original spec which means the following

2 Gigabit Flash = 256mb & 4 Gigabit Ram = 512mb

[lombard]

Dont get your hopes up on the massive Flas/Ram capacity as its a clone they will also have cloned the original spec which means the following

2 Gigabit Flash = 256mb & 4 Gigabit Ram = 512mb

hi, ya was worried about that will find out soon enough

[SCOOBY_666UK]

Is this box HDMI-CEC 1.4? So that it can be used with the Xbox One.

[pl1976]

Anybody got there's up and running yet? Mines is at East Midlands. What would be the best USB wifi adapter to buy for this ?


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[SGTFlipFlop]

Mine is at East Midlands aswell

Sent from my HTC One now Free ('http://tapatalk.com/m?id=10')

[rigsby71]

Mines very far east of the midlands, but in transit.

[lombard]

looks like you guyz will be getting it on monday / tuesday , what image you guyz gonna try ? im gonna try the latest vix 3.0 build

[SGTFlipFlop]

ViX for me too

[lombard]

im just worried we not gonna get the full memory to use, or ram, as the image and box this is based on is xp1000 which has 512mb ram and 256mb flash, so we might be just stuck using upto that ,

[mcbee]

MY box is in Dublin according to tracking hoping to get it monday or tuesday . I will continue to use openvix on it as it has worked well on my solo clone box for the past year.Downloaded the latest images for Octagon SF8HD and MaxDigital XP1000 which i believe the box is based on.

[pl1976]

Could someone upload the best image please


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[lombard]

Could someone upload the best image please


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

well it takes images from the Octagon SF8HD and MaxDigital XP1000 , which is Openpli 4 and Vix 3.0 just get the images from there, from the images homepage. no blackhole, but i always preferred openpli and vix anyway

[bighun]

my box is also in east midlands maybe get it monday or tuesday

[iain66]

I live 10 mins from East mids airport want me to run up and get all your boxes for you lol

[bighun]

that would be nice but i don` think dhl would let you

[blue boy]

Mines in our local DHL depot in Liverpool, going on holiday for 10 days on Monday morning so will miss the delivery, great really coz when I get back you guys will have tested and sorted it all out.

[lombard]

should get mine tomorrow, so have prepared downloaded latest vix 3.0 and openpli 4.0 :)

[bighun]

lombard have you any idea what image does the box come with

[flemillas]

why don?t you use a Vu version of Vix? you are talking about other versions of Vix....and i do not understand the reason....

Thanks

[lombard]

why don?t you use a Vu version of Vix? you are talking about other versions of Vix....and i do not understand the reason....

Thanks

because this is not a vu box, it uses images for Octagon SF8HD and MaxDigital XP1000 , which the ibox 2 is based on these receiver , like you wouldn't use vu duo image on vu solo would you ?

[lombard]

lombard have you any idea what image does the box come with

probably vix, but i prefer to get latest build of vix and flash it and then add in preferred plugins etc, also will try openpli 4.0

[flemillas]

because this is not a vu box, it uses images for Octagon SF8HD and MaxDigital XP1000 , which the ibox 2 is based on these receiver , like you wouldn't use vu duo image on vu solo would you ?

But in the Chinese web, this box appears within clones vu .....

[bighun]

i have been on messaging to the supplier and they come with openpli on them

[pl1976]

Al get mine today on courier van this morning


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[lombard]

mine too, will try latest build of vix 3.0 see how it goes

[pl1976]

Lombard where did you get that image? Do you just load it via usb


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[lombard]

Lombard where did you get that image? Do you just load it via usb


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

Still waiting for mine, i just got image from vix homepage, for OCTAGON-SF8-HD-XP1000 , as was told these are based on them receivers so would take there image, yes flash via usb , probably need to find instructions how to flash the xp1000 receiver as should be same really , hoping will hear from others today, will update when i get mine and flash vix 3.0

Thanks

[pl1976]

Cheers Lombard much appreciated


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[mezzyg]

It would be good if you could confirm the memory sizes.

Sent from my SM-N9005 using Tapatalk 2

[lombard]

It would be good if you could confirm the memory sizes.

Sent from my SM-N9005 using Tapatalk 2

i aint got it yet so cant confirm anything

[andyd123]

Heres the flash instructions I found:

Flashing the Receiver. Maxdigital XP1000
***8211; Fully power the receiver down via the rocker switch at the rear of the receiver.
***8211; Insert the USB stick containing the image files into the rear USB port on the receiver.
***8211; Power the receiver on from the rear rocker switch
***8211; Wait for both the RED Recording LED and the LED on the front standby button to appear
RED, once you see this you must press the CH+ located behind the flap on the front of the
receiver to initiate the flashing process.
***8211; Wait for the image to flash, during this time the Standby button LED will appear purple to
indicate that the image is being flashed.
***8211; When the flashing process has completed the receiver will automatically reboot.

[andyd123]

Heres the flash instructions I found:

Flashing the Receiver. Maxdigital XP1000
? Fully power the receiver down via the rocker switch at the rear of the receiver.
? Insert the USB stick containing the image files into the rear USB port on the receiver.
? Power the receiver on from the rear rocker switch
? Wait for both the RED Recording LED and the LED on the front standby button to appear
RED, once you see this you must press the CH+ located behind the flap on the front of the
receiver to initiate the flashing process.
? Wait for the image to flash, during this time the Standby button LED will appear purple to
indicate that the image is being flashed.
? When the flashing process has completed the receiver will automatically reboot.

[lombard]

Hi, received it and aint that impressed so far, first boot it was loaded with openpli 4.0 but didnt check what date , should have made a backup of it, was in a rush to load vix 3.0 , so downloaded vix 3.0 latest build for xp 1000, it flashed fine, but stuck on startup , with xp1000 hd receiver on screen , so downloaded older builds, even tried openpli 3.0 and same, then contacted air, they then gave link to vix 3.0 , this flashed fine, but its build 600 which is quite old, even vu solo goes upto 721 build, and aint getting full memory , this is what im getting

Total memory 236416 which i have no idea what it is ?
Flash total 105.5mb which is way off the advertised 2gb

so don't use images from xp1000 receiver they wont work and if anyone can make backup of the image that's already on it which is openpli 4.0 that would be great ,

not a great start !

[pl1976]

Got mine will try when a get home


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[SGTFlipFlop]

Mine ain't here yet

[lombard]

thinking you guyz will have openpli 4.0 on it, if can make a backup of it and give me link that would be great, stuck here on vix 3.0 build 600,

[digicon]

Dont get your hopes up on the massive Flas/Ram capacity as its a clone they will also have cloned the original spec which means the following

2 Gigabit Flash = 256mb & 4 Gigabit Ram = 512mb


Hi, received it and aint that impressed so far, first boot it was loaded with openpli 4.0 but didnt check what date , should have made a backup of it, was in a rush to load vix 3.0 , so downloaded vix 3.0 latest build for xp 1000, it flashed fine, but stuck on startup , with xp1000 hd receiver on screen , so downloaded older builds, even tried openpli 3.0 and same, then contacted air, they then gave link to vix 3.0 , this flashed fine, but its build 600 which is quite old, even vu solo goes upto 721 build, and aint getting full memory , this is what im getting

Total memory 236416 which i have no idea what it is ?
Flash total 105.5mb which is way off the advertised 2gb

so don't use images from xp1000 receiver they wont work and if anyone can make backup of the image that's already on it which is openpli 4.0 that would be great ,

not a great start !


As i explained in the post above its worked out in bits and not bytes so Flash is 256mb and ram is 512mb simple

[mortmaru]

Hi, received it and aint that impressed so far, first boot it was loaded with openpli 4.0 but didnt check what date , should have made a backup of it, was in a rush to load vix 3.0 , so downloaded vix 3.0 latest build for xp 1000, it flashed fine, but stuck on startup , with xp1000 hd receiver on screen , so downloaded older builds, even tried openpli 3.0 and same, then contacted air, they then gave link to vix 3.0 , this flashed fine, but its build 600 which is quite old, even vu solo goes upto 721 build, and aint getting full memory , this is what im getting

Total memory 236416 which i have no idea what it is ?
Flash total 105.5mb which is way off the advertised 2gb

so don't use images from xp1000 receiver they wont work and if anyone can make backup of the image that's already on it which is openpli 4.0 that would be great ,

not a great start !

Digicon it's still wrong I know your calculations on what it should be are correct based on the information to do with item being sold but as the quoted above states they don't add up to that it is 128mb flash and 256mb ram. (original are only 128mb flash & 512mb ram)

The ram may be simply available ram so 256 is currently being used so in that case it would add up to 512 if not they have halved the ram from the original box.

Basically it looks like they have lied to catch people out the give away is in digicon calculation why would a clone have more flash then original it was cloned from especially with memory prices being very high at the moment?

[SGTFlipFlop]

Mine is taking longer to get from East Midlands to me than it did to get from China to East Midlands, Pretty poor ha

[pl1976]

Hi, received it and aint that impressed so far, first boot it was loaded with openpli 4.0 but didnt check what date , should have made a backup of it, was in a rush to load vix 3.0 , so downloaded vix 3.0 latest build for xp 1000, it flashed fine, but stuck on startup , with xp1000 hd receiver on screen , so downloaded older builds, even tried openpli 3.0 and same, then contacted air, they then gave link to vix 3.0 , this flashed fine, but its build 600 which is quite old, even vu solo goes upto 721 build, and aint getting full memory , this is what im getting

Total memory 236416 which i have no idea what it is ?
Flash total 105.5mb which is way off the advertised 2gb

so don't use images from xp1000 receiver they wont work and if anyone can make backup of the image that's already on it which is openpli 4.0 that would be great ,

not a great start !

No so good m8. Could you post a link to the working vix 3.0 please


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[lombard]

No so good m8. Could you post a link to the working vix 3.0 please


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)


here is what they sent its build 600 which is quite old but it got the box working again, they told me they will send me latest build and also openpli 4.0 tomorrow , you should send them message and also about not getting full memory

QQMail - File Hub (http://en.mail.qq.com/cgi-bin/ftnExs_download?k=0e653339ed8695cb8e44c93942660419 005d010c525204011d545001564b020e56011e005c55551b01 5151080150000e05525108646f364e405403095448014c3058&t=exs_ftn_download&code=0e39df66)

if anyone got there box can they make a backup of openpli 4.0 which was pre loaded, i was in a rush to try vix and never bothered backing up what was already on it :(

[SGTFlipFlop]

How do you save the backup?

[SGTFlipFlop]

Also what is the login details for the box the usual root-dreambox doesn't work

[armstrongstreener]

why not just go on the openpli website and download the latest 4.0 image from there?

[lombard]

How do you save the backup?

check in plugins, backup 1-1 usb ? im just stock on vix 3.0 build 600 and don't really wanna keep it on rather use openpli 4.0

[SGTFlipFlop]

Need the login detail, Cannot login to see the root of my device

Username - root
Password - dreambox

doesn't work

[armstrongstreener]

try with no password mate

[SGTFlipFlop]

try with no password mate


Didn't work, and there is no manual to refer too either

[digicon]

Digicon it's still wrong I know your calculations on what it should be are correct based on the information to do with item being sold but as the quoted above states they don't add up to that it is 128mb flash and 256mb ram. (original are only 128mb flash & 512mb ram)

The ram may be simply available ram so 256 is currently being used so in that case it would add up to 512 if not they have halved the ram from the original box.

Basically it looks like they have lied to catch people out the give away is in digicon calculation why would a clone have more flash then original it was cloned from especially with memory prices being very high at the moment?


and i still cant see the Image being only around 23mb Vix works out compressed at just under 42mb so uncompressed it will be higher so total Flash @ 128 - 60 mb say should be around 68 left

[digicon]

Didn't work, and there is no manual to refer too either


Use the frontend VUCC to FTP in as it allows no password override

[SGTFlipFlop]

Already tried that, I get a access violation at address error with that application

[digicon]

I use the OpenPLI 4.0 image on 3 of my receivers here and none have had passwords on, OpenPLI dont password there images

[bighun]

could anybody give me a link to the image of vix that works with this box

[SGTFlipFlop]

I have to say this login shizzle has me beat

[digicon]

I have to say this login shizzle has me beat

Although the OpenPLI 4.0 image has no password have you tried telnet - change password and then tried to login with the new password.

[SGTFlipFlop]

I win, a simple Reset factory settings has it back working

[RuberDuck]

Heres the flash instructions I found:

Flashing the Receiver. Maxdigital XP1000
***8211; Fully power the receiver down via the rocker switch at the rear of the receiver.
***8211; Insert the USB stick containing the image files into the rear USB port on the receiver.
***8211; Power the receiver on from the rear rocker switch
***8211; Wait for both the RED Recording LED and the LED on the front standby button to appear
RED, once you see this you must press the CH+ located behind the flap on the front of the
receiver to initiate the flashing process.
***8211; Wait for the image to flash, during this time the Standby button LED will appear purple to
indicate that the image is being flashed.
***8211; When the flashing process has completed the receiver will automatically reboot.


if your going to copy something from a legally copyrighted document the bare minimum you can do is to quote the author of that document.

[pl1976]

here is what they sent its build 600 which is quite old but it got the box working again, they told me they will send me latest build and also openpli 4.0 tomorrow , you should send them message and also about not getting full memory

QQMail - File Hub (http://en.mail.qq.com/cgi-bin/ftnExs_download?k=0e653339ed8695cb8e44c93942660419 005d010c525204011d545001564b020e56011e005c55551b01 5151080150000e05525108646f364e405403095448014c3058&t=exs_ftn_download&code=0e39df66)

if anyone got there box can they make a backup of openpli 4.0 which was pre loaded, i was in a rush to try vix and never bothered backing up what was already on it :(

Is that the image we have to load onto the box m8. Could anybody put something in the sticky for a tut

[bighun]

yes that is it but i can`t get it to download

[lombard]

Is that the image we have to load onto the box m8. Could anybody put something in the sticky for a tut

just download from that link and flash as normal, there is instructions above your post, its a waste of time really as its vix 3.0 build 600 and i find its abit old, waiting for them to send me updated image or someone here make a backup of openpli 4.0 which i think was pre loaded with it, i should have made a backup,

and send Air a message about this as not too impressed with this box so far

[RuberDuck]

This is the full flashing tutorial for the original xp1000 receivers.



p.s while this tutorial is a ViX tutorial ViX do not offer any support for the icloud2 box.

[lombard]

here is another link , its vix 3.0 build 600 , after flashing do a factory reset , i aint bothered setting up the image with this, waiting for newer build or openpl 4.0

https://hotfile.com/dl/254544252/f04ba04/xp1000.7z.html

[protexblue]

here is another link , its vix 3.0 build 600 , after flashing do a factory reset , i aint bothered setting up the image with this, waiting for newer build or openpl 4.0

https://hotfile.com/dl/254544252/f04ba04/xp1000.7z.html



Why not try direct from OpenPLi website
http://downloads.pli-images.org/builds/xp1000/OpenPLi-4.0-beta-xp1000-20131111_usb.zip

[lombard]

Why not try direct from OpenPLi website
http://downloads.pli-images.org/builds/xp1000/OpenPLi-4.0-beta-xp1000-20131111_usb.zip

if you looked at my earlier posts i have already tried and they dont work

[protexblue]

if you looked at my earlier posts i have already tried and they dont work

I read your posts. You said it came with openpli 4.0 which you didn't back up. You then said you had tried openpli 3.0. So I presume you've tried openpli 4.0 as well then? If so it doesn't look good if you are having to rely on the seller to patch openpli builds.

[pl1976]

I've just plugged mine in powered on at the back and dead looks like box goosed


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[digicon]

I think it would be prudent for one of the members on here if they own this receiver to firstly find out the Build of the current loaded OpenPLI 4.0 image from the information page and secondly to download one of the backup plugins from the download servers and do a full backup of the image as is.

Then at least some of you can go back and re-load original OpenPLI 4.0 in case you encounter any problems as we are all witnessing at this present time

[lombard]

I've just plugged mine in powered on at the back and dead looks like box goosed


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

Hi, is that first time plugging in ? or after trying to flash ? also the adapter red led on ?

Thanks

[pl1976]

Just first time plugging in not attempted flash yet. Red light on adapter


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[lombard]

I think it would be prudent for one of the members on here if they own this receiver to firstly find out the Build of the current loaded OpenPLI 4.0 image from the information page and secondly to download one of the backup plugins from the download servers and do a full backup of the image as is.

Then at least some of you can go back and re-load original OpenPLI 4.0 in case you encounter any problems as we are all witnessing at this present time

spot on, i should have made a backup before trying to flash, she did say will send me link to openpli 4.0 tomorrow and new vix 3.0 build, even the oldest openpli 4.0 don't work, so makes me believe they are patching them

[RuberDuck]

maybe some of you are not aware as these are based on the xp1000 but you can buy the original unit for ?129 in the uk ( ?124 in places ) with free shipping and full warranty and no messing with clone patched images.

[lombard]

Just first time plugging in not attempted flash yet. Red light on adapter


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

doesnt look great, even with bad flash, still get led on front and get bootscreen, try another adapter ? its 3amp output

[RuberDuck]

spot on, i should have made a backup before trying to flash, she did say will send me link to openpli 4.0 tomorrow and new vix 3.0 build, even the oldest openpli 4.0 don't work, so makes me believe they are patching them

They have to be, the originals contain a security board for this very reason.

[pl1976]

Looks as if adapter ok is yours red light aswell ?


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[pl1976]

Only got a 3.42A adapter from a laptop


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[pl1976]

Is this how other guys boxes look like at front can't see how it would show up numbers etc? My open box has thathttp://img.tapatalk.com/d/13/11/12/e4etyru3.jpg


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[SGTFlipFlop]

I think it would be prudent for one of the members on here if they own this receiver to firstly find out the Build of the current loaded OpenPLI 4.0 image from the information page and secondly to download one of the backup plugins from the download servers and do a full backup of the image as is.

Then at least some of you can go back and re-load original OpenPLI 4.0 in case you encounter any problems as we are all witnessing at this present time

Will do when I get home from night shift

Sent from my HTC One now Free ('http://tapatalk.com/m?id=10')

[flemillas]

I'm waiting for my box .... so I'm reading, I should not expect anything good ..... what a shame!


Can you say something about working with the factory image that brings.


thanks

[tkm18]

Messing about with a mates box the now, he wiped the image trying to install vix, cant say im overly impressed with the build quality.

Installed VIX but done the online update and it wiped it. lol

[pl1976]

doesnt look great, even with bad flash, still get led on front and get bootscreen, try another adapter ? its 3amp output

Just tried wiggling the end off adapter seems its a loose connection

[djrikstar]

Anyone got link to a working vix image

[pl1976]

Be good if we could get a tut for this am button bashing here :-/

[lombard]

Will do when I get home from night shift

Sent from my HTC One now Free ('http://tapatalk.com/m?id=10')

that would be great, i should have done it before starting to play with it, just have left box to the side now, and wait for openpli 4.0, aint impressed with this box, firstly i dont think its 600mhz as advertised , its 501mhz i think, also what memory RAM ? Flash ? actually inside these ? even if as advertised, wont the images need modifying to get that space ? ,

[lombard]

Be good if we could get a tut for this am button bashing here :-/

mate the information is all here just need to read past posts here, if you not flashed it leave it alone, as its probably got openpli 4.0 already and rather keep that , there is noting else

this one works vix 3.0 build 600 , which is the only one i got up and running , after trying other images and not booting up, aint gonna bother adding plugins etc as its old build, rather have openpli 4.0
https://hotfile.com/dl/254544252/f04ba04/xp1000.7z.html

instructions how to flash

[tkm18]

Ive got the vix image going, epg and picons in the flash, seems ok.

Takes rats updaters ok, Ondemand, but wont install tsmedia, * check_data_file_clashes: Package tsmedia etc etc... wants to install file /usr/lib/librtmp.so.0, but that file is already provided by package * librtmp0.

Other than that, fairly straight forward.

[pl1976]

mate the information is all here just need to read past posts here, if you not flashed it leave it alone, as its probably got openpli 4.0 already and rather keep that , there is noting else

this one works vix 3.0 build 600 , which is the only one i got up and running , after trying other images and not booting up, aint gonna bother adding plugins etc as its old build, rather have openpli 4.0
https://hotfile.com/dl/254544252/f04ba04/xp1000.7z.html

instructions how to flash

A think I've knacked mine tried to do an update and box stuck on two red lights one on left is highlighted blue. I did manage to get channel lists downloaded before but could get a picture

[lombard]

Ive got the vix image going, epg and picons in the flash, seems ok.

Takes rats updaters ok, Ondemand, but wont install tsmedia, * check_data_file_clashes: Package tsmedia etc etc... wants to install file /usr/lib/librtmp.so.0, but that file is already provided by package * librtmp0.

Other than that, fairly straight forward.

what build ?

[tkm18]

what build ?

The one you posted, 600.

[lombard]

The one you posted, 600.

aint bothered setting that up, waste of time i think, rather wait for newer build or stick on openpli 4.0 just waiting for that, vu solo clone is better then this lol

[tkm18]

aint bothered setting that up, waste of time i think, rather wait for newer build or stick on openpli 4.0 just waiting for that, vu solo clone is better then this lol

Aye, but until some one decides not to wipe the factory image or mod the existing images out there, theres not much else to do with it.

Like i said, seems to be running ok, got tsmedia running now, just installed tspanel and installed from that.

For the money it aint all that bad so far lol

[pl1976]

Aye, but until some one decides not to wipe the factory image or mod the existing images out there, theres not much else to do with it.

Like i said, seems to be running ok, got tsmedia running now, just installed tspanel and installed from that.

For the money it aint all that bad so far lol

Where do you get the plug ins m8. Does it have icefilms etc iptv

[djrikstar]

Anyone know how to ftp into it i have factory reset it but still not taking the password "password" or a blank password its on factory openpli 4.0

[mezzyg]

Anyone confirm. The available ram and memory.

Menu, system, info

Sent from my SM-N9005 using Tapatalk 2

[steviestring]

Back of box 256mb nand flash 512 mb ram two usb ports but only 1 on box.....

[djrikstar]

Ok fixed had to change the passwd folder to reset password

[digicon]

Is this how other guys boxes look like at front can't see how it would show up numbers etc? My open box has thathttp://img.tapatalk.com/d/13/11/12/e4etyru3.jpg


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)


They dont have a display as such just 2 lights exactly the same as the receiver it is copied from the XP1000.

If anyone had spent an extra ?50 they could have got as RD says an original Octagon version with numbered display.

As with anything its early days yet most of you have only just got these receivers so it will take time before anyone finds a solid image that works with everything

[pl1976]

Can someone please tell me how to put plugins on & how to enter a n'cmd


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[lombard]

not impressed with this at all lol, on box it says 256mb flash , 512mb ram, now waiting for them to give me link to openpli 4.0 or newer build of vix 3.0, just send them a message and say not too pleased might make them try to sort it faster

[tkm18]

What were folk expecting for ?45. lol

Seems to be running fine on the 600 vix build, wont be holding my breathe for that getting a quick update.

[blazeff]

just to help with telnet login:
login: root
password: xp1000

[lombard]

What were folk expecting for ?45. lol

Seems to be running fine on the 600 vix build, wont be holding my breathe for that getting a quick update.

it worked out ?71 for me

[lombard]

just to help with telnet login:
login: root
password: xp1000
Also here is a link with OpenPli 4.0 - QQ??????????? (http://mail.qq.com/cgi-bin/ftnExs_download?k=0c623539e7e3b5c58c43cf3940360a17 045b075b02070c081f00560d051b0c00045318585f530b1553 0301085f0f5e0904040c0f663f38404253050956180f42325f&t=exs_ftn_download&code=2b59f688)

nice one will try this later when i get back and set it up with preferred plugins, thanks

[pl1976]

Yep have to agree with the build though my cable knacked have to bend it at the end to get it to connect so will need a new adapter and the flap at the front keeps falling down


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[pl1976]

Openbox & skybox same price & are better


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[lombard]

Openbox & skybox same price & are better


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

mate they are closed sourced boxes with no options to install plugins, no 7 day epg etc basic as can get, have you ever had a enigma 2 box setup ? its miles ahead of openbox/skybox these are basic so easy to work, enigma 2 need to know what to do but setup is much better, and layout etc

[pl1976]

mate they are closed sourced boxes with no options to install plugins, no 7 day epg etc basic as can get, have you ever had a enigma 2 box setup ? its miles ahead of openbox/skybox these are basic so easy to work, enigma 2 need to know what to do but setup is much better, and layout etc

Probably once a get the hang off it will be good


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[muslico]

hi m8,
could someone try ti from telnet please, just to know what about cpu info...

cat /proc/cpuinfo

Thanks !

[blazeff]

hi m8,
could someone try ti from telnet please, just to know what about cpu info...


Thanks !

root@xp1000:~# cat /proc/cpuinfo
system type : BCM7358A1 STB platform
processor : 0
cpu model : Broadcom BMIPS3300 V3.2
BogoMIPS : 497.66
cpu MHz : 501.000
wait instruction : yes
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : yes
hardware watchpoint : no
isa : mips1 mips2 mips32r1
ASEs implemented : mips16
shadow register sets : 1
kscratch registers : 0
core : 0
VCED exceptions : not available
VCEI exceptions : not available

[bighun]

i have just had an email from lily airsat and she says they are using patched images on the boxes and they will give me a link for the latest vix and openpli

[muslico]

i have just had an email from lily airsat and she says they are using patched images on the boxes and they will give me a link for the latest vix and openpli
thanks dude,

please let us know when u recive images patched lnk.

Could you now try it on telnet ?


cat /proc/meminfo

free

df

thanks

[blazeff]

thanks dude,

please let us know when u recive images patched lnk.

Could you now try it on telnet ?

thanks

root@xp1000:~# cat /proc/meminfo
MemTotal: 236108 kB
MemFree: 131672 kB
Buffers: 0 kB
Cached: 44012 kB
SwapCached: 0 kB
Active: 55192 kB
Inactive: 21456 kB
Active(anon): 32748 kB
Inactive(anon): 144 kB
Active(file): 22444 kB
Inactive(file): 21312 kB
Unevictable: 0 kB
Mlocked: 0 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 4 kB
Writeback: 0 kB
AnonPages: 32644 kB
Mapped: 13704 kB
Shmem: 256 kB
Slab: 8924 kB
SReclaimable: 3756 kB
SUnreclaim: 5168 kB
KernelStack: 536 kB
PageTables: 428 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 118052 kB
Committed_AS: 59084 kB
VmallocTotal: 1034164 kB
VmallocUsed: 540652 kB
VmallocChunk: 463048 kB

root@xp1000:~# free
total used free shared buffers
Mem: 236108 104844 131264 0 0
-/+ buffers: 104844 131264
Swap: 0 0 0


root@xp1000:~# df
Filesystem 1K-blocks Used Available Use% Mounted on
ubi0:rootfs 107228 48332 58896 45% /
devtmpfs 117936 4 117932 0% /dev
tmpfs 64 0 64 0% /media
tmpfs 118052 252 117800 0% /var/volatile

[pl1976]

i have just had an email from lily airsat and she says they are using patched images on the boxes and they will give me a link for the latest vix and openpli

I just got the email now


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[SGTFlipFlop]

Tried making a backup image when I got home from work and it didn't work, was too tired so shot of to bed, will try again now

[pl1976]

Lily has forwarded me openvix 4.0 & how to get iptv working


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[flemillas]

Lily has forwarded me openvix 4.0 & how to get iptv working


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)


Can you say anything about this? explain anymore....please!!!!!

[pl1976]

Can you say anything about this? explain anymore....please!!!!!

Still to put it on mine will do it tonight


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[muslico]

Lily has forwarded me openvix 4.0 & how to get iptv working
could you upload it and explain how to get iptv ?
thanks

[RuberDuck]

Lily has forwarded me openvix 4.0 & how to get iptv working


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

There is no openvix 4.0, there is a openvix 4.2 but we have not released that and it's not in the public git so no one outside of ViX can build it either.

[bighun]

pl1976 you will get iptv on tsmedia just get the ipk file and install it

[rigsby71]

just to help with telnet login:
login: root
password: xp1000

how strange, i just opened a new box , set it up, & just took a wild stab in the dark with passord of xp1000 & it worked, i hadn't seen your post either , until now.

[lombard]

Hi all, i have flashed the openpli 4.0 someone kindly uploaded on here, and have set it up, cccam, mgcamd, latest channel list, and autobouquets plugin, Tsmedia, and gets full 7 day epg, will make a backup of it, anyone know how to take off the password for FTP, as its now set as xp1000, rather have no password

Thanks

[digicon]

Hi all, i have flashed the openpli 4.0 someone kindly uploaded on here, and have set it up, cccam, mgcamd, latest channel list, and autobouquets plugin, Tsmedia, and gets full 7 day epg, will make a backup of it, anyone know how to take off the password for FTP, as its now set as xp1000, rather have no password

Thanks


If you do make a full backup of the image and want to Upload it here for other members please do so by using an external file sharing site as any images with Cams/Roms included will be deleted, Just to let you know.

[pl1976]

Hi all, i have flashed the openpli 4.0 someone kindly uploaded on here, and have set it up, cccam, mgcamd, latest channel list, and autobouquets plugin, Tsmedia, and gets full 7 day epg, will make a backup of it, anyone know how to take off the password for FTP, as its now set as xp1000, rather have no password

Thanks

Excellent m8 a was cracking up earlier trying to get it all. Look forward to getting it


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[lombard]

If you do make a full backup of the image and want to Upload it here for other members please do so by using an external file sharing site as any images with Cams/Roms included will be deleted, Just to let you know.

Hi, no problem, if not allowed wont upload it, if can give link to external link to download that ok ?

ok so i got most of it running, and working

cccam / mgcamd
Tsmedia
Picons logos
Rats picon updater
Rats channel update
autobouquet

only thing i cant seem to get epgimport working , on my vu solo i have epgimport working with rytec_uk source and works saving on internal flash for 7 day epg , it works fine downloads all completes , but get no epg ? just when everything else went without a glitch ! anyone ?

[mezzyg]

What's the remote like guys.

Sent from my SM-N9005 using Tapatalk 2

[pl1976]

What's the remote like guys.

Sent from my SM-N9005 using Tapatalk 2

Seems fine m8 pretty responsive


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[lombard]

Hi, cant seem to get EPGimport working using rytec_uk as source , it downloads and completes but get no epg, so i used crossepg using opentv, i know soppoused to use usb as stoarge but seems to worked and its on internal flash, this is what memory im using, and image is fully loaded now, not quite sure what to make of it , if anyone confirm used and free space , thanks

total used free shared buffers
Mem: 236108 112644 123464 0 0
-/+ buffers: 112644 123464
Swap: 0 0 0
root@xp1000:~# df
Filesystem 1K-blocks Used Available Use% Mounted on
ubi0:rootfs 107228 83488 2374

[pl1976]

Hi, cant seem to get EPGimport working using rytec_uk as source , it downloads and completes but get no epg, so i used crossepg using opentv, i know soppoused to use usb as stoarge but seems to worked and its on internal flash, this is what memory im using, and image is fully loaded now, not quite sure what to make of it , if anyone confirm used and free space , thanks

total used free shared buffers
Mem: 236108 112644 123464 0 0
-/+ buffers: 112644 123464
Swap: 0 0 0
root@xp1000:~# df
Filesystem 1K-blocks Used Available Use% Mounted on
ubi0:rootfs 107228 83488 2374

Are you uploading it Lombard? Can it be done by USB or FTP


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[lombard]

Are you uploading it Lombard? Can it be done by USB or FTP


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

here is backup i made with openpli 4.0 , you flash by usb as mentioned earlier in this thread
Openpli 4.0 Lombard Backup Ibox 2 12.11.13.rar (http://www.megafileupload.com/en/file/468289/Openpli-4-0-Lombard-Backup-Ibox-2-12-11-13-rar.html)

one weird thing i noticed , when say on bbc 1, when in channel list, highlight bbc 1 same channel your on and the screen will blur , also display is set for 1080i, can change this to 1080p after, as some people dont have 1080p so safer to save with 1080i to work on 720p tvs

i currently have epg working from cross epg , using opentv, saved to internal flash , cant seem to get epgimport to work,

also if anyone can get newer build of vix 3.0 that would be great

Thanks