USERS Repsoft Eraser HELP

[pierre renault]

Good day. Please any user of this developer, you can tell me if the circuit Dodas 35080 3.6, vp, v6, 080D0WQ und 160D0WQ ?

[rukartinatv]

Yes.its work very good 100%

[TULGEYWOODMAN]

Good day. Please any user of this developer, you can tell me if the circuit Dodas 35080 3.6, vp, v6, 080D0WQ und 160D0WQ ?

clone or genuine?

[pierre renault]

Clone ?????

[rrador]

Original works great...I am not aware of any clones of this tool

[javyb]

-----------

[markony79]

Chip-Eraser& Repsoft Eraser f?r BMW und OPEL - YouTube (http://www.youtube.com/watch?v=N5JkB0Kh6MM)

work good----perfect

I am not shore its exist the Clone !

[paulocallaghan]

Is it priced at 500 euros , ??I need to buy SUMTHING , codiprog2 is a joke

[pierre renault]

I requested information by email to ReSoft, LTD, and no response!
May want to know if someone selling RESOFT ERASER!

[markony79]

here Tachoteam.de: Tachoservice in Venlo, Niederlande (Holland), vormals in Kaarst bei Neuss, D?sseldorf und K?ln: Anfahrt (http://www.tachoteam.de/tachoservice.php)

ask for IVAN
but the owner is another guy...onluy on PM

[nebojsapejcic]

Markony79, do you know if they made special sd card for eraser? Ivan told me that they will make one, so it can save more then one file. Also he told this tool will be able to do more stuff, but I guess it wan?t happen ?

[markony79]

no the Tacho.de , Repsoft.....which is this tool, will not make nothing new, before they made the new machine (old Digiprog)

the M35xxx erraser have inside the 128mb memory, which can copy on computer, becouse its have only the USB port, dont use any another power for work

[nebojsapejcic]

Sorry for stupid question , but how do you copy file from eraser memory to your PC? When I connect eraser I can?t see it in My computer/... anywhere.

[rukartinatv]

Sorry for stupid question , but how do you copy file from eraser memory to your PC? When I connect eraser I can?t see it in My computer/... anywhere.
You cant transwer file to pc.
Only the last file in erazer stay
so you can restore the last only
My suggestion before you change km with erazer
safe with another programer the file.
Erazer work 99% on some rangerover you have to desolder the eprom
dosent work on the board.

[pierre renault]

sorry but I can not contact the sellers of REPSOFT ERASER some help?

[pierre renault]

sorry but I can not contact the sellers of REPSOFT ERASER some help?

[zoyzoyni]

and if you have answer maybe will be after a year.most eraser work for some time and after damaged.best solusion is r270.

[rukartinatv]

Not this erazer.
this one work on 2cek:)
you just press read the change
and its take not more then 2 3 cek.
r270 its china garbage.

[teerak2uk]

Not this erazer.
this one work on 2cek:)
you just press read the change
and its take not more then 2 3 cek.
r270 its china garbage.

China garbage - yes
Cheaper to buy - yes
Erases m35080 family - yes

[rukartinatv]

China garbage - yes
Cheaper to buy - yes
Erases m35080 family - yes
you are right.
but i dont like to buy china clone specially when i do bmw.
I like to pay for original

[antibisic]

China garbage - yes
Cheaper to buy - yes
Erases m35080 family - yes


Only if you remove chip?But repsoft erase in circuit

[pierre renault]

I experienced BMW E46 dash and CORSA D, does not work in the circuit. Anyone know why it did not work? Will try to read hears noise in motors needles, lights lights will also try to read. Some help?

[javyb]

I experienced BMW E46 dash and CORSA D, does not work in the circuit. Anyone know why it did not work? Will try to read hears noise in motors needles, lights lights will also try to read. Some help?

Be careful with corsa d as if u read write it will wake up processor and corrupt the dash if reading at 5v

[pierre renault]

friend, then the best and do the circuit corsa d? and other Astra and BMW?

[pierre renault]

friend, then the best and not making the circuit corsa d? and other Astra and BMW?

[javyb]

friend, then the best and not making the circuit corsa d? and other Astra and BMW?

BMW are safe to do in circuit astra and corsa d remove EEPROM also remove for rangerover

[teerak2uk]

I remove all, prevention is better than a cure

[smartymarti]

Only vauxhall I remove everything else in circuit rr or BMW etc , although vp can be awkward

[pierre renault]

Experienced in BMW 1 2005 35080 6 circuit does not work CONNECTION LOST! For me it did not work at all, not corsa d, h not astra, bmw e46 no, not bmw s1. And people say this crap works 100%!! 499 euros

[rukartinatv]

For me work 99%
sometimes dont wark on old bmw m35080-3 or 6
but work very good for m35080vp dw80 35160
with out removing eprom.

[pierre renault]

Yes if you solder the eprom also works well for me, but circuit does not work! repsoft announces that works perfectly on circuit, which is a big lie! I buy for BMW5 2000-2004 to dash that you should not remove needles! Carry unable to do these dash and some that were replaced by new, brings a vp 35080. Works 100% or 99% is a lie! Circuit still can not do anything.

[gwee]

R270, cheap and good :)

[rukartinatv]

Yes if you solder the eprom also works well for me, but circuit does not work! repsoft announces that works perfectly on circuit, which is a big lie! I buy for BMW5 2000-2004 to dash that you should not remove needles! Carry unable to do these dash and some that were replaced by new, brings a vp 35080. Works 100% or 99% is a lie! Circuit still can not do anything.

I dont know what you are doing.
but since this erazer i bought 1.5 year ago
i naver desolder the eprom
meybe i did 2 times on old bmw

[pierre renault]

In my case what happens is the following circuit, the connecto eprom ok reading when I carry in CHANGE recevo information ((connection lost)).

[pierre renault]

I tried USB and PC, did an adapter for car cigarette lighter outlet with 3AMP 5v, but circuitry does not work! Sera that my ERASER REPSOFT have problems? Anyone else who can not program in circuit?

[nebojsapejcic]

I tried USB and PC, did an adapter for car cigarette lighter outlet with 3AMP 5v, but circuitry does not work! Sera that my ERASER REPSOFT have problems? Anyone else who can not program in circuit?


Mate I?m having the same problem with it. "lost connection" a lot of times it doesn?t work in circuit . Anyways it?s safer to desolder, extra 5 min.

[DARFVADER]

Best remove at that year of zafira !

[XmoDDeR]

i used on e87 did not work incircuit had to pull chip

[javyb]

anybody sellin thier repsoft eraser pm
RepSoft sell them 500 euros [emoji15]

[pierre renault]

all those who say that everything can eraser circuit is a lie !!

[rukartinatv]

all those who say that everything can eraser circuit is a lie !!
I use this eraser from day one
Its work in circuit 99%
the only you have to desolder eprom
its Range rover.
all another i never desolder.
so why you think avery body lie
here?
I dont sell this product why i will be lie?
Maybe codiprog dont work for you to?

[Dashcoder-Alexander]

the eraser works fine even in circuit, but with some dashboards you get in trouble because the output current is limited.
i always made a copy of the eep with another device but there was no need.
as far as i know its the only device that can erase 35160 without damaging the mileage registers.

main problem is that the device is not always available. if you send me a pm with your contact details i can give your order to the correct person.

until now i have never heard from a clone of this eraser

[rukartinatv]

I bought my from here
ivan.tachoteam@googlemail.com

[pierre renault]

Someone already managed to read circuit, CORSA D or ASTRA H starting from 2007? I could never read! BMW E 90% also not read circuit if ra that my REPSOF ERASER NOT WORK WELL ??

[Dashcoder-Alexander]

In some cases you have to shorten the oscillator

device is available and in stock info@repsoft.de direct or pm to me
276266

I am not the manufacturer i have only made this work to check why members here were not able to order it.

[pierre renault]

hello friend, could better explain (shorten the oscillator)?

[XmoDDeR]

hello friend, could better explain (shorten the oscillator)?


the legs of crystal on board , voltage issue

[pierre renault]

Can you explain me how, with details and photographs please ?

[88diablo]

Can you explain me how, with details and photographs please ?

Attack picture 2 with picture 1.277279277280

[pierre renault]

Good Morning. You said to shorten oscillator?
Where do you ocsilador !!!!!! I opened not anything to shorten !!!

[lama23]

Why not remove everytime then save data. load data onto one spare eprom with changes and try to program.. Always have data in original chip!
I use codiprog 1 and every now and again i find a chip that will not erase......hence a spare is needed.
regards

[rukartinatv]

Codiprog work very good
on pc software if you know what are you doing.
why remove eprom if you can eraze in 1 min
what i do i safe with dp3 first
than i eraze with reposoft erazer
on range rovers reposoft dont work
sometimes then i use codiprog.

[pierre renault]

REPSOFT ERASER , Once again !!! tool announced running at 100% on the circuit and does not work.

[pierre renault]

Because saying shorten oscillator is not possible?
You already he opened some (repsoft eraser) to shorten ocsilador say?
In my eraser is Repsof SMD as shortening ?????

[pierre renault]

DASHCODER ALEXANDER !!!!!!!
Because saying shorten oscillator is not possible?
You already he opened some (repsoft eraser) to shorten ocsilador say?
In my eraser is Repsof SMD as shortening ?????

[Hayssam1]

For me work 100%