PDA

View Full Version : Digiprog T5 2013 color screen



drpeter
29th October, 2013, 06:48 PM
Hi folks, I tried a T5 2013 color TFT with digiprog menu golf6 color. I could login the dash, but the value on my digy screen was slowly counting (versuch 1,2,3,4, etc...). There was no progress bar like the A4? Is this normal? If yes how long does it take before it can read the old km? I waited 33 minutes still no joy. Thanks. I interupted because i didn't trusted it anymore.

exe123
29th October, 2013, 06:59 PM
2013 color not covered by Digiprog yet! (4.92)

drpeter
29th October, 2013, 07:39 PM
2013 color not covered by Digiprog yet! (4.92) I tried with one of the latest VW :
2013- DIAG 2013 VAG is supported but not all versions. I could login, the counter is going up slowly (versuch - trying), question is that normal?

Tachodiag
29th October, 2013, 07:57 PM
Here comes the new obd tools era.
The profi ones not clones

PremierD
29th October, 2013, 08:07 PM
Ok ... if you say so mate ... lol

rukartinatv
29th October, 2013, 08:08 PM
Yes its normal i did vw jetta 2013 v4.88
its read the dash like 3-5 min you see on the digiprog screen
like try 1 2 3 4 then something like 1E 2B 3C 4B 3B 3A .........
dash go black after its login the dash
its back to normal then you can wright new km
of course if its read right km.
Thank you

drpeter
29th October, 2013, 08:15 PM
Yes its normal i did vw jetta 2013 v4.88
its read the dash like 3-5 min you see on the digiprog screen
like try 1 2 3 4 then something like 1E 2B 3C 4B 3B 3A .........
dash go black after its login the dash
its back to normal then you can wright new km
of course if its read right km.
Thank you This one read the dash version , soft no., display went black, dash powered up again and digy started counting very slow, not like the old vdo nec-64, fast and read the value. I waited 33 minutes and still nothing (didn't saw the original value) I will try again before buying any updates. Thanks.

rukartinatv
29th October, 2013, 09:31 PM
I did two vw 2013 its read maximum
3-5 min.
then its show right km.
what version v4.88?

rukartinatv
29th October, 2013, 09:33 PM
I try with dp3 vw jetta 2013 didnt work.
digiprog did with out the problem:)

exe123
29th October, 2013, 11:48 PM
2013 non color is working without any problems with Digiprog.
Every color dash after 06/2012 fails. It will count forever.
4.92 original

PremierD
29th October, 2013, 11:54 PM
and 4.88 ? or 4.92? ...:)

TULGEYWOODMAN
30th October, 2013, 12:16 AM
2013 colour screen T5 is sw 0504.............NOBODY BUT NOBODY, not even santa ******* clause, can do it.

exe123
30th October, 2013, 12:55 AM
and 4.88 ? or 4.92? ...:)

Tested with 4.88 4.90 4.91 and 4.92 ;)
Color dashs after 06/2012 are working with none of them

rukartinatv
30th October, 2013, 02:38 AM
Was tft not color

potatodog
30th October, 2013, 02:52 PM
2013 colour screen T5 is sw 0504.............NOBODY BUT NOBODY, not even santa ******* clause, can do it.
AVDI and XCan do this tft dash

drpeter
31st October, 2013, 08:41 AM
2013 colour screen T5 is sw 0504.............NOBODY BUT NOBODY, not even santa ******* clause, can do it. Hmmm and what about smok? Yesterday tried with Smok (member Gijsvm) had option VW TFT 2012- enabled, didn't worked (write failed), we skyped smok, he found a bug in his soft yesterday evening late, so there is a update now, I picked up the tool this morning and now it is working perfect. Had to do this car because is good customer.

cokolo
31st October, 2013, 08:55 AM
AVDI and XCan do this tft dash

AVDI can do it , I've worked a few weeks ago 5/2013 2min. job

C2PAC59
2nd January, 2014, 10:08 PM
Hello, or can one find xcan?? I do not find a Web site.... thank's

markony79
2nd January, 2014, 10:26 PM
Carprog work on this car...1 minut max
Dp3 elprosys...not shore...i was try , wait 15, 20 min...unknow version ( 2 mouths ago)

potatodog
3rd January, 2014, 01:12 PM
Hmmm and what about smok? Yesterday tried with Smok (member Gijsvm) had option VW TFT 2012- enabled, didn't worked (write failed), we skyped smok, he found a bug in his soft yesterday evening late, so there is a update now, I picked up the tool this morning and now it is working perfect. Had to do this car because is good customer.

Xcan have a lot of bugs. Wrong PIN on all UDS dash, Prepare EE at UDS after 06/2012.....
Many months ago, I gave him the solutions shown but not changed

sparkz02
3rd January, 2014, 02:57 PM
smelecom is always ahead on VAG's I'm guessing that can do it.

rukartinatv
3rd January, 2014, 05:23 PM
Smelecom work on all Vag include nec 35xx
2014

TULGEYWOODMAN
3rd January, 2014, 05:50 PM
smelecom is always ahead on VAG's I'm guessing that can do it.

Well nobody from smelecom has told me!
I bought the update at the time [see my post]

javyb
3rd January, 2014, 06:40 PM
Well nobody from smelecom has told me!
I bought the update at the time [see my post]

Eric if u get another colour screen one try smelcom as they got a habit of adding software versions but not telling customers

TULGEYWOODMAN
3rd January, 2014, 08:11 PM
Eric if u get another colour screen one try smelcom as they got a habit of adding software versions but not telling customers

Well I paid 600 quid to smelecom for update for both T5 2013 and colour transporter 2012 ,only to be told by smelecom china when it wouldnt work, that it was unknown version..................

I havent had a COLOUR screen caravelle to do since!


Elprosys managed to zero both clusters after I sent them with keys to Poland, but still cant do them.......................................

autofan1965
3rd January, 2014, 11:22 PM
What you mean with preparation? PIN is not relevant at this dashes.

TULGEYWOODMAN
4th January, 2014, 10:33 AM
What you mean with preparation? PIN is not relevant at this dashes.

Really???????????

autofan1965
4th January, 2014, 12:57 PM
Preparation work for me ok. PIN for someone with littel knowledge and access to SecurityBlock is more as not relevant.