U0427 car don't start after crash

[LaraVAG]

Hello, anyone have idea how disable this dtc in eprom in fiat fiorino 1.3MJD?
After crash, car dont start, only one dtc U0427
Airbag clean.

[morgano]

Diagnostic Trouble Code (DTC) U0427 Definition (http://www.aboutautomobile.com/DTC/U0427)

I think no way to "disable" to make the car start. Look why comms with security module is not working. ;)

[tomtom0785]

In fiat models there is mostly a trick to skip the crash signal and start the engine,....
This trick works with switching flash lights on off in a certain time and order ;-)

[LaraVAG]

I try this, but don't works:

* turn ignition key to MAR;
* turn on right turn signal;
* turn off right turn signal;
* turn on left turn signal;
* turn off left turn signal;
* turn on right turn signal;
* turn off right turn signal;
* turn on left turn signal;
* turn off left turn signal;
* turn ignition key to STOP.

[tomtom0785]

it will not work if you are doing this in that order - you have to wait till turn indicator light in dash Shows you that you should Switch on Signal ;-) i also had same Problem with Fiat 500 - till i recognized to wait till control lamp Shows me in dash,..... i think description in tech book is not 100% correct ;-) hope this helps,....

[electrones]

Hi friends
I managed to redefine a rugged fiat doblo with this method very good
grateful

Cheers

[bobolin4o]

Those Italians make fun of their clients, right turn signal, left turn signal, blink, maybe horn twice... turn radio on, then off... f**ck, what is the point of this exercise...

[betrescudan]

hey, giovanni....why did you go there?
hmmm....for have from where return my friend....:laugh:

[pinotec]

process e2p file on meucci and delete crash signal

[patr]

fiat fiorino 100%works
turn ignition key to MAR;
* turn on right turn signal;
* turn off right turn signal;
* turn on left turn signal;
* turn off left turn signal;
* turn on right turn signal;
* turn off right turn signal;
* turn on left turn signal;
* turn off left turn signal;
* turn ignition key to STOP.

[smt]

do this steps with your scanner if not worked try this file

Connect the scanner to the Body Computer control unit,
& do this "Inertia switch reset (FIS)"

ecu eeprom repaired try & report

[maucontacto]

it will not work if you are doing this in that order - you have to wait till turn indicator light in dash Shows you that you should Switch on Signal ;-) i also had same Problem with Fiat 500 - till i recognized to wait till control lamp Shows me in dash,..... i think description in tech book is not 100% correct ;-) hope this helps,....

What do you mean?