How TO swop IAW59F.M3 TO IAW5AF.P3

[rallyarek]

HI SOMEBODY HELP ME ABOUT TRANSFORM ECU FIAT PUNTO FROM IAW5F.M3 TO IAW5AF.P3 I KNOW IS PISSIBLE ONLY HW303, SOME ONE HAVE ANY INFO BE GREAT.I USE CDC MARELLI AND IAW DECODER .BUT WHEN I CHANGE AFTER WRITE EPROM ECU NOT REGOGNISE.

[aslamaslam]

is diferant ecu

[raptors]

My friend do not worry. Galletto 1260 boot point and insertion of software IAW59F M3 him back to life. If you try to drive so it will probably work, but you will not be able to communicate with you to make it, and to wipe his mistakes he had memorized.

[volo699]

It works, just did it.

[filaalfa28]

It works, just did it.

Hi volo699 how do you have done that ? with what tool ? could you explain please? Best regards

[immokill]

It works, just did it.

bravo mate can you explain i need to swap 59f to 5af p4. I have decoder
can you rxplain how you did it?

regards

[henal]

Hi,

I need the P4 Full boot mode Files Please,

I can Provide the Full P3 Files

[volorucinski]

59f flash and eeprom can be written on 5af ecus. No problemo! Buuut, the ecu will not work on the car. The instrument clusters will not move a mm! The car starts but no clock, idle and camshaft axe issues, maybe sime lambda err, too.
5af files can be written on 59f ecus, will not work on the car, either... when trying to rewrite the old files back, the ecu will not communicate, will throw an err about the different type you want to write or other kinda stuff. Cannot be resseted or it can, if you have the correct tool. But... we have nothing! Our transformation from 59f into 5af is like impossible to have. No iaw decoder, no avdi, no io terminal... nope. There are 2 different platforms.
Eg.: I have transformed a simtec 71.5/71.6 too into a simtec 71.1. all done, no problem! From can into kline and it worked slightly easy. But... different pinout on the ecu circuit board. So... some platforms cannot be modified! Try to modify a 59f or 5af into a 5am... will not work... that is my conclusion

[volorucinski]

Contact me in pm. I have a lot of files from 59f and 5af full flash and eeprom. Just tell me what you need.

[gsmrepair]

It is possible to change iaw59f to iaw5af and vice versa. all you need is the software from same hardware

[henal]

Hi i have the Full BOOT Mode file for IAW5AF.P3 PM me ,

can any one help me i need the Full Boot mode for P4