Volkswagen Touran Airbag Module Coding.

[VW786]

Hi, after getting the Defective control module error on VCDS, i went out and bought a brand new Airbag ECU. i did save an auto scan from the previous ECU. See Below,

Address 15: Airbags Labels: 1T0-909-605.lbl
Part No SW: 1T0 909 605 D HW: 1T0 909 605 D
Component: 04 AIRBAG VW8 021 0100
Revision: 02021000 Serial number: 003B9D0423VX
Coding: 0012340
Shop #: WSC 01324 785 00200
VCID: 3669577C415C62E


1 Fault Found:
00003 - Control Module

After installing the new ecu i go to the coding option and all credentials are '0000' which is normal.

i have a software coding, work shop code and also importer number?

i tried putting the coding number in software coding which is '0012340' and for the work shop code i was told 12345 would do the trick but after pressing do it. it bounces back with an error 'Coding Rejected, Error 31: Request Out Of Range!

with the software coding i had a look on the VCDS Site and they only put 5 digits in the software coding tab, is it because i put the two 0's before the 5 main digits? or am i supposed to put all 7 digits in?

VCDS Software & Cable is completely genuine.

[Maartinj]

Write your WSC etc to the VCDS setting , and if you go back to Airbag module -> codig, paste the oryginal coding , and VCDS should save all other coding too