Mercedes Vito start error

[AdamDavidSzocs]

Hi folks!

I made key to a Mercedes Vito. Key is okay, though, I have a start erro porblem.

Can anyone please deal with this? Many thanks

Adam

223624

[antwnhszr]

read again the eeprom from ecu.....what manufacter is? the logo under the chip is: F?

[antwnhszr]

what mcu has in the immobox?
regard's

[AdamDavidSzocs]

Immo MCU is J66D HC08AZ32.

ECU is BOSCH 0281 011 067

[antwnhszr]

[QUOTE=AdamDavidSzocs;2113339]Immo MCU is J66D HC08AZ32.

ECU is BOSCH 0281 011 067
start your car my friend.
regard's

[Mr BLACK]

i have the same problem vith a mercedes sprinter ecu eeprom st95p08 and immo is not with hc08 mcu ... is enough to clear only eeprom from ecu

[antwnhszr]

read the eeprom from ecu and the mcu from immo , posted here and i can help you m8
regard's

[Mr BLACK]

i don't know how to read mcu ...what mcu is ? and what you say about this : http://www.digital-kaos.co.uk/forums/downloads/car-dumps-database/34/mercedes-immo-calculator-2748/

[AdamDavidSzocs]

Will try this, many thanks

adam

[antwnhszr]

i don't know how to read mcu ...what mcu is ? and what you say about this : Mercedes IMMO calculator - Downloads - Digital Kaos (http://www.digital-kaos.co.uk/forums/downloads/car-dumps-database/34/mercedes-immo-calculator-2748/)
MC68HC08AZ32.read with upa or xrog-m.....i hope to do you have some off this programmer.

[Mr BLACK]

i have upa ...but where you see MC68HC08AZ32 in picture above

[Mr BLACK]

immo box is temic 0265451732

[AdamDavidSzocs]

Hi guys!

So I tried these dumps with no success.

Also ran thru original dump with Mercedes Start error software, but didn't work.

Also did them with immokiller, but no joy.

What to do?

Thanks

Adam

[dashtec]

use immo emulator cr2 cut can wire from wsp edit ecu eep job done

[Mr BLACK]

you do something wrong ...in my case it worked from first try

[eliasole]

I have same problem with vito 108.
Tried repair with start error soft , it worked for one day and then it stops.
Tried with immo emmu julie worked but ventilators worked all time.
I attach original reads from 5 plug ecu and temic .
Any help will be appreciate.

[kovacsgergo2]

Hi

i have a start error problem with a mercedes vito

[eepromRipper]

where are the dumps?

[kovacsgergo2]

from ecu 0281010428 a6111530679

[kovacsgergo2]

280076 hc 08 ori1