PDA

View Full Version : Sharan IMMO-OFF



juniormaxxx
9th October, 2013, 09:37 AM
Hello everybody,

I have issue with sharan 1998 1.9 TDI
Inside was ECU 0 281 001 251/252 BOSCH

Inside I found two B58323 - 93c46, on this forum I found that I need to read LEFT eprom near quartz and this is his dump 223618 , is this dump ok, can somone make me immo-off, the immo-box died and theres no money for new ecu, box and keys, car is down for 5 days now.

Thank you for consideration

juniormaxxx
10th October, 2013, 09:57 AM
anyone any idea......

olmar
10th October, 2013, 10:49 AM
Hello everybody,

I have issue with sharan 1998 1.9 TDI
Inside was ECU 0 281 001 251/252 BOSCH

Inside I found two B58323 - 93c46, on this forum I found that I need to read LEFT eprom near quartz and this is his dump 223618 , is this dump ok, can somone make me immo-off, the immo-box died and theres no money for new ecu, box and keys, car is down for 5 days now.

Thank you for consideration
try this...

Mr BLACK
10th October, 2013, 11:35 AM
can you give me the pass to see what is changed in your dump...

juniormaxxx
10th October, 2013, 02:01 PM
I tried, I write your dump in left eprom and still car starts but dies after 1 second.
any other ideas, do I need to write your dump in both eprom-s.

sepistar
10th October, 2013, 02:34 PM
here you go mate.pass pm.
223862223862

br.

snatchme
11th October, 2013, 01:30 AM
Or check here 100% working..

http://www.digital-kaos.co.uk/forums/f178/vw-sharan-1998-a-360754/#post2060431

yugo45
11th October, 2013, 11:40 AM
You need to read other chip , this chip does not contain Immo data.
Also after immo off you must disconnect Immo box to be able to have Immo off working.

juniormaxxx
14th October, 2013, 02:28 PM
ok this is the other chip one near flat cable 224580 so this is B58323 near the flat cable. Can this be helpfull

sepistar
14th October, 2013, 02:58 PM
car are not working either with the second dump?
br.

yugo45
14th October, 2013, 10:05 PM
Here you go
You have to disconnect immo box before you write this in ECU.

juniormaxxx
18th October, 2013, 06:45 AM
Morning guys, I have tried all but couldnt get the car started, that car made me crazy......

Thank you guys for helping me I appreciate it much.

sepistar
18th October, 2013, 07:27 AM
did you make diagnosis on that car?maybe ecu faulty or ecu are not feed by power.check relay 109 under steering.
br.

yugo45
18th October, 2013, 10:35 AM
Morning guys, I have tried all but couldnt get the car started, that car made me crazy......

Thank you guys for helping me I appreciate it much.
Does it car start and die after 2 sec, or car dose not start at all?

Evaldazj
17th December, 2013, 04:58 PM
car start's and then stops. Tried all solution posted here, none work. Starting one time, and that's it. Read eeprom and it's content changed every time.

Evaldazj
19th December, 2013, 05:32 PM
problem solved with emulator...

kire106ka
20th December, 2013, 01:01 AM
You forgot to disconect immo box that's why eprom recodes

Evaldazj
20th December, 2013, 07:23 AM
box was disconnected at first try.

kire106ka
20th December, 2013, 04:40 PM
i have made a lot of it never recodes eprom
ok you solved byt you don't need emulator anyway glad you fix it