Modus - steering IMMO -DF002

[cheester]

Hi everyone
Can someone please fix the dump from modus 2005 - fault DF002
Original steering rack was done by somone already and owner got another one from scrap yard.

Would like to virginize this from scrapyard just in case dump from original will not be good.

So file :
modus 24c16 ori - fix the fault DF002
modus 24c16 scrap ori - virginize

Thanks in advance!

[cheester]

Can somone check these dumps please? I know it can be fixed...I could do it myself but all ready fileas are with password

[dell66]

pass pm test et rapport

[cheester]

Thanks dell66, will try tomorrow. Car should start without Clip adaptation or first need to be done adaptation (new vin entry) and then car will start??

[cheester]

Can also someone fix ori dump with DF002 fault?

[cheester]

Anybody know how to fix this fault def002, please can someone help?

[cheester]

Dell66, your file doesnt work. Power sterring is not recognized :(
I have put your file in two modules and same, not recognized.
Can somone please fix ori file maybe?

[masmiquel]

Hi everyone
Can someone please fix the dump from modus 2005 - fault DF002
Original steering rack was done by somone already and owner got another one from scrap yard.

Would like to virginize this from scrapyard just in case dump from original will not be good.

So file :
modus 24c16 ori - fix the fault DF002
modus 24c16 scrap ori - virginize

Thanks in advance!

Sorry, but your ori file is corrupt and i cant repair your dump. I havent got any virgin file for this steering.

Sorry Cheester. I would like to help you.

[cheester]

Masmiquel what you mean corrupt? By my programmer?
Read by XprogM out of board. Or corrupt like others with DF002 fault code?

[cheester]

Anyone have maybe another virgin file what will be work?

[cheester]

Thats the more details about car and ori sterring rack, maybe some one will be able to make working file.

230749230750230751230752

[masmiquel]

Masmiquel what you mean corrupt? By my programmer?
Read by XprogM out of board. Or corrupt like others with DF002 fault code?


Compare your dump with mine and you will see that your dump is corrupt.

Test this file and report.

[cheester]

File is good but car still can not start. I can connect with stirring module and its recognized. Well done masniques!!
Only fault code in UCH - DF048, incorrect code between UCH and steering wheel . No fault in steering wheel module, Did all adaptations....nothing helped
Any ideas??

[cheester]

Mates is there any chance to do IMMO off for this model?
ECU is Siemens SIM32 no S120200102

[sosmecano]

yes post your original dump

[cheester]

sosmecano are you sure I will be working? have done some reading here and no chance to do IMMO OFF on this ECU, in some cases work with immo emulator.
I was thinking to maybe replace dumps from other car in ECU,UCH and sterring rack and program the key? That would work?

[shadow12]

hi, I can send you virginized steering dump tomorrow, 100% tested

[cheester]

shadow12 I have tried 4 different virgin files already and nothing work, steering rack not recognized by CLIP and any adaptation can not be done but please send yours one-I'll test any solution.
Im sure somone have 100% working dump from brand new steering rack provided by dealer, new one cost around 1000eur and nobody want to share :)

[dell66]

Hello, pass me your chassis No. modus for the meter in the file da occasion, I find little be.

[cheester]

dell66 chassis is on first pic on my post no 11
VIN number : VF1JP0K0532897006

[dell66]

Hello, test et rapport

[cheester]

Shadow12 have you got your 100% tested virgin file?

[shadow12]

Shadow12 have you got your 100% tested virgin file?
file attatched

[cheester]

Im going on the garage now with your file shadow12, but I think 24LC16 is different that 24C16 (24LC16 is 2006-up and can be virginized) but will try anyway

[sosmecano]

hello bro no immo off possible only withe imulateur . and only circuit.fr member can fix your problem he is the best in steering modus problems

[cheester]

I would say there is someone else same good as CIRCUIT.FR :) I had chance to tried his files and other members also but only one working 100% :)
dell66 BIG THANK YOU for your time and help, yours file is working perfect, dont know how did you manage it :) Car started first time. No faulty codes, no adaptation needed, you are magic!!

Thank you all for help. Problem sorted!!

[sosmecano]

good job mr dell66. cant you tel how you fix steering problems (methods of software) we are all interested

[masmiquel]

good job dell66.

cheester, thanks for report.