HOW TO READ VW gol 1996 WITH UPA?

[claudio35]

request your assistance, I have no experience in vw, you guys can explain me as with upa? memory inside? thanks

[stefaudio]

Hi bro Claudio,the LCD dysplays are solderet wit metal pins on board,you have to desolder pins with yron and vacum pump and remouve plastik.The eeprom is on other site of board is 93c56 near processor.

[stefaudio]

Or you can cut this pice of aluminium like in the pictuer and eeprom is down there,you can desolder with hot air station

[fuktak]

With 3 wires and ms dos program motometer.exe.Look picture

[sepistar]

With 3 wires and ms dos program motometer.exe.Look picture

exactly how i did few years ago.
br.

[claudio35]

Thank you, Cut, desolder the chip, but I read only "0", please anyone have a dump, to try a new chip, have immo?

[sepistar]

clean very good eprom legs,and read again.there are no immo inside.
br.

[claudio35]

clean very good eprom legs,and read again.there are no immo inside.
br.

Solder the chip back, unmodified, and only stripes ...not working ---- Error, I need a dump, no immo, the vehicle starts, please dump.

Dsh: 1h0.919.960.j

sw 5.1 layout 1.0

[claudio35]

I finally read (Clean the adapter soic8), can calculate for me, I have: 286529km need 49000 km

Thanks to all

[yugo45]

Here you go...

[claudio35]

Here you go...

Thanks, this solved your dump 100% ok