PDA

View Full Version : Delphi DCM3.4 galletto write problem



pelot
14th November, 2013, 05:18 PM
Hi! I can't write renesas ecu Delphi dcm3.4 using galletto3. Read ok. In galletto manual i see support DCm3.4 with Renesas 64F7058 processor, but ecu have R4F70590. I try to write like 7059 but without secsess. May be i must use different resistor for 7059, not 560Ohm? Or i must write 7059 like 7058? OR galetto don't support this type of processor? need some hint... Many thanks!

mislav88
14th November, 2013, 06:24 PM
galletto v53 can r/w this ecu obd

LaraVAG
14th November, 2013, 09:22 PM
In galletto there is other windows to read, other to write, check it,
Piassini do it, if you have

pelot
14th November, 2013, 09:28 PM
Sure? -i see only "Megane 1.5 e3/4 delphi DDCR". its not old ddcr, its dcm3.4 ecu. My G3 is Eu-clone with 2012 soft inc renesas r/w. Maybe you meant Peugeot DCM3.4, like 407 2.0HDI?

yes, for "write" i select other menu.

LaraVAG
14th November, 2013, 09:37 PM
In piassini you have left menu and must select sh7059

pelot
14th November, 2013, 09:40 PM
In piassini you have left menu and must select sh7059 i don't have piasini