Launch Control in EDC16

[herbon]

Hi mans. I need some help to activate Launch Control in EDC16. I saw solutions in bmw in a constant values changing the last(rpower thanks) Know launch control in vag edc15.. Also in this only have the "saw"map before gear dependant TL i tried setting 1 lower limit to 0 but it doesnt work.. who can help me?230918

[H.Wessel]

could you explain how to make a launch contron in vag edc15? I want to make it to my car and I can not fine any solution yet.

thanks
H.W

[ominimicu]

Launch control in edc15 can only be done in edc15P PD vag engines...quite easy to do actually

[H.Wessel]

yes only vag pd engines, I will takea look later

[herbon]

Yes edc15p have a map. The rest of edc15c2 like psa some solution like this edc16. In gear ratio treashold. Who can help with this?

[BrunoPT]

Launch control in edc15 can only be done in edc15P PD vag engines...quite easy to do actually

Wrong My Friend

Look this video by vw golf 1.9 TDI 110HP VP engine :)


http://www.youtube.com/watch?v=t7oXYRvyQ0Q&feature=c4-overview&list=UUyzmW6lUM2W_Hdtb8-eIaZQ
Launch control can do in all units EDC15 VAG (Audi, Seat, Skoda, VW) the units support them.

Regards

[ominimicu]

ohh i never looked into ohters i thought PD only :Dthanks

[herbon]

So anybody know what i have to do in first ratios? sometimes it block... only change under limit.. not the ratio treshold.. will test

[kennfeld]

Launch control in edc15 can only be done in edc15P PD vag engines...quite easy to do actually

even on vp and old MSA ecu's ...

[herbon]

So somebody can help me with this?

[herbon]

Finally i found it. So thanks for all..

Enviado desde mi HTC One mediante Tapatalk

[A3COSMIN]

hello, i have a3 2.0 tdi EDC16U1 and i try lot of test to implement launch control but the car is limit at desired launch revs only when the speed is more than 2km/h in neutral gear. for do that i change limit ratio to 0 and i limit the dependant Torque Limiter at desired rpm launch.. but why not limit when the car speed is 0. i post the orig file and the mod launch try, maybe anybody have a ideea and can help me .. thanks in advance

[gomarota]

would be nice know how to do on edc16 too, if you can share it would be great

[spawns3]

Wrong My Friend

Look this video by vw golf 1.9 TDI 110HP VP engine :)


http://www.youtube.com/watch?v=t7oXYRvyQ0Q&feature=c4-overview&list=UUyzmW6lUM2W_Hdtb8-eIaZQ
Launch control can do in all units EDC15 VAG (Audi, Seat, Skoda, VW) the units support them.

Regards


Don't forget to tell that ecu already have a 29f400 and u can do it by OBD plug ;) in old MSA ecus the launch control is not the same way.

[gomarota]

i attach file with launch control for edc16 for study, tested solution from other forum i dont remember name, would be nice to work together for have it working, i want to do in my car too.


NO PASSWORD ;)

[spawns3]

i attach file with launch control for edc16 for study, tested solution from other forum i dont remember name, would be nice to work together for have it working, i want to do in my car too.


NO PASSWORD ;)

It's the correct way 1?gear torque limiter active at 3000rpm ;)

[audi a3]

ho provato sulla mia e un audi 3 905 366 2.0 tdi 140 cv ma non va si ferma a 3400 giri no a 3000 giri allego file268055

[pinotec]

ho provato sulla mia e un audi 3 905 366 2.0 tdi 140 cv ma non va si ferma a 3400 giri no a 3000 giri allego file268055

you forgot to copy
0E10CC : 400 > 0

[raivwo]

Next behind Torque map, there is 2x2 launch control like in EDC15. You can redefine it with more values, there is enough space filled with ''3000'' unused values.

[CustomCars]

LC can be made in the fact on almost all ECU's and all brands but for some needed do more advance work not only map change.
Later i will attach wideo from my EDC17.

[dreconx]

il hope i can get it working on my edc16 :(