View Full Version : Peugeout 206 edc16c34 dtc problem
Smac_a
2nd November, 2013, 12:35 PM
Hi everyone,
I'm having problems with a pug. One P1613 keeps apearing randomly and car goes in limp mode.
Otherwise cars runs fine... Can anybody remove the dct P1613?
Thanks in advance,
Smac_a
oem
2nd November, 2013, 02:46 PM
Your dump is wrong. Checksum wrong. Try to find good original and write it. P1613 - Variant coding. It is not correct to remove DTC. I can remove but is not properly
Smac_a
2nd November, 2013, 05:04 PM
Hi.
Checksum in flash you mean or eeprom? Flash should be ok - at least magpro and ecm say so... Ecu was flashed (not by me) loooots of times with diferent flashes. Maybe one of them changed ecu configuration. I know that it should be coded with peugeot planet - but for now it is not really an option. Can someone remove dtc from flash?
Best regards,
Smac_a
oem
2nd November, 2013, 10:49 PM
OLS say checksum wrong.
Smac_a
3rd November, 2013, 12:22 AM
Strange... Car is running...
Regards,
Smac_a
oem
3rd November, 2013, 03:51 PM
What tool you use for read/write?
bmgadam
3rd November, 2013, 07:40 PM
Sometimes WinOLS show 'wrong checksum' but is good. When i make chk via swiftec and later i put file to OLS show me too 'wrong checksum'.
Smac_a
3rd November, 2013, 08:08 PM
For read I used Magpro2.
Can somebody remove p1613? I can repair chksum later if needed, I think that for this ecu Magpro2 can even make it during writing.
Would be grateful. Thanks in advance,
Smac_a
Smac_a
8th November, 2013, 07:47 AM
Just an update... maybe will be of some use to somebody else. Tried manualy erasing P1613 and whole bunch of others. And works like a charm.
No errors - no limp mode.
This is not really an option for the long run as I should only delete one error. Diagnostics for now are only live data - no errors :P
Regards,
Smac_a
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.