2011 Rolls Royce Ghost cas4 flash

[samyboy]

hello every one
anybody could help
while i was reading eprom (5m48h 9S12XEP100 )i got message lost part of flash page 4 now car is completely dead no ignition no start no communication with car what so ever . so i was wondering if somebody have flash for this car or they can fix the flash

thanks

[lupu_sandu]

NEW CAS only is the solution, my opinion.

[smartymarti]

Balls the size of king kongs big brother

Why on earth would you touch this ????????
order a new cas , its only a bmw part end of day however i think through rr it will be a lot more , then you need either autologic or up to date icom to program in , best get hand in pocket, next time just put a can filter on it or walk away and save yourself the agro

[vageric]

hello every one
anybody could help
while i was reading eprom (5m48h 9S12XEP100 )i got message lost part of flash page 4 now car is completely dead no ignition no start no communication with car what so ever . so i was wondering if somebody have flash for this car or they can fix the flash

thanks
what device you have use to read cas with?

[samyboy]

Hi
This my problem I can't say no to any challenging Job , Lololo ,
I don't like using can filter on those ,
i already spoke what I use to read those 9s12xep100 in other thread ,
i already ordered anther cas4 , but I need to learn how to fix those cas4.
i already changed processor on this cas4 and I programmed it with other flash file I would get more reaction now from car like head light and remit controle lock and unlock and steering wheel up and down but still no ignition and no start , so I guess I need I good flash file for thus cas4 .
if somebody can help I really appreciated

thanks

[AlexandruP]

Restore the EEPROM from old CAS4 to new CAS4 and should bring to life.

[samyboy]

Restore the EEPROM from old CAS4 to new CAS4 and should bring to life.

Already did that

[rukartinatv]

I have dflash from cas4 5m48h
from f01 i will send you when i home.
Send me your email in private message.

[ammreid]

How did you get access to the CAS module on this vehicle? is it under dash left or right side? easy to get too?