View Full Version : E39 BMW DME 7 ECU swap
rrador
23rd October, 2013, 04:23 PM
I swapped 29f400 flash from old to new ecu but car is not starting and no comunication with ecu
Is swaping flash enough on these or do I need to do anything else?
thanks,
aslamaslam
23rd October, 2013, 08:41 PM
test your weire
artek_was
23rd October, 2013, 09:20 PM
only flash
AlexandruP
23rd October, 2013, 09:26 PM
EEPROM if there is one...
rrador
23rd October, 2013, 10:13 PM
Wiring is fine, I had the ecu in the car before worked on it and I could comunicate with it.
Ok so if there is eeprom there i should swap both eeprom and flash? i wil ldouble check right now and recheck my soldering
AlexandruP
23rd October, 2013, 10:47 PM
Yes if there is one.
gccb
23rd October, 2013, 10:48 PM
resolder your falsh sure bad contact
rrador
24th October, 2013, 02:55 PM
thanks for the help guys, I resoldered my flash and found sp08 eeprom so swapped that too and car started.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.