PDA

View Full Version : navara airbag 28556 EA10C


cricstudio
7th October, 2013, 09:51 PM
hello
i need your help because i have to fix airbag ecu of
nissan navara with error -replace ecu.
eprom is moto 912b32 and ecu is 0285001734 28556EA10C

ANY HELP APPRECIATE!
attach ori file with internal error:

thank you in advance
elektraauto
8th October, 2013, 06:34 AM
Hello, its your file cleared and my 100% working.
cricstudio
10th October, 2013, 11:30 PM
THANK YOU ,IT WORKS
megabits
12th August, 2019, 04:59 PM
hello
i need your help because i have to fix airbag ecu of
nissan navara with error -replace ecu.
eprom is moto 912b32 and ecu is 0285001734 28556EA10C

ANY HELP APPRECIATE!
attach ori file with internal error:

thank you in advance

Do you have pinouts for this airbag board?
BusCan
16th January, 2020, 07:28 PM
Hi
If it helps a person
0285001734 Nissan Navara
See you soon
Jexus86
6th February, 2020, 01:45 AM
Hi
If it helps a person
0285001734 Nissan Navara
See you soon


BusCan, your pinout is good, but with a little important change, VDD and VSS are in wrong position, must be swap one with the other, like next picture
Regards
BusCan
6th February, 2020, 04:02 PM
BusCan, your pinout is good, but with a little important change, VDD and VSS are in wrong position, must be swap one with the other, like next picture
Regards
Hi
You're wrong my friend I wired Carprog and read OK
You must have been wrong !!
Please recheck
Good luck
sebage
6th February, 2020, 04:09 PM
You are both right! Only the pictures show the wires on different components! If you follow the routes carefully, everything is ok in both pictures.
Jexus86
6th February, 2020, 07:37 PM
Hi
You're wrong my friend I wired Carprog and read OK
You must have been wrong !!
Please recheck
Good luck

in your last photo you are in other capacitor BusCan, this last is good pinout like sebage say, recheck your first photo BusCan, i dont wanna make a war about this, i was only trying help others members, to they wont make a mistake in the future. BusCan sorry if I offended you, wasnt my intention. All we are here to help and be helped.
Regards
BusCan
6th February, 2020, 08:34 PM
in your last photo you are in other capacitor BusCan, this last is good pinout like sebage say, recheck your first photo BusCan, i dont wanna make a war about this, i was only trying help others members, to they wont make a mistake in the future. BusCan sorry if I offended you, wasnt my intention. All we are here to help and be helped.
Regards
Yes exact i just realized my mistake
Thank you for checking out I'm sorry I'm wrong on the photo I put on the wrong capacitor
Or la la la .....
All my excuses