Mercedes sprinter start error

[mellon]

Hi, I need help with fix this. I repair this by Sprinter Vito Start Error v1.3 by not working. Please help.
ecu 95p08
immo temic hc908az32 4l52h
I have 2 keys and I checked thay by zedbull (id12)
Adam

[totalkey]

try this file
229630

[Meat-Head]

werid did one the other month do the eeprom in ecu as well

[mellon]

I have not communication with immo temic on car.

[mellon]

Before repair immo motorola I don't have communication too.

[twincam]

Its possible that you have broken immo box

[Meat-Head]

had one last month for another fault not able to talk to immmo box

[DottoreBL]

U need to have 2 wires with 12V on immo box, one allwazs, one on ignition, if u do not have this, allso will show start error


Pin 3 is battery +12V , Red/Yellow WirePin 7 is ignition +12V, Black /Yellow Wire

[mellon]

Ground and both power are good so maybe this immobox are broken. Have I to repair ecu eprom too with mercedes start error program v1.3 or only hc908 in temic module?
Do you have wiring diagram immo to ecu in sprinter 416 2.7cdi?

[twincam]

With starterror 1.3 You need to do Both ecu and immo box .

[mellon]

I am asking because I do it both for the first time in this car and not working so I wrote original file to ecu and change file by start error 1.3 to immo temic and not working too. The power and ground are ok. Files are ok, change in ecu and temic immo. I am stupid.

[keygargoil]

Hi, I need help with fix this. I repair this by Sprinter Vito Start Error v1.3 by not working. Please help.
ecu 95p08
immo temic hc908az32 4l52h
I have 2 keys and I checked thay by zedbull (id12)
Adam

here is your file write immo and ecu 5p08

[mellon]

You are great guy! Works

here is your file write immo and ecu 5p08

[twincam]

It 's Easy Job You did something wrong Before.

[mellon]

No, this files are different as generated by software sprinter v1.3. Car run but I have error in ecu : eprom error and mil ligt

[florinel]

230278 dump files sprinter tested and produces transponder with ded bull

[mellon]

230278 dump files sprinter tested and produces transponder with ded bull

Hi. I write your files, program transponder by effi-zed bull and car don't run with start error message. I read tis file after put this ecu and immo to car and there are big differents! So maybe there is problem with ecu eprom or hc908az32 in temic. I check this files before put in to car. Please help.

[mellon]

The problem is blown fuse no7 under the steering column.